How to turn off vibration on Xiaomi Redmi: the complete guide

Modern Xiaomi and Redmi smartphones, which are based on MIUI shells or the new HyperOS, provide users with extensive personalization options. However, despite a thoughtful interface, standard tactile response settings can sometimes be annoying. Constant vibration when typing, pressing buttons in the system or receiving notifications can quickly drain the battery and distract from important tasks in silence.

Many device owners are faced with a situation where the standard switch in the audio menu is not enough. Android and its modifications from the Chinese manufacturer have several levels of control of tactile response. Deep tuning allows you to remove not only rattling of the case, but also the specific effects built into individual applications and system services. In this article, we will discuss in detail all available ways to make use of a smartphone as comfortable and silent as possible.

It is important to understand that completely turning off all vibrations can reduce the usability of the device, since the tactile response often serves as a confirmation of successful action. However, if your goal is maximum silence or battery saving, there are a number of methods that will help to achieve the desired result.

Basic adjustment of sounds and vibrations in the system

The first step to fully controlling tactile response is to use a standard settings menu that is available to every user without the need to obtain root rights. Most Redmi Note and Xiaomi Mi models have a unified path to the main switches, although the name of the items may vary slightly depending on the firmware version. First, you need to go to Settings and select Sound and Vibration.

This is where the main slider is, which is responsible for vibration in No Sound mode. However, to turn off the tactile response in Sound mode, you need to click on the mode name or find a separate switch "Vibration in Sound mode." MIUI system logic separates these two states, which often causes confusion for users accustomed to pure Android. Make sure that both sliders are set to a minimum position or turned off completely.

Next, you should look at the touch vibration section, which is responsible for the tactile response of the interface: pressing navigation buttons, menu switches and other controls. Xiaomi engineers have implemented this feature to improve the user experience, but many prefer to turn it off for the sake of energy.

It is worth noting that even after all visible switches are turned off, some system sounds can be accompanied by a slight jitter of the case, which is due to the fact that the audio engine of the system can prioritize certain notifications. If standard methods have not completely eliminated the problem, it is worth checking the settings of specific applications, such as the phone book or messages, where there may be independent vibration settings.

Control keyboard vibration and text input

One of the most common causes of annoying vibration is the tactile response of the virtual keyboard. By default, every time you press a letter, the smartphone emits a short but tangible tremor. To remove this feature, it is not enough to just turn down the volume, since this is a separate setting in the settings of the input application itself. Most often on Xiaomi devices, the G keyboard or the built-in MIUI Keyboard is used.

To turn off the vibration on Gboard, you need to go to the Settings menu, find the Settings section and select Language and input. Then click on Keyboard Management and select the active keyboard. From the menu that opens, find Settings, then go to Preferences. This is where the Vibration at Keystrokes slider hides, which you need to move to the leftmost position or turn off completely.

If you use a standard keyboard from Xiaomi, the algorithm of actions will be similar, but the path may differ. Usually the settings are directly in the keyboard interface: press and hold the space button or the settings icon on the toolbar, then select Settings → Vibration when pressed. The accuracy of the settings here can be high: some keyboards allow you to adjust the vibration duration in milliseconds, which allows you to leave a barely noticeable response instead of completely turning it off.

The brain processes confirmation of action faster through vibration than through visual signal, so once you turn off this function, give yourself time to adapt. If you type often in the dark or without looking at the screen, a complete rejection of tactile response can lead to an increase in the number of typos.

Disabling vibration in applications and notifications

System settings are just the tip of the iceberg. Many of the apps installed on your Redmi have their own notification priorities that can ignore general audio settings. Social media, messengers and games often impose their own vibration rules. To achieve complete silence, you need to audit the applications and customize each one individually.

Start with the most important messengers, such as Telegram, WhatsApp or Viber. Go to the settings of a particular application, find the Notifications section and turn off the Vibration option. Modern versions of Android and MIUI also have a more flexible notification channel system. Go to Settings → Notifications and Status bar → Notification Management, select the desired application and find a specific notification type (such as Personal Messages).

Many users don't know that the sound settings inside the game often have a separate item called Vibration or Haptic Feedback. Game engines use vibration to simulate shots, collisions or damage. If you want to immerse yourself in the process without physically affecting your hands, be sure to check the audio settings in the Options or Settings section of the game itself.

Also worth mentioning are system services like alarm clock and calendar. Even if the phone is silent, the default alarm vibrates. To change this behavior, open the Watch app, go to the specific alarm settings, and select the "Only Sound" or "Sound and Vibration" signal type, where you can remove the tick from the vibration. Similar actions should be done for reminders in the Calendar app, as they often go unnoticed sources of unnecessary noise.

