Xiaomi Mi True Wireless Earbuds Basic 2 is often the first headphones TWS-Headsets for many users due to the affordable price and quality sound, but the process of their initial activation and pairing with various devices can raise questions for beginners, especially if previously used wired models or headsets of other brands. Proper settings at the stage of acquaintance with the gadget ensure stable connection and no problems with desynchronization of channels in the future.
Unlike more advanced models like Redmi Buds or Redmi AirDots, the second version of Basic does not support Xiaomi Earbuds’ proprietary application for deep customization of the equalizer.This means that the entire basic configuration, including entering into pairing mode or a full reset, is performed exclusively through physical touches of touch panels and Bluetooth system settings of your smartphone or tablet. Understanding the logic of the indicators and connection algorithms is key to comfortable operation.
This guide describes in detail all the steps from removing the device from the case to fine-tuning gesture control, we will discuss the features of working with Android and iOS operating systems, as the procedures may differ slightly, and pay attention to the diagnosis of common problems, such as a quiet sound or the failure of one of the headphones to work, which is often solved by simple re-synchronization.
Headphone preparation and charge check
The first step before any setup is to check the battery charge level in both the headphones and the charging case, and the status indication in this model is implemented through LEDs: when you remove the case, a white indicator lights up, indicating readiness for work or the connection process. If the indicators do not light up, you need to place the headset in the case and connect it to the power source through the Micro-USB port.
Note that new devices often come with a factory charge designed for testing only, so it is recommended to fully charge them before first use.The charging process takes about 1.5 hours, the completed indicator will be reported by the dead indicator on the case. Ignoring this stage can cause the headphones to quickly discharge during the setup process, interrupting the pairing procedure.
💡
Full charging before first use calibrates the power controller and extends the overall battery life of the Xiaomi Mi True Wireless Earbuds Basic 2.
It's important to make sure the contacts are clean. There are metal contacts on the inside of the case and on the ends of the headphones themselves to charge, and if they get moisture, dust or earwax, the device may not charge or detect that it's in the case, which will lead to permanent discharge and inability to enter pairing mode.
The process of pairing with Android and iOS
The basic mode of operation of Xiaomi Mi True Wireless Earbuds Basic 2 involves automatically pairing the left and right earphone immediately after extraction from the case. When you take both devices out, they first look for each other (the indicators flash quickly), and then go to the waiting mode of connection to the external device (slow blinking).
For Android users, the process is this: open your settings, go to Bluetooth and enable scanning. The list of available devices should appear as Mi True Wireless EBs Basic 2. Click on it to connect. Successful connection will be confirmed by voice message "Connected" and change the nature of the flashing indicator.
- 📱 iOS owners need to go to Settings → Bluetooth and find the device in the list of "Other devices".
- 🔊 On devices with MIUI A pop-up window may appear with animation showing the charge of each headphone separately.
- 🔄 If the device is not found, put the headphones in the case, close the lid and open it again to restart the detection mode.
A feature of the model is the absence of a pairing button on the case case body, unlike AirPods or some Samsung models. Entering pairing mode is only by removing the headphones or forced reset. If the smartphone does not see the headset, try turning off Bluetooth on other nearby devices that may have previously connected to these headphones, as they can intercept the signal.
Handling gestures and voice assistant
Since there is no customization application, the management of Xiaomi Mi True Wireless Earbuds Basic 2 is completely tied to the touch zones located on the outer flat part of the case. The standard gesture configuration is configured by the manufacturer to provide basic functionality, but the user must clearly know the sequence of clicks to control playback and calls.
☑️ Sensor testing
There is an important nuance to calling the voice assistant. By default, triple tapping any headphone activates Google Assistant or Siri (depending on the smartphone system). However, on some versions of the firmware, this feature may not be active or require pre-tuning in the Android system. To activate, you need to make sure that the Bluetooth settings of the selected device allow access to contacts and microphone.
⚠️ Attention: Touch zone is sensitive to moisture. If you've just been training or it's raining, touches may not be read or may cause false positives.
Long-term retention (about 2 seconds) during an incoming call allows you to reset the call, and during a conversation, to turn on the hold mode (mute), if supported by the phone's operating system. There is no standard way to change the purpose of gestures (for example, to switch tracks on the left earphone) without using third-party, informal applications, which are not guaranteed to work.
Resetting and reconnecting (Hard Reset)
The most common problem owners face is desynchronizing channels when only one earpiece is playing, or not being able to connect to a previously known device, which requires a full factory reset, which clears the internal memory of the headphones of all stored pairing profiles.
To perform the reset, you need to place both earphones in the charging case. Make sure they start charging (red lights lit up). Then, without removing them, press and hold the touch zones on both earphones simultaneously for 5-7 seconds. The indicators should flash red three times, after which the headphones will turn off and reset.
What to do if the reset does not work?
After a successful reset, the headphones will automatically go into pair-finding mode (fast flashing white), and now you need to re-pair the pairing procedure, as in the first purchase, and it is important to pair both headphones with the phone as a single device, rather than connecting them separately.
Table of indicators and their significance
Understanding color is key to diagnosing the status of Xiaomi Mi True Wireless Earbuds Basic 2. LEDs not only report charge, but also current mode, connection errors or charging process. Misinterpreting signals can lead to false conclusions about the malfunction of the device.
| Status of the indicator | Colour | Meaning |
|---|---|---|
| Slow blinking | White | Preparation mode (Pairing Mode) |
| Fast blinking (2 times per second) | White | Searching for a second headphone or phone |
| It's burning all the time. | Red. | Charging is in progress. |
| Gasnet | - | Charging is completed or the device is off |
| Triple flashing. | Red. | Resetting of settings was successfully completed |
It's worth noting that the brightness of the indicator can vary depending on the angle of view and lighting. In some cases, especially when the battery is low, the LED can flash red even outside the case, warning of the need for urgent charging, in which case the headphones can spontaneously turn off.
💡
If the indicators are lit in different colors or flash asynchronously after extraction from the case, this is a sign of desynchronization - an immediate reset is required.
Solving Sound and Microphone Problems
The sound quality in Xiaomi Mi True Wireless Earbuds Basic 2 is not only based on hardware, but also on the quality of the connection. The AAC codec used in these headphones provides good quality, but is sensitive to interference. If you hear crackling, stuttering or interruptions, check if the phone is in a pocket of thick cloth jeans or behind metal objects.
A frequent complaint is that there is a quiet sound or no sound in one of the channels. Before contacting the service, you need to check the sound balance in the settings of the smartphone. In Android, this is often hidden in the Special Opportunities section → Hearing, where the sliders of the left and right channels should be strictly in the center. Shifting the balance towards one channel is a common software error, not a break in the speaker.
- 🧹 Check the speaker grid for earwax – this is a common cause of quiet sound.
- 📶 Make sure there are no thick walls or working microwave ovens between the phone and headphones.
- 🎚️ Check if Absolute Volume is enabled in Android developer options if the sound is too quiet.
⚠️ Attention: Do not attempt to clean the speaker grid with sharp metal objects or cotton swabs by pushing them inwards.This can damage the speaker membrane.Use a soft dry brush.
If the microphone is not working well and the interlocutors complain of a quiet voice or echo, make sure that the microphone hole (located on the bottom end of the earphone leg) is not closed with your finger during a conversation, and it is also worth checking the settings for microphone access permission for specific applications such as Telegram or WhatsApp.