How to completely turn off the sound of the alarm clock on Xiaomi Redmi 10: step-by-step instructions with nuances

The alarm clock on Xiaomi Redmi 10 suddenly started screaming in the middle of the night, and you can't find a way to turn it off? Or the sound is too loud, but the volume control doesn't work? This problem is familiar to many owners of Xiaomi smartphones - especially after the updates. MIUI, When the menu interface changes and the standard methods stop working, in this article we will look at all possible methods, from basic settings to hidden features and workarounds for Redmi 10 (including Redmi 10 2022, Redmi models). 10A, Redmi 10C and other modifications).

It is important to understand that the problem can lie not only in the alarm clock itself, but also in system sounds, volume profiles or even glitches. MIUI. For example, after updating to MIUI 14 Some users experience the alarm clock playing at maximum volume despite the set limits. We tested all methods on current versions of the firmware and highlighted those that work consistently.

If you need to turn off the sound right now, go to the quick way. For those who want to get a deeper understanding of the problem, we have prepared step-by-step instructions explaining why the alarm clock may be behaving inappropriately, and how to fix it forever.

⚡ How to Turn Off the Alarm in 10 Seconds

If the alarm is ringing and you need to turn it off immediately:

1. Press the volume/volume button on the side panel of the smartphone. MIUI This immediately turns off the alarm clock (but not the alarm clock itself!).
2. If it doesn't work, pull the notification curtain down and tap the alarm, and there may be a "Disable" button or a "Pause" button.
3. On the lock screen, swipe the alarm to the left (on some firmware, this turns off the sound, but does not delete the event).

⚠️ Attention: These methods only turn off the sound to the current signal. To prevent the alarm from ringing again in a minute (if you have a repeat set), you need to completely remove or reconfigure it - read about this in the next section.

🔕 Completely shutting down the alarm clock in settings

If you need to permanently remove the sound (for example, you use an alarm clock only for vibration or a connected smart bracelet), follow this instruction:

1. Open the Clock app (icon with dial).
2. Go to the Alarm tab (bell icon at the bottom of the screen).
3. Switch to an active alarm clock (or create a new one if needed).
4. Scroll down to the Sound block and select No Sound or Vibration Only.
5. Click Save in the upper right corner.

If there is no sound, your version MIUI He's hiding it, in this case:

• 🔊 Select any sound from the list (for example, by default).
• Then go back to the main alarm menu and reduce the volume to zero with the side buttons (sometimes this works).
• 📱 Install a third-party alarm app (such as Sleep as Android) where the audio settings are more flexible.

⚠️ Note: Some Redmi 10 firmware (especially with the MIUI 13) The alarm clock is set to system volume. If you have reduced the media volume to zero, the alarm clock may also be silent. → Sound and vibration → Loudness and make sure the alarm clock slider is not at zero.

🔧 Resetting alarm clock settings to factory

If the alarm clock is not behaving properly (for example, spontaneously turns on or plays the wrong sound), resetting its settings will help. This does not affect other data of the phone, but will return all alarm clocks to standard parameters.

1. Open the phone settings.
2. Go to the Apps → Application management.
3. Find the watch (or Clock) in the list and tap it.
4. Select Warehouse. → Clear the data.
5. Confirm the action. All alarm clocks will be removed and the settings will be reset.

After that:

• 🔄 Go to the Watch app and set the alarm again.
• 🎵 Choose No Sound or Adjust Volume.
• 📲 Check if the alarm clock conflicts with other apps (e.g. Google Assistant or Mi Fit).

💡

If the alarm keeps ringing after all the manipulations, try turning it off through Google Assistant. Say, "OK, Google, turn off the alarm," sometimes even when the screen is locked.

🛠️ Alternative methods: if the standard methods do not work

If none of these methods worked, the problem could be deeper. Here's what else you can try.

1. Disconnect via Google Clock (if installed)

Some Redmi 10 users are installing Google Clock as an alternative to the standard app, to turn off the sound in it:

1. Open Google Clock.
2. Go to the Alarm tab.
3. Put it on the active alarm clock.
4. Click on the bell icon (Alarm clock sound) and select No sound.