Setup of vibration of the call and contacts

Vibration control during an incoming call has its own specifics, as it involves a communication module. In Xiaomi and Redmi phones, there is the ability to adjust vibration for specific contacts or groups, which can create confusion: one call vibrates and the other does not. To globally disable the vibration of the call, go to the Phone app (green handset), click on three dots in the corner of the screen and select Settings.

In the menu that opens, look for the "Incoming Calls" or "Vibration" section, and here you'll see the "Vibration" switch, which will stop the phone from shaking on any incoming call if "No Sound" or "Do Not Disturb" mode is enabled. However, if the phone is in Sound mode, it can ignore this ban depending on the MIUI version. In this case, you need to activate the "Do Not Disturb" mode and configure its exceptions, leaving only a visual alert.

For advanced users, you can customize vibration patterns. While this doesn't shut down the function completely, creating a pattern with a minimum duration or no duration can be helpful. Go to Settings → Sound and Vibration → Vibration (or "Vibration Pattern"). Here you can choose "No" or create your own by removing all the pulses. Customization makes the call almost silent, leaving only a signal visible only in your pocket.

💡

Use In Your Pocket mode for smart vibration. In your call settings, turn on Vibration in Your Pocket. The phone will only vibrate when the proximity sensor is closed (phone in your pocket), and will remain quiet if it is on the table with the screen up.

Remember video calls. Apps like Duo, Skype, or Instagram calls can use system settings or their own. Check them separately if you want to rule out any audio or tactile surprises during communication. Often, notification settings for video calls are placed in a separate category in the Android notifications system menu.

Use of Do Not Disturb Mode and Schedules

The most effective way to guarantee that all vibrations on Xiaomi are turned off at a certain time is to use the Do Not Disturb mode, which is designed specifically for situations where the phone should not distract the user with either sound, vibration, or light. You can activate it through the notification curtain or in the Settings menu → Sound and vibration → Don't disturb.

The main strength of this mode is the flexibility of setting schedules. You can set up automatic activation of the Do Not Disturb mode every night, during meetings on the calendar or in a given place (for example, in a cinema determined by geolocation). In the mode settings, be sure to choose the option "Total Silence" or manually turn off vibration for calls and notifications. Automating the process will save you from having to manually check the settings every evening.

It is important to set exceptions correctly so you don't miss a really important call. There is an exceptions section in the Do Not Disturb menu. Here you can allow calls from Favorites or repeat calls (if the same number rings twice within 5 minutes), which helps to maintain the balance between silence and availability. Vibration for allowed exceptions can also be turned off separately in the advanced mode settings.

💡

Do Not Disturb mode with a customized schedule is the only guaranteed solution that will cover any system bugs or settings of individual applications, providing absolute silence at a given time.

There is also a "In your pocket" feature in the context of Do Not Disturb mode, which allows the phone to respond to calls with vibration only when it is in the dark (in your pocket or bag).This is achieved by using a light sensor. If the phone is lying on the table with a screen up, it will not vibrate even if the "Do Not Disturb" mode is turned off, but the corresponding smart feature in the call settings is activated.

Special features and additional settings

Deep in the MIUI and HyperOS system, there are sections for people with disabilities that also affect tactile response. The Special Features section contains tools that can both add and remove vibration. For example, the Audibility Improvement or Hearing Aid function can change the nature of vibration. Check these settings if standard methods fail.

The unlock vibration feature deserves a special mention, and it can be displayed in a separate menu item or in the lock screen section. If your phone vibrates every time you swipe through the fingerprint scanner or enter a pattern lock, look for this option in the lock screen settings or in the passwords and security section. Biometric data is often accompanied by tactile confirmation, which can be disabled for greater secrecy.

For some Redmi models with AMOLED-There's a Haptic feedback feature that works at the level of the display drivers, and it makes you feel like you're pressing a physical button. It usually turns off in the "Additional Settings" section. → Advanced settings → Vibration: You can adjust not only the presence, but also the strength of the effect, choosing between light, medium and strong».

In conclusion, vibration control on Xiaomi and Redmi smartphones is a multi-level system. From simple volume sliders to setting up individual applications and modes of operation, the user has complete control over the tactile sensations. Competent setting of all these parameters will make the use of the smartphone comfortable in any environment, whether it is a meeting, a movie theater or a quiet night.

Questions and Answers (FAQ)