Xiaomi’s popular wireless headphones, known as Redmi AirDots or Mi True Wireless Earbuds Basic, are often the first to be released. TWS-It's a user-friendly headset because it's accessible and sound-quality, but the process of activating it and then putting it on can be a question for beginners, because it doesn't have the physical buttons on the headphones themselves.
It is important to understand that the phrase “how to wear” in the context of this model implies not only physical placement in the ear, but also the correct extraction algorithm from the case to activate the Bluetooth module. Incorrect sequence of actions can lead to the fact that the gadget will not turn on or be visible to the smartphone, which will create a false impression of a malfunction of the electronics.
In this article, we will take a look at all the nuances of operation, from extracting from the charging case to setting up the touch control, and learn how to avoid the typical mistakes that 90% of users make when they first get acquainted with Xiaomi products.
Principle of operation and activation of headphones
The main feature of Redmi AirDots is that it doesn't have mechanical power buttons, and the whole logic of the work is all about the charging contacts inside the case, and when you take the headphones out, they automatically turn on, and if you just pull out one headphone, it'll turn on, but it won't go into pairing mode until you pull out the second one or reset it.
To work properly, you need to make sure that the headphones and the charging case themselves have sufficient charge. Indicators on the case may not light up when the battery level is low, which is often confusing. Light indication is the main way the device communicates with the user, signaling the connection status and charge level.
⚠️ Warning: If the lights don't burn after being removed from the case, don't rush to throw the device away. Put the headphones back in the case and leave them to charge at least on the back of the case. 30-60 Deep discharge of lithium polymer batteries is a common occurrence in long-term storage.
The activation process begins when the charging contacts are opened, which is why it's important to remove the headset quickly and confidently, so if you hold the headphone with your fingers by the contacts while you're extracting it, it can "think" it's still in the case and not turn on.
💡
Before first use, wipe the golden contacts on headphones and inside the case with a dry lilac-free wipe. Factory lubrication or oxidation can prevent charging and correctly switching on.
Step-by-step instructions for the first connection
The first pairing is the most important step in the future, and the algorithm must be strictly followed to ensure that the headphones sync with each other (TWS mode) and then with the phone. If you skip the synchronization step between the ears, the phone can only see one speaker or both devices separately.
Follow the following steps for guaranteed results:
- 📱 Remove both earphones from the charging case at the same time.
- ⚡ Wait for the indicators to light up in red (this means switching on).
- 🔄 Wait a few seconds until the indicators start flashing white (couple search mode).
- 📶 Open Bluetooth settings on your smartphone and find the Redmi AirDots device.
- ✅ Click on the name to pair.
Once the connection is successful, the voice assistant will notify you of the status: "Connected" or "Channel Right" / "Channel Left." If you hear only one phrase or it repeats, then the stereo is not ready, in which case, put both earphones in the case, close the lid, wait 5 seconds and repeat the extraction procedure.
☑️ Checking before connection
Proper landing and ergonomics
The physical comfort of wearing Xiaomi AirDots directly affects the sound quality, especially the reproduction of low frequencies. The design is intrachannel, so tightness is a key factor. If the headphone is not tight, the bass will “blow out”, and the noise reduction (passive) will not work.
The kit usually comes with three pairs of silicone earpieces of different sizes (S, M, L). Don't ignore the possibility of replacing the nozzles. The size of the ear canal should match the diameter of your ear canal. Too small will fall out, and too large will cause discomfort and pressure.
To fit properly, take the earpiece by the leg, insert it into the ear canal, and squirt it around its axis slightly to make it sit in the anatomical shape of the ear. A properly installed AirDot should not stagger when opening your mouth or moving your jaw.
Setting up sensor control
The headset is controlled by touch panels located on the outside of each earpiece, pressing clearly, but not too strongly to keep the device from pushing deeper into the ear, and responding to single, double and triple clicks, as well as prolonged retention.
The standard configuration of actions is as follows:
- 🎵 Single touch: playback/pause of track or answering a call.
- ⏭ Double touch (right earphone): next track.
- ⏮ Double touch (left earphone): previous track (depending on firmware version).
- 📞 Retention (2 seconds): Calling or activation of voice assistant.
Importantly, left-hand and right-hand channels can vary depending on the firmware version. Some Redmi AirDots 2 or Pro versions offer customization via Mi True Wireless Earbuds Basic, where you can reassign actions.
The secret of triple touching
Solution: One earphone is not working
The most common situation is when only one headphone is working or they can't see each other, which is not a marriage, but a de-synchronization of the stereo pair, and the headphones have forgotten each other and are trying to connect to the phone as two separate mono devices.
To correct, you must perform a full reset (Hard Reset):
- Remove the Redmi AirDots device from the Bluetooth list on your phone (“Forget the device”).
- Turn off Bluetooth on your smartphone.
- Put both headphones in the case, then remove them.
- Quickly press 5 times on the touchpad of each headphone at the same time (or 2 times, depending on the version), until the indicators flash red 3 times.
- After reset, search and pair again.
⚠️ Warning: When performing a reset, make sure the headphones are not connected to the phone in the background.If the phone "sees" them during the procedure, the reset may not pass.
If the problem persists, check the charge of each earphone individually. Sometimes one of them discharges faster due to a production defect of the battery, and the case does not have time to charge it during short cycles of use.
Table of indicators and their significance
Understanding color indications helps quickly diagnose the condition of a device without connecting to a smartphone screen. Different colors and blinking modes carry specific information about the processes inside Xiaomi AirDots.
| Color of indicator | Mode of work | Meaning |
|---|---|---|
| Red (constantly) | Charging. | The headphone is charging in the case. |
| White (constantly) | Work. | Headphone connected to phone |
| White (blinks) | Pairing. | Device search mode (Pairing) |
| Red (flashing) | Mistake/Discharge | Critically low charge or failure |
| Red (3 times) | Reset | Successful reset to factory settings |
Note that in some Mi True Wireless Earbuds Basic S revisions, the display may be simplified, for example, the absence of an indicator on one of the headphones may mean that it acts as a slave device after the connection.
Contact and service
The durability of Xiaomi AirDots is largely dependent on the purity of the contact group.Earwax, sweat and dust accumulate on the speaker grid and charging contacts, worsening sound and preventing charging.Regular cleaning is a mandatory procedure for owners. TWS-headset.
Use a cotton swab lightly soaked in alcohol (isopropyl) to wipe the contacts. Do not use water or aggressive chemicals that can damage the plastic case or adhesives.
💡
Regular cleanness of the speaker grid and charging contacts extends the life of headphones by 30-40% and preserves the sound quality.
It is also recommended to completely discharge the headphones once a month before turning them off and then charge them to 100%, which helps calibrate the battery controller and avoid the “memory” effect, although it is less typical for Li-Pol batteries than for older types of batteries.