How to turn off vibration when responding to a Xiaomi subscriber: Deep setup

Modern Xiaomi smartphones running MIUI shells or the new HyperOS provide users with extensive tools to personalize their tactile experiences. However, it often happens that the default settings create excessive noise and distract at inappropriate moments. Especially annoying is the constant vibration when pressing call buttons, completing a conversation or even dialing in the Phone app. Many device owners are faced with the question of how to get rid of this intrusive effect without sacrificing important notifications.

The problem is that the tactile response management system in the Chinese brand’s smartphones is distributed across several different menus. Response vibration and interface vibration are often different settings that need to be adjusted separately. If you’re used to silence or just don’t like it when the phone shakes in your hand every time you touch the screen, you’ll have to go through all the hidden corners of the settings. In this article, we’ll take a look at every step you need to take full control of your device’s tactics.

It is worth noting that the location of the items may vary slightly depending on the version of the Android operating system and the specific model of your gadget, whether it is a budget Redmi or flagship Xiaomi. We will consider universal ways that are relevant for most current versions of firmware. Properly configuring these parameters will not only increase comfort of use, but also, perhaps, slightly save battery power, since the vibrator motor is a mechanical element that consumes energy.

Global tactile response settings in the system

The first place that you want to go to a user who wants to remove the extra vibrations is the main settings menu, and that's where the basic switches that control the behavior of the phone as a whole are located. Often users look for a solution in the call app, forgetting that the root of the problem lies deeper. Open the settings and find a section that may be called Sound and Vibration or just Sound.

Within this section, you'll find a lot of sliders and tumblers. We're interested in the block that's associated with the tactile response of the system. It's important not to confuse the vibration of the call (when someone calls you) with the vibration of the interface (when you do something yourself). We need to turn off the secondary effects. Find the point Vibration when you touch or Vibration when you interact. If the slider is active, the system will vibrate every time you press the screen buttons, switch the switches toggles and switch between the menus.

⚠️ Warning: Turning off system vibration can make the interface less responsive to the touch. If you are used to feeling confirmation of actions, try first just to reduce the intensity in the Vibration Force item, if your Xiaomi model supports this feature.

Also on this menu, there is often a separate switch for vibration of the keyboard. Even if you turn off the system vibration, the virtual keyboard can continue to vibrate when typing, as this is the setting of the input application itself. Make sure that all sliders containing the words "touch", "press" or "interface" are put into an inactive state.

• 📱 Go to Settings. → Sound and vibration.
• 🔇 Find the Additional Sound Settings section (you may need to click on three dots in the corner).
• 🚫 Turn off the toggles Vibration upon touch and Keyboard Vibration.
• 🔉 Check the vibration power settings for calls and notifications to make sure they are set up correctly.

Set up vibration in the application "Phone"

Even after a global change in the system, the call app may have its own priority settings. Xiaomi smartphones most often use a standard Google caller or a proprietary MIUI Dialer app. The logic of the setup is similar, but the paths may differ, and this is where the answer to the question of how to remove vibration when dialing and when connecting with a subscriber lies.

Open the Phone app (green handset). In the upper right corner, click three dots or a gear to get into the Settings menu. Look for a section called Incoming Calls or Answers and Call Ending. In some firmware versions, this item can be hidden inside the Sound and Vibration tab right inside the call app.

Here you'll find the parameters that govern the tactile response to a call, and you should be interested in things like Vibration when dialing, Vibration when connecting, and Vibration when calling. Disabling vibration when connecting is especially important for those who are holding a phone to the ear, because a sudden start of the motor can be unpleasant.

It’s worth mentioning that in newer versions of HyperOS, Google is implementing its own standards, and some features may migrate. If you don’t find the specified items, try searching inside the settings of the app or phone itself by entering the word “vibration.” This often helps the desired switch faster than Locate, bypassing long searches on the menu.

• 📞 Launch the Phone app.
• ⚙️ Go to the settings menu (three dots or gears).
• 🔔 Select Incoming Calls or Sound and Vibration.
• ❌ Deactivate vibration options when dialing, connecting and retiring.

Control of keyboard vibration and text input

A common cause of complaints about “excess” vibration is the keyboard. When you type a message or look for a contact, the phone can vibrate every time you press a letter. This is a separate process that is not always dependent on the system settings of the sound, but is controlled by the input application itself, such as Gboard or Xiaomi Keyboard.

To remove this effect, go to Settings, then to Additional → Language and input. Here, select the active keyboard (usually the Gboard or MIUI Keyboard). In the menu that opens, find Settings or Preferences. That's where the Vibration switch is hidden when pressed.

Interestingly, some versions of the keyboard can adjust not only the vibration, but also the duration. If you think it's too radical to shut down completely, try to minimize the duration slider, which will make the response barely noticeable by keeping the tactile confirmation, but removing the annoying buzz, and also check if the vibration is on for special actions, such as moving the cursor or autocorrecting.

⚠️ Warning: After updating the application, the keyboard settings may reset to factory settings. Periodically check this section if the vibration when printing returned suddenly.