2.Use of the "Do Not Disturb" mode

If the alarm clock rings at an unskilled time, you can block its sound through Do not disturb:

1. Open Settings → Sound and vibration → Do not disturb.
2. Turn on the mode and set exceptions.
3. Make sure that the Allow Interruptions section has turned off alarm clocks.

⚠️ Warning: This method will turn off all sounds (calls, notifications), so only use it if there are no other options. Also check if it conflicts with the alarm settings - sometimes MIUI ignore exceptions.

3. Removal of the App updates Watch

If the problem started after the update MIUI, Try to roll back the app version:

1. Go to Settings → Applications → Application Management → Watch.
2. Slip on the three-point in the upper right corner and select Remove Updates.
3. Confirm the action and restart the phone.

🤖 Problems after update MIUI: Why the alarm clock doesn't listen

Xiaomi regularly releases updates to the MIUI, But sometimes they break the standard functions, like when you upgrade to the MIUI 14 Many Redmi 10 users are faced with the fact that:

• 🔇 The alarm clock is playing at maximum volume despite the settings.
• 🔄 No changes in sound profiles are maintained.
• 📵 Volume buttons do not affect the alarm clock.

This is because in the new versions MIUI The alarm clock's sound is tied to the system mixer, not to a separate regulator, to fix it:

1. Open Settings → Sound and vibration → Volume.
2. Make sure the alarm clock slider is not at its maximum (sometimes it resets after an update).
3. Turn off the option Smooth Volume Up – it may conflict with alarm settings.
4. Reboot your phone to make the changes take effect.

If, after updating, MIUI 14.0.4+ The alarm still does not turn off - try to roll back to the previous version of the firmware through Settings → The phone. → Updating the system → Three points. → Select the update package (needs a firmware file).

📱 Third-party applications for alarm clock management

If you don't like the standard Xiaomi alarm clock, you can use alternatives that offer more flexibility in setting up sound, vibration and replays. Here are the best options for Redmi 10:

To set a third-party alarm:

1. Download the app from Google Play.
2. Open it and set the alarm (most apps have the option of No Sound or Vibration Only).
3. Turn off the standard Xiaomi alarm to avoid conflict.

⚠️ Warning: Some third-party alarms (such as Alarmy) may ignore the "Do Not Disturb" settings. If you want your alarm to only work at certain times, manually set the exceptions.

💡

Third-party alarms often offer more options for tuning the sound, but can drain the battery faster because of background activity.The best option is Sleep as Android for those who follow sleep, and Google Clock for minimalists.

🔄 What to do if the alarm clock itself turns on or glitch

Sometimes the alarm clock on Redmi 10 starts to behave strangely: it spontaneously turns on, plays the wrong sound or goes off at random.

• 🤖 Conflict with another application (e.g. Mi Fit, Google Assistant, or Bixby if you installed it).
• 📱 Damaged Application Data Watch.
• 🔄 Gluck MIUI post-refresh.
• ⚡ Hardware problem (for example, speaker or volume button malfunction).

Here’s how to diagnose and fix the problem:

1. Verification of conflicting applications

1. Go to Settings → Applications → Application Management.
2. Sort the applications by installation date (click on three dots) → Time-sorting).
3. Remove or disable newly installed apps that can manage alarm clocks (such as fitness trackers or assistants).

2.Reset all sound settings

Sometimes it helps to completely reset sound parameters:

1. Open Settings → System and device → Resetting settings.
2. Select Reset sound and vibration settings.
3. Confirm the action and restart the phone.

3. Checking hardware buttons

If the alarm goes off on its own, the volume button may have stuck or the screen sensor is false.

• 🔍 Check the buttons for physical damage.
• 📱 Install the Button Tester app from Google Play and check if false clicks are being fixed.
• 🔄 If the problem is in the buttons – contact the service center (on Redmi 10 their replacement costs 500-1000 dollars). ₽).

❓ FAQ: Frequent questions about the alarm clock on Xiaomi Redmi 10