Modern users often face a problem when even high-quality TWS-The Xiaomi Airdots 2 (also known as the Redmi Airdots S) is no exception, although it has an ergonomic design. Proper fitting of the device directly affects not only the comfort of wearing, but also the quality of the sound reproduced, especially in low frequencies.
Many owners mistakenly believe that the discomfort is due to defective or bad shape of the ear, but in most cases, the problem lies in the wrong size of the earpieces or the violation of the technique of inserting the device into the auditory canal. In this article, we will discuss in detail the anatomy of the planting and the algorithm of actions for perfect fixation.
First, you have to understand that Xiaomi Airdots 2 have a standard design of inserts with silicone nozzles. The tightness of the fit is a key factor in success. If the air passes between the ear and the earpiece, there will be no bass, and the device will hold worse, so the first step should always be careful preparation and inspection of components.
Planting Anatomy and Choosing the Right Size
Complete with headphones usually come with three pairs of silicone nozzles of different diameters: S, M and L. The factory nozzle installed on the device is most often medium size (M). However, the anatomy of the ear canals is individual for all people, and the standard size may not suit you. To check the size, you need to remove the headphones from the case and visually assess the density of the fit.
If you feel like the device is dangling or falling out when you open your mouth, you're not getting the right size, too small will not create the necessary vacuum effect, and too big will press on the cartilage, causing pain. Experts recommend trying all three options to find the perfect balance between comfort and fixation.
⚠️ Warning: Never try to wear Xiaomi Airdots 2 without silicone nozzle.Smooth body plastic doesn't provide traction to the skin and can easily slip out, causing the device to break when it falls.
The process of replacing the nozzle is simple, but it requires care. Take a new silicone part and tightly pull it on the earpiece's sound hole until the characteristic click or stop, make sure that the speaker mesh is not covered with material, and the nozzle sits smoothly, without distortion, only after that you can start inserting into the ear.
Technique of proper introduction into the ear canal
There is a common misconception that you just need to insert headphones right into the ear canal. In fact, for the Xiaomi Airdots 2 and many other models, there is a more efficient method that takes into account the bends of the ears. First, take the earphone with your fingers by the body, avoiding touching the microphone holes.
With the second hand on the opposite side of your head, pull the ears up and back a little bit, and this action straightens the ear canal, opening a straight path for the device, and then you gently insert the earpiece and turn it around a little bit so that the silicone nozzle extends inside and creates a sealed seal.
After the injection, release the ear. You should feel a slight pressure and a change in the sound pattern, the external noise will become muffled. This is a sign of the correct passive noise insulation. If the sound is ringing and open, then the tightness is not achieved, and the procedure should be repeated, perhaps changing the size of the nozzle.
☑️ Checking the correctness of landing
Importantly, the left and right headphones are labeled L and R respectively. The mixed sides are not only uncomfortable, but can distort the stereo panorama when listening to music or watching movies. Always check the matching sides before using.
Solving the problem of loss in sports
Active exercise creates additional vibration and sweating, which reduces the friction ratio between silicone and skin. Even the perfectly matched Xiaomi Airdots 2 can start to slide while running or exercising. In such situations, standard methods may not be enough, and additional fixation measures are required.
One of the most effective solutions is to use special sports hooks or "ear fixers," which are put on the headphone body and rest on the inside of the ear shell (goat), creating a mechanical stress, which prevents the device from falling out even when the head jerks sharply.
- 🏃♂️ Use silicone wing-holders for additional support.
- 💧 Wash your ears and headphones with a dry wipe before exercising to remove moisture.
- 🎧 Consider buying memory foam nozzles (Comply) that expand in the ear.
Also, consider that when sweating heavily, the oily film on the skin contributes to the slippage, regular hygiene of the ears and the headphones themselves helps maintain normal levels of grip. Don't ignore this aspect, as falling on a hard gym coating can be fatal for electronics.
💡
If there are no sports fixers at hand, you can temporarily use a small piece of medical patch pasted on the outer part of the headphone to increase friction against the skin.
Diagnostics of sound problems in case of improper landing
Incorrectly worn headphones often cause complaints about a quiet sound or lack of bass, users think that the device is malfunctioning, and go to the service center, but in 90% of cases the problem is solved by simply adjusting the position of Xiaomi Airdots 2 in the ear.
If there are no low frequencies, there is a gap between the speaker and the eardrum. A low frequency sound wave requires a closed volume to create pressure. Without tightness, the bass "evaporates" and the sound becomes flat and metallic. Check if the nozzle sits tightly.
| Symptoms. | Probable cause | Decision |
|---|---|---|
| Quiet sound | Breaching of the seal | Replace the nozzle with a large one |
| No bass. | Gaps in the auditory canal | Press or insert deeper. |
| Discomfort/pain | It's too big. | Use a size S nozzle |
| Loss when walking | Smooth surface/sweat | Use the fixtures or wipe |
Another cause of sound distortion can be sulfur plug or contamination of the speaker grid. Regularly check the condition of the filters. To clean, use a dry soft brush or cotton swab, but do not pick inside with sharp objects so as not to damage the membrane.
Hygiene and headphone care
Contact with skin and earwax requires regular accessory care. Hygiene is important not only for aesthetics, but also for health. The accumulation of bacteria on Xiaomi Airdots 2 silicone nozzles can lead to inflammation in the auditory canal.
It is recommended to wipe the headphones with an antibacterial napkin or a cloth slightly moistened in alcohol solution after each intense workout. Silicone nozzles can be removed and washed under warm water with soap, but before installing them back, they must be completely dried.
⚠️ Attention: It is strictly forbidden to wet the headphone case or case. Moisture that gets inside through the holes of the microphone or speaker will cause oxidation of contacts and irreversible failure of the device.
Keep the device in a closed case when not using it, it protects against dust, which can also clog the speaker grid and impair sound quality, a clean case is the key to long battery life and stable connection.
How often do you change the nozzles?
Frequently Asked Questions (FAQ)
Can I wash silicone nozzles in hot water?
Why does the left earpiece fall out more often than the right?
Will Airdots 2 be stuck in your ears without silicone nozzles?
How do you know if the squirrel has broken?
💡
The key to comfortable use of Xiaomi Airdots 2 is individual selection of the size of the nozzle and the correct introduction technique with ear pull.