For users who often use voice input or handwriting, it is worth checking these sections in the keyboard settings, too, and sometimes there are separate tactile response tumblers for specific input modes that work independently of the main setting.

Specific settings for game mode and Game Turbo

Owners of gaming smartphones Xiaomi and POCO have probably encountered Game Turbo.This mode optimizes the system for games, but also adds its own vibration settings that can overlap the system. If you notice that the phone vibrates in games or even when you exit them, it is worth looking at the settings of the game accelerator.

Launch the Safety app (green shield), scroll down to the Game Turbo section. In the upper right corner, click on the settings gear. This could be Vibration or Tactile Response. In game mode, vibration is often used to enhance immersion, but in the real world, it can be just an unnecessary energy expenditure and a source of noise.

In addition, Game Turbo has settings for specific games. Going to the profile of a particular game, you can find individual audio and vibration settings that differ from the global ones. Make sure that there are no forced tactile effects for notifications of messages or calls during the game.

Turning off unnecessary effects in game mode is especially important for those who use the phone not only for entertainment, but also for work. The random vibration during an important meeting when the phone is lying on the table can be extremely inappropriate, even if there is a silent mode, but the vibrating response of the interface is active.

Use of special features for fine tuning

And underneath the Android settings, there's a special feature section that's designed for people with disabilities, but it can be useful for everyone, and there are tools that control the physical interaction with the device, and sometimes that's where the forgotten switches that make the phone vibrate hide.

Go to Settings → Advanced Settings (or Additional) → Special Features. Pay attention to areas related to hearing improvement or physical interactions. For example, Click Vibration can be activated here regardless of the main audio settings. This setting makes the phone vibrate when selecting list items or activating checkboxes.

It's also worth checking the app-specific availability settings. Some programs may request permission to use the vibrator for their notifications, ignoring the general "Do Not Disturb" settings. In the special features section, you can often see a list of services that have access to tactile recoil. Go through the list and turn off access for those applications that are not critical.

• ♿ Open the Settings. → Special facilities.
• 🔍 Find the Physical Interactions or Hearing Improvement section.
• 🚫 Turn off the Vibration option when selecting.
• 📱 Check the list of services with access to vibration and limit it.

Using these settings, you can achieve almost complete silence in tactile terms. The phone will stop shivering to any of your actions, becoming a completely calm device that will only signal in the event of an emergency call or alarm if you specifically leave these exceptions.

Comparison of settings in MIUI and HyperOS

With the release of the new HyperOS operating system, Xiaomi has significantly redesigned the menu structure. Users who upgrade from older versions of MIUI 14 or MIUI 13 may be confused without finding the usual switches.

In MIUI, vibration settings were scattered across different submenu inside the Sound section. Often there was a nesting: Sound → Additional → Vibration. In HyperOS, engineers tried to bring all the major switches to one level or combine them into more logical groups, and there was a single tactical control center where you could quickly turn off all kinds of vibrations in one fell swoop, or fine-tune scenarios.

Below is a table comparing the location of key settings in two shells so you can quickly navigate depending on your version of the software.

💡

If you've upgraded to HyperOS and can't find the old setting, search at the top of the Settings menu. Type the word "vibration" and the system will show you the actual path to the desired switch.

It's important to understand that switching to a new system is always stressful for a user who is used to a certain algorithm of actions. However, the new structure in HyperOS is considered more logical and understandable for beginners. If you are just planning to buy a device, consider that the interface may be different from the one you were used to on the previous smartphone.

Diagnostics of problems with vibromotor

There are times when a user wants to turn off the vibration, but the phone continues to vibrate randomly, or vice versa, the vibration has gone where it should be. This can indicate a software failure or, worse, a hardware malfunction of the vibrate motor. Xiaomi has a built-in engineering test to check this component.

To start the diagnosis, open the Phone app and dial the code ##6484##. The Engineering Test Menu (CIT) will open. Find the Vibrator or Vibration item on the list. The phone should start vibrating. If the vibration is flat, the hardware is fine, and the problem lies in the software settings. If the phone is silent or makes strange cracking sounds, it may be that the motor is damaged or the train has gone.

Also worth mentioning is Do Not Disturb, which is sometimes confused by users who are completely shutting down the audio, which is a mode where the phone may not ring, but it may vibrate when notified, unless otherwise configured. Check the settings for this mode if you want complete silence. HyperOS has made it more flexible to create schedules and scripts.

⚠️ Warning: If the vibrator makes a rattling, intermittent sound or is running in jerks, this is a sign of imminent failure. In this case, the software shutdown is only a temporary solution.

Timely diagnosis helps avoid more serious problems. The vibromotor is a physical mechanism, and it has a resource to work. Excessive load (constant vibration during games or navigation) can shorten its life, so turning off unnecessary effects prolongs the life of the device.

Frequently Asked Questions (FAQ)

💡

Completely disabling vibration on Xiaomi requires a comprehensive approach: you need to check the system settings, call parameters, keyboard settings and special features, only a consistent check of all these sections guarantees the desired result.