Modern wireless headphones have become an integral part of the lives of millions of users, and models from Xiaomi occupy a leading position in the market due to the optimal value for money. However, after buying a device, many face difficulties in the initial launch, as the synchronization process between the left and right modules does not always go smoothly the first time.
In this article, we will take a closer look at all the steps in Xiaomi Airdots’ preparation, including hidden features that are often overlooked by beginners. You will learn how to avoid common pairing errors, how to reset settings to factory settings, and what nuances to consider to extend battery life. A deep understanding of the logic of the device will help you avoid many sound problems in the future.
Before you go into action, it's important to make sure your headphones are fully charged, as low energy can lead to unstable connection or interruption of the setup process. Many users ignore this point, and then wonder why the device does not see the phone or discharge quickly. Take a few minutes of preparation, and subsequent use will only bring pleasure.
Primary preparation and activation of headphones
Starting with any of the TWS-Headphones always start with the removal of them from the charging case, but in the case of Xiaomi products, there is an important nuance. For the first activation, you need to remove protective films from the charging contacts on the headphones themselves, if they are present there. Often manufacturers leave dielectric stickers so that the battery does not discharge during storage in a warehouse, and without removing them, the device simply will not turn on.
Once removed from the case, the indicators should light up, signaling a switch to a standby pairing mode. If that doesn't happen, try inserting the headphones back into the case and pulling them out again, making sure they fit tightly into the contacts. Sometimes it takes a few seconds for the Airdots microcontroller to initialize the Bluetooth module.
- 🎧 Remove both headphones from the charging case at the same time.
- 🔋 Make sure the lights flash white, indicating pairing mode.
- 🧼 Check for protective films on contacts and remove them if necessary.
- ⏱️ Give me the device. 5-10 Seconds for internal self-diagnosis before connecting to your phone.
It's important to understand that the initial activation can take a little longer than the subsequent activations. The system needs to download the basic profiles and prepare for an external connection. Don't rush to search for the device in the phone right away, give the gadget time to start.
⚠️ Warning: If the indicators do not light up after being removed from the case, do not immediately try to disassemble the device. Put the headphones in the case and connect it to the charger on the case. 15-20 Maybe the battery is completely gone into deep discharge.
The process of pairing with a smartphone
The main stage of setting up is to search and connect the device through the Bluetooth menu of your smartphone. Unlike some competitors, Xiaomi Airdots does not require the installation of a proprietary application for basic work, although it expands the functionality.
Open Bluetooth settings on your phone and start searching for new devices. The list of available gadgets should appear the name Xiaomi Airdots or AirDots BASIC, depending on the specific modification of your model. By clicking on the name, you initiate the handshake process, after which the device will be stored in the memory of the phone.
It's worth noting that after the first successful connection, the synchronization will be automatic, so you don't have to go into the settings every time, you just have to remove the headphones from the case, and they will connect to the last device used, which provides a high level of user comfort in everyday life.
In rare cases, the phone may see two identical devices with similar names, which means that the headphones are not synchronized with each other and work in mono mode, in which case you need to remove both devices from the list of saved and perform the reset procedure described below.
Synchronization of left and right headphone
One of the most common problems faced by budget owners TWS-The left and right headphones have to work in pairs, transmitting stereo sound, but sometimes they start to behave as independent mono-device, this can happen after one of the modules is discharged or the Bluetooth protocol malfunctions.
To solve this problem, there is a special reconnection procedure that returns the devices to a single cluster: first, remove the Xiaomi Airdots device from the list of paired devices on the phone and turn off Bluetooth. Then put both earphones in the case, close it and wait 10 seconds.
☑️ Checklist of synchronization
Next comes the most important point: simultaneously press the touchpads on both headphones and hold them for about 20 seconds. The indicators should flash red several times, after which the reboot process begins. Once the indicators go out, remove the headphones from the case - they should automatically connect to each other, and only one of them (usually the right one) will flash, signaling readiness to connect to the phone.
| Status of the indicator | Meaning | Action. |
|---|---|---|
| White flashing | Search mode (Pairing Mode) | Search the Bluetooth menu of the phone |
| Red flashing | Low charge or discharge mode | Set to charge or complete the discharge |
| Burning red. | Charging is in progress. | Expect full charge |
| It's not burning. | Off or full charge | Remove from the case or connect the cable |
Successful synchronization is critical to the proper operation of the microphone and music control. If one of the headphones does not know the other exists, the functions of the pause or switching tracks may not work correctly or only on one side.
Touch panel management
Xiaomi Airdots's management interface is built on the touchpads on the outside of each headphone, which eliminates mechanical buttons, making the device more waterproof and aesthetic, but requires getting used to certain patterns of tapping. The developers have laid out several basic interaction scenarios.
Single tap is usually responsible for playing or pausing a track, as well as responding to an incoming call. Double tap is most often designed to call a voice assistant (Siri or Google Assistant) or re-dial the last number. Triple taps tend to switch tracks forward, although in some firmwares the logic may differ.
Secrets of Sensory Control
It is important to press the panel confidently, but without the excessive effort that can displace the earpiece in the ear.The sensor responds to a change in capacity, so even a light but clear touch is usually enough. If the control is not working properly, wipe the surface of the earpiece and fingers from moisture or fat.
- 🎵 One touch: Play/Pause/Respond to the call.
- 🗣️ Two touches: Voice assistant / Repeated dial.
- ⏭️ Three touches: Next track (in some versions).
- 📞 Retention (2 seconds): Calling off / Game mode.
Using the Mi Fit application and software updates
While basic configuration is possible without additional tools, to fully unlock the potential, it is recommended to use the Mi Fit app (or Xiaomi Wear in new versions), through which you can not only track battery power with high accuracy, but also configure the equalizer, update the firmware and change the purpose of touch buttons.
To connect, open the app, log in and tap "Add device." Select the headphone category and follow the instructions on the screen. If your device is supported, it will appear in the list of available ones. Once connected, you can see the exact percentage of charge for each headphone separately, which is impossible to do through the standard Bluetooth menu.
⚠️ Warning: When updating your firmware through the app, make sure the headphones are at least 50% charged and the phone is near them.
Software updates often fix connection stability bugs and improve noise cancellation when talking. Manufacturers regularly release patches that improve compatibility with new versions of Android and iOS, so ignore update notifications.
The app also has audio effects settings, if the model supports them, so you can choose the listening profile that best suits your music genre, whether it's bass rock or pure vocals, so you can personalize the sound to your own preferences.
Addressing common problems
Even when properly tuned, technical difficulties such as quiet sound, interruptions or lack of charge can occur. Often the cause is not a breakdown, but oxidized contacts or software failure. Regular cleaning of contacts with alcohol and dry cloth helps solve 90% of charging problems.
If the sound is quiet or lost in one channel, check the balance in the settings of special features of your phone. Sometimes the system automatically shifts the balance when connecting new devices, and it is worth trying to "forget" the device in Bluetooth and connect again.
💡
Wipe the headphones and case contacts with a dry cotton swab once a week.Sweat and dust create an oxide film that prevents normal charging and can cause the earphone to stop turning on.
When the headphones have stopped responding to any action, including resetting, it may be necessary to completely discharge the headphones. Leave the case open for a few days until the battery is fully drained, and then charge them to 100%.
Remember that Bluetooth is limited in range, and having thick walls or working microwave ovens can be a hindrance. Try to keep your phone in your pocket on the same side as the main receiving earphone (usually the right one) for better signal stability.
💡
Most Airdots problems are solved by a full reset and re-synchronization of the left and right modules, rather than requiring maintenance repairs.