The popularity of wireless headphones from the Chinese giant Xiaomi is due not only to the affordable price, but also to the really high-quality sound for its segment. the Redmi AirDots series models have become bestsellers, but many users have difficulties with initial configuration and proper pairing of devices. Incorrect execution of the procedure can lead to the fact that the headphones will not synchronize with each other or work only in mono mode.
In this detailed guide, we’ll break down all the steps of connecting, from unpacking to fine-tuning through third-party apps. You’ll learn how to avoid the common mistakes that beginners make when first starting True Wireless headsets. Proper initialization ensures a stable Bluetooth connection and maximum battery life.
To start, make sure your headphones are fully charged. Even if you just took them out of the box, it is recommended to put the case on charge for 30-60 minutes, which is necessary for the calibration of the power controller, which will further affect the accuracy of the display of the charge level in the Android system.
Preparation for the first launch and charge check
Before you try to connect gadgets, you need to make sure that they are ready to work. Often users ignore the insulation films on the contacts, which leads to a lack of response to charging and inability to turn on. Carefully examine the inside of the charging case and the headphones themselves.
The new Redmi AirDots contacts often have tiny blue or transparent stickers that block the current. If they are not removed, the device will think that it is permanently in the case, and will not go into pairing mode. Carefully remove the protection if it is detected.
Once the films are removed, place the headphones in the case and connect it to the power source. The indicator on the front should light up red, signaling the charging process. When the battery is full, the indicator will go out or change color, depending on the specific modification of your model.
⚠️ Note: Do not use chargers with support for fast charging of high power (more 18-20 W) without a controller, as this may damage the small battery of the case. USB-port 1And.
It is also important to check the purity of the contacts, they should be free of dust, pile or oxides, wipe the contacts with a dry lilaless napkin or cotton swab soaked in isopropyl alcohol to ensure a reliable connection.
☑️ Connection readiness
The algorithm of primary pairing with Android and iOS
Connecting headphones to a smartphone requires a clear sequence of actions. Unlike wired headsets, the order of extraction of devices from the case is critical here, and breaking the algorithm will lead to desynchronization of the left and right channel.
First, you need to activate the search mode on the phone itself. Go to the Bluetooth settings and make sure that the module is on and visible to other devices. Now we move on to manipulating the headphones themselves.
Take both of the headphones out of the charger case at the same time. Don't wait for one to blink, take them out quickly, almost simultaneously. The lights should start flashing white, which means pairing mode.
- 📱 Unlock the smartphone screen and open the Bluetooth menu.
- 🔍 Wait for the device to appear on the list of available devices (usually Redmi AirDots or Mi True Wireless EBs Basic).
- 👆 Click on the device name to start pairing.
- ✅ Confirm the connection request if it appears on the screen.
When you successfully connect, the voice assistant will tell you if you're "Connected" or "Connected," and if you hear it in only one ear, the headphones are not synchronized, and you need to repeat the procedure by resetting the settings.
Synchronization of left and right headphone
One of the most common problems is when the phone sees two identical devices or the sound comes from only one channel. TWS-The synchronization between the ears is lost, and they need to be re-introduced.
To start, remove the device from the Bluetooth list on your phone (forget the device). Then place both earbuds in the case and wait for them to turn off. Then remove them at the same time and quickly press the touch zones on both headphones 5 times in a row.
The indicators should blink red a few times, and then the headphones will turn off. This is a signal that you completely reset the settings. Now put them back in the case, close the lid, wait 10 seconds and re-pair for repairing.
⚠️ Attention: When resetting, it is important to press the sensors of both headphones at the same time and at the same speed. If one presses 5 times and the other 4, the reset does not occur, and the problem of desynchronization persists.
There is an alternative method for some firmware versions: pinch the sensors on both headphones and hold for about 20 seconds until the red indicator appears. However, the five-press method is more versatile for the Redmi AirDots series.
What to do if the reset does not help?
Setting up touch control and voice assistant
By default, touch controls in Redmi AirDots are set to basic features, but they can be reconfigured or simply learned standard commands. Control is done by touching or tapping the touch zone on the headphone body.
A gentle but confident touch is enough, but dirty or wet hands can impair response, so keep your surface clean.
- 🎵 One touch: playback / pause (on any headphone).
- 📞 Double touch: Calling a voice assistant (Siri, Google Assistant) or answering a call.
- ⏭ Triple touch: Next track (usually only on the right earpiece).
- ⏮ Five touch: previous track (only on the right earpiece, on some firmware).
For deeper customization, such as changing track order or activating low latency game mode, standard Android settings are not enough.
💡
To activate the game mode and reduce the latency, quickly press 5 times on the right earpiece. You will hear voice confirmation "Gaming mode." Repeat the action to turn off.
Use the Mi True Wireless EBs Basic app
For Android smartphone owners, there is the official Mi True Wireless EBs Basic app, which allows you to unlock the full potential of the headset. Through it you can check the exact charge level of each headphone, update the firmware and change the purpose of the buttons.
The app is not always available in the Google Play Store for all regions, so it often has to be downloaded as a free download. APK-file from verified resources. After installation, run the program and follow the instructions on the screen to connect.
In the app interface, you'll see visualizations of the charge of the case and each earphone separately, and there's also a headphone search feature that makes them sound if you lose them at home.
| Function | Description | Availability |
|---|---|---|
| Firmware Update | Installation of a new version of the software to improve stability | Android |
| Tune buttons | Change of actions for double and triple clique | Android |
| Headphone search | Audible signal to search for a lost device | Android/IOS (limited) |
| Game mode | Reduced Sound Delay (Low Latency) | All platforms (via buttons) |
For iOS users, the functionality is limited to standard Bluetooth settings, since the app is not officially supported on the iPhone, but basic features such as track switching and calling the assistant work steadily.
💡
Regular firmware updates through the app eliminate bugs connections and improve the quality of the audio codec, so it is not recommended to ignore this step.
Troubleshooting and Frequently Asked Questions
Even when set up correctly, technical problems can occur, most often due to interference in the air, a discharged battery or software conflicts in the smartphone operating system.
If the sound is interrupted or becomes quiet, check if you have closed your Bluetooth antenna (usually on the top end of the headphone facing outwards).
In case the phone doesn't see the headphones at all, try restarting the smartphone. Sometimes the Bluetooth cache overflows, and a new search for devices becomes impossible without restarting the service.