Xiaomi Airdots wireless headphones have become a hit thanks to their affordable price and compact size, but many users experience discomfort when using them. Improper landing not only causes ear pain after an hour of listening, but also significantly worsens the sound quality, depriving bass and creating an “emptiness” effect. Understanding the anatomy of the auditory canal and the design of the device is the key to a comfortable experience.
In this article, we will discuss in detail the technique of fixing the headset, the choice of optimal earpieces and secrets that will help you forget that the gadget is in the ear. Proper fitting is also critical for the operation of the noise reduction system and the quality of the microphone when calling.
Planting anatomy and choice of embushures
The first thing to do before you put on the Xiaomi Mi True Wireless Earbuds is to determine the size of the ear canal. The kit usually comes with three pairs of silicone nozzles: S, M and L. The default device has medium (M) that fit most people, but the individual anatomy may require replacement. If the earbud bulges out or, conversely, falls too deep, causing pressure, the size is wrong.
To test the density of the fit, you can run a track with pronounced low frequencies. Perfect insulation means that extraneous noise hardly penetrates the inside, and the bass sounds volumetric, not flat. Silicone must gently but confidently hold the body in the sink, without requiring constant correction by the hand.
⚠️ Note: Using improperly sized ear cans can cause inflammation of the ear canal or rapid hearing fatigue due to constant pressure on the walls.
Standard silicone slides when sweating, so for sports, it's best to consider buying Memory Foams, which take the shape of an ear when exposed to body heat, providing maximum fixation even when the head is active.
Technique of proper introduction of the headphone
There is a common mistake where users insert Airdots strictly perpendicular to the ear, just pushing them inside. The design of the human ear canal has a bend, and direct input often causes the speaker to rest against the wall rather than head deep. To wear the gadget correctly, you first need to slightly pull the ear shell up and back (for the right ear with the right hand, for the left - left).
After the channel is ready, insert the headphone body with a light twisting motion. Many Xiaomi models have an ergonomic bend that should repeat the contour of the cartilage. The fixation is not due to the depth of immersion, but due to the emphasis on the curl (the protrusion inside the sink). If you feel that the earphone is held "dead" without pressure on the channel entrance, the position is found correctly.
☑️ Checking the correctness of landing
It's important to keep track of the orientation of the device itself, and on the inside of each earbud, there's a label called L (left) and R (right), and the sides that are confused will not only cause discomfort, but also disrupt the stereo, which will make the sound "inside the head" rather than around.
Use during sports and activity
Active movement is the main test for any wireless headset. When running or training in the gym, sweating can reduce the friction of silicone against the skin, which will lead to slippage. To wear Xiaomi Airdots during sports without the risk of loss, it is recommended to wipe the ears and the earbrushes with dry cloth before wearing them.
For extreme loads, there are special accessories, such as silicone ears or hooks, worn on the headphone body and clinging to cartilage. Although the regular design of the Mi True Wireless Earbuds Basic is light enough, an additional anchor of fixation will never hurt. Also avoid models with glossy coatings if you plan intensive classes.
⚠️ Warning: At high loads, check the landing every time 15-20 Even a millimeter shift can cause the earphone to slip out unnoticed.
Don't forget to exercise hygiene. Sweat, getting inside the membrane of the speaker, can damage the membrane, and on the ear create a favorable environment for bacteria.
Can I wash Xiaomi Airdots with water?
Impact of landing on sound quality and microphone
The quality of the playback depends on the tightness. If there is a gap between the silicone and the ear wall, the low frequencies (bass) evaporate, making the sound thin and ringing. The acoustic resistance must be complete. In addition, in models with active noise cancellation (ANC), a loose landing causes the algorithms to work incorrectly, creating an unpleasant whistle or hum.
The microphone also suffers from improper wear. The microphone hole is often located on the leg or bottom of the body. If the earphone is turned or inserted curved, your voice will sound to the interlocutor as "from the barrel" or with strong wind noise. The microphone position should be directed downwards to the mouth, but not overlaid by the collar of clothing.
The table below shows the symptoms of improper landing and how to eliminate them:
| Symptoms. | Probable cause | Decision |
|---|---|---|
| Quiet sound, no bass. | Untight fit | Replace the nozzle with a larger or tighter insert |
| The interviewer can't hear you. | The microphone is closed with a finger or hair. | Check the position of the headphone leg |
| The headphone falls out when walking | Slippery silicone or small size | Degrease the ear, change the nozzle to foam |
| Ear pain in 30 minutes | Too big a size or depth | Use a size S nozzle |
Hygiene and device care
Regular socks also mean regular cleaning. Earwax is the main enemy of the speaker grid. Over time, it accumulates, clogs holes and can even penetrate the body, causing wheezing. Cleaning should be done at least once a week if you use the gadget daily.
Use a soft dry brush or cotton swab slightly soaked in alcohol (need to be squeezed carefully). Rub the outside and the net, but don't press hard. The inside of the ear canal that contacts the silicone will be suited with a wet wipe without alcohol to keep the skin dry.
💡
Keep the headphones in the case only completely dry. The humidity inside the closed case is the perfect environment for bacterial reproduction and oxidation of charging contacts.
Keep an eye on the condition of the case itself. Dirt at the bottom of the charging compartment can prevent contact, causing the headphones to discharge while you think they're charging. Wipe the contacts with a dry cotton swab once a month.
Typical User Mistakes
One of the most common mistakes is trying to wear one earbud while the other is charging for a long time. Although Xiaomi Airdots support mono mode, constantly wearing one device in one ear can lead to an imbalance in hearing aid load and fatigue.
Another mistake is ignoring firmware updates: Mi Home or Xiaomi Earbuds (for Android) sometimes release patches that improve touch sensors and connection stability. Software optimization can fix landing recognition problems (autopause upon retrieval).
⚠️ Warning: Do not use sharp objects (needles, toothpicks) to clean the speaker mesh. You can easily pierce the membrane, after which the earphone will stop working and lose the warranty.
And users often forget about temperature, leaving headphones in the sun or in the cold is a risk to the lithium battery. Extreme temperatures destroy the chemical structure of the battery, reducing battery life.
💡
The correct fit Xiaomi Airdots solves 90% of the problems with sound: if the bass is missing or the headphone falls out, it is not a marriage, but the size of the nozzle or input angle.