How to add volume in Xiaomi headphones: from basic settings to advanced hacks

Have you bought a new Xiaomi headphone, but the sound seems too quiet even at the maximum? Or over time the volume has become "slowed down" and now you have to listen to music? The problem is familiar to many owners of Redmi AirDots, Mi Earbuds Basic or wired Mi In-Ear. The reasons may lie both in the software limitations of the smartphone and in the hardware features of the headphones themselves.

In this article, we will discuss 7 Important: not all methods are equally safe, for example, changing the parameters of the parameters of the sound uniformity to modify the system files (for experienced users). mixer_paths.xml This can cause sound distortion or even damage to the speakers, so we will highlight the risky steps and suggest alternatives.

To start with, it's obvious that your headphones may just not be up to high volume because of manufacturer constraints. For example, in Xiaomi Mi True Wireless Earbuds Basic 2, the maximum sound level is artificially understated to protect your hearing, but that doesn't mean you can't fix it.

1. Check the basic sound settings on the Xiaomi smartphone

Before digging deeper, make sure the problem isn't with the phone's settings. Often users miss the obvious settings that affect volume.

Open the Settings → Sound and vibration and check:

• 🔊 Media volume: the slider should be at its maximum. Some models (for example, the Redmi Note 10 Pro) have a separate controller for Bluetooth headphones.
• 🎧 Amplify the sound in headphones: turn on the option if it is available (available on the phone). MIUI 12+).
• 🔄 Volume normalization: Turn it off – it automatically lowers the volume of “loud” tracks.
• 🎛️ EQUALIZER: Try preset Bass or Rock – they often increase the overall volume by amplifying the low frequencies.

If you use Xiaomi EU ROM or custom firmware, there may be no items, in which case move on to the next section.

💡

On some models (e.g. POCO F3), in the Settings menu → Additional → Developer Mode, there is an option to turn off absolute volume. Turning it on can increase the maximum sound level in Bluetooth headphones.

2. Headphone and connector cleaning: the physical causes of quiet sound

Dust, moisture, or contact oxidation are common causes of lower volume, especially in Xiaomi wired headphones. For example, in the Mi Hybrid Pro HD, speakers are located close to the grid, and over time it clogs.

How to clean your headphones:

• 🧹 Cotton swab + alcohol: wipe the speaker grid gently (don't press hard!) TWS-Headphones (e.g. Redmi Buds 3 Pro) use a dry brush.
• 🔌 3.5mm connector: If the sound is quiet only in wired headphones, check the jack on the phone. Plug in/remove the plug several times - sometimes the contacts oxidize.
• 💧 Moisture: If your headphones are wet, dry them for at least 24 hours in rice or silica gel!

For Bluetooth headphones, also check:

• 🔋 Battery charge: at levels below 20%, volume can automatically decrease.
• 📶 Telephone Distance: If the signal is weak, the sound becomes quieter and jammed.

3.Use of third-party applications to amplify sound

If system settings don't work, try specialized utilities. They work in different ways: some modify the sound stream at the OS level, others simply amplify the signal with algorithms.

Top.-3 volume-boosting:

For ViPER4Android, you will need:

1. Install the application and driver from XDA Developers.
2. Enable sound processing in Settings → Driver → Install the driver.
3. In the Master Limiter section, increase Max Amplification to 6-8 dB.

Important: After installing any booster, check the sound at medium volume. If wheezing or squeaking occurs, reduce the gain.

Modification of system files (for advanced users)

If you’re willing to take the risk, you can manually change the volume limits in system files, a method that works on most Xiaomi smartphones with MIUI, but requires root rights or access to ADB.

Step. 1: Find the file. mixer_paths.xml

He's on his way:

/vendor/etc/mixer_paths.xml

Or for some models:

/system/vendor/etc/mixer_paths_tasha.xml

Step 2: Change the volume settings

Find the lines with:

<path name="headphone">


<ctl name="HPHL Volume" value="60" />




<ctl name="HPHR Volume" value="60" />

Increase your value to 80-90 (maximum 100, but it's dangerous!). For Bluetooth, look for:

<path name="bluetooth-a2dp">


<ctl name="AIF1_DAC1L Mixer AIF1_DAC1 Switch" value="1" />

Step 3: Save and restart your phone

💡

Change of change mixer_paths.xml This can cause damage to speakers or loss of warranty. Start with minimum values (e.g., minimum values, 70) and test the sound gradually.

⚠️ Note: On smartphones with a MediaTek processor (e.g. Redmi) 9A) The path to the file may be different: /vendor/etc/audio_platform_info.xml. Incorrect editing will result in complete loss of sound!

5. Update of the firmware of headphones and smartphone

The manufacturer can limit the volume in older versions of the software. For example, in Redmi AirDots 2, after upgrading to V1.7.1.0 firmware, the option “Rightened bass” appeared, which indirectly increases the overall volume.

How to update your headphones:

1. Put the headphones on the phone.
2. Open the Mi Home or Xiaomi Wear app.
3. Go to Devices → [Your Model] → Software Update.
4. If the update is not available, check it manually on MIUI Downloads.

For the smartphone:

• 📱 Go to Settings. → The phone. → Updating the system.
• 🔄 If there are no updates, try changing the region to Settings. → Additionally. → Region to India (there are often updates earlier).

Note: After the update, reset your headphone settings (press the button for 10 seconds before the red light flashes).

6.Alternative methods: from hardware amplifiers to replacement of headphones

If the software methods did not help, consider the “iron” solutions.

Option 1: External sound amplifier (DAC)

For wired headphones, a USB-C DAC (for example, Xiaomi Type-C to 3.5mm Audio Adapter) will work. It bypasses the built-in smartphone amplifier and can give +20-30% volume. Price: from 500 rubles.

Option 2: Replacement of the speaker membrane

In Xiaomi Mi In-Ear Pro HD headphones, the membrane stretches over time, which reduces the volume. It costs 300-800 rubles to replace it at the service center. Don't try to do it yourself - the risk of damaging the speaker.

Option 3: Buying high-sensitivity headphones

If your model is initially quiet (like Mi Earbuds Basic with 93 dB sensitivity), consider alternatives:

• 🎵 Xiaomi FlipBuds Pro (103 dB sensitivity) – 30% louder.
• 🎧 Redmi Buds 4 Active (98 dB) - budget version with good volume.

💡

Before buying new headphones, check their impedance (resistance). For Xiaomi smartphones, the optimal 16-32 Ohms headphones with impedance 64 Ohms and above will be quiet without an amplifier.

7. fault diagnosis: when it's time to go to service

If none of the methods worked, the problem could be hardware, and here are signs that the headphones or smartphone need repair:

Symptoms of malfunctioning headphones:

• 🔇 Sound disappears in one ear (check balance in settings!).
• 🔊 Volume spontaneously changes when the cable moves (wire break).
• 🎛️ There is background noise or cracking (damaged speaker).

Symptoms of problems with a smartphone:

• 📵 Silent sound in all headphones, but normal in the phone's dynamics (faulty audio chip).
• 🔌 Wired headphones work, but Bluetooth doesn’t (a problem with the Bluetooth module).

Cost of repair:

⚠️ Note: If your Xiaomi is guaranteed, do not open the headphones yourself - this will void the warranty.

FAQ: Frequent questions about volume in Xiaomi headphones