The volume of the speaker on Xiaomi Redmi Note 7: how to increase without loss of quality?

The Xiaomi Redmi Note 7 is still one of the most popular budget smartphones due to its balanced performance and reliability. However, many users face the quiet sound of a conversational speaker - a problem especially relevant in noisy conditions or when using hands-free communication. Unlike multimedia speakers, the conversational speaker (earpiece) is limited by the hardware and software limitations of the manufacturer.

In this article, we will discuss 7 working ways to increase the volume of the speaker on the Redmi Note 7, from basic MIUI settings to deep system modifications. It is important to understand that some methods require root rights or changes to system files, which can affect the warranty and stability of the device, we will indicate the risks and alternatives for each option.

If you're not ready to experiment with firmware, start with the first three, which are safe and require no special knowledge. For advanced users, we'll give you instructions on how to work with engineer mode, build.prop, and third-party Magisk modules.

1. Check basic sound settings in MIUI

Before you start to make complex manipulations, make sure that the problem is not in the standard settings.There are several hidden parameters on the Redmi Note 7 that can affect the volume of the speaker.

Open Settings → Sound and vibration and do the following:

• 🔊 Make sure the Call and Notifications Slider is at its maximum – it indirectly affects the speaker’s limitations.
• 📞 In the Call Volume section, check whether the Quiet Mode or No Sound mode is activated for specific contacts.
• 🔄 Reboot your smartphone – sometimes temporary disruptions in the work of audio drivers lead to a decrease in volume.
• 🛠️ Enable the "Amprovement of Sound" option (if available in your version) MIUI) — adds +2-3 dB to the total volume level.

Pay special attention to the availability settings: go to Settings → Special features → Hearing. Here you can activate Monosound or Left/Right Channel Balance, which artificially reduces the volume of one of the speakers.

2. Cleaning dynamics from dust and debris

One of the most common reasons for the volume down is the speaker pollution. On the Redmi Note 7, the speaker is located at the top of the screen and over time gets clogged with dust, villi or potassium fat deposits, which physically blocks the membrane, reducing the amplitude of the sound vibrations.

How to clean the speaker without breaking the phone:

• 🧹 Use a soft toothbrush (new!) with a short pile, and carefully run it along the grille to keep the speaker from damaging the membrane.
• 💨 Use a compressed air canister (to clean keyboards) Hold it vertically at a distance of 3-5 cm and blow out the dust with short presses.
• 🧲 To remove magnetic particles (if the phone is often in a bag with keys), use sticky tape - gently press it against the grille and tear it off.

⚠️ Attention: Do not use sharp objects (denture cleaners, needles), alcohol or wet wipes - this can damage the waterproof membrane speaker. If the pollution is severe, it is better to contact a service center for professional cleaning.

💡

Before cleaning the speaker, turn off the phone and remove it. SIM-This will prevent dust from entering the slot.

3. Volume setting via engineering menu (no root)

The Xiaomi Redmi Note 7 has a hidden engineering menu (Engineer Mode) where you can manually increase the volume of the speaker. This method does not require root rights, but changes the system parameters, so act carefully.

Instructions for setting:

1. Open the Phone app and enter the combination: ##36446337###
2. Select Hardware Testing → Audio → Normal Mode.
3. In the Receiver section, set the Level to a maximum (usually 160 or 255, depending on the MIUI version).
4. Press Set, then restart the phone.

If #36446337## doesn't work, try the alternative codes:

• ##4636## → Hardware info → Audio
• #6484## (for some versions of MIUI 10-12)

⚠️ Warning: Setting values above 160 can cause sound distortion or overload of the speaker. If there is a wheezing or crackling after the changes, return the parameters to the factory (Level 0 or Default).

4. Modification of the build.prop file (root required)

For users with unlocked bootloader and root rights, there is a way to increase volume by editing the system file build.prop. This method changes the limitations of Android audio policy, but if edited incorrectly, can lead to bootloop (cyclical reboot).

Step-by-step:

1. Install a file manager with root support (such as Root Explorer or Solid Explorer).
2. Go to /system/build.prop and back up the file.
3. Open the file in the text editor and add the following lines at the end: ro.audio.speaker.deep_buffer=true persist.audio.fluence.speaker=true persist.audio.fluence.voicecall=true persist.speaker.protection=false
4. Save the changes, set the rights to 644 (rw-r--r---) and restart the phone.

These settings disable some of the protective volume limits, but can shorten the life of the speaker with prolonged use at maximum. After applying, check the sound - if there are distortions, delete the added lines.

5. Installation of Magisk modules for sound amplification

If you have Magisk installed, you can use specialized modules that modify audio drivers at the core level.

• 🔊 ViPER4Android FX — powerful equalizer with support for sound amplification. After installing the module through Magisk, activate in the "Master Limiter" settings and increase "Pre-Amp" to +3-6 dB.
• 📱 Audio Modification Library – Optimizes audio policy for specific Xiaomi models. SDM660" (processor code Redmi Note 7).
• 🎛️ JamesDSP is an alternative to ViPER with a simpler interface. Turn on Dynamic System and install Gain on the computer. +10–15%.

⚠️ Note: Before installing modules, make a backup copy through TWRP. Some modules are in conflict with MIUI 12+ They can cause problems with Bluetooth or the microphone!

For installation:

1. Download the module in.zip format from the official Magisk repository.
2. Open Magisk Manager, go to Modules → Install from storage.
3. Select the downloaded file and wait for the installation to be completed.
4. Reboot the phone.

Make a backup through TWRP

Check the compatibility of the module with MIUI 11/12/13

Disable other audio modules (if installed)

Charge your phone at least 50%

Ensure that root rights are available-->

6. Alternative methods: headphones, Bluetooth and external speakers

If software methods have failed, consider hardware alternatives:

• 🎧 Use headphones with a microphone – even budget models (like Xiaomi Basic) will provide better audibility than the built-in speaker.
• 🔊 Bluetooth headset (e.g. Redmi AirDots) – connects in 2 seconds and solves the problem of quiet sound in noisy places.
• 📱 Speak-of-mouth mode -- turn it on while you're talking with a button on the call screen. The sound will go through the main speaker, which is more powerful than the conversational speaker.
• 🔋 Outside USB-C speaker – connects via an adapter (e.g. Xiaomi Type-C to) 3.5mm) and provides volume 2-3 times higher.

For owners of Redmi Note 7 with a 3.5 mm connector, any wired headset speaker will suit. If the connector is damaged, use a USB-C hub with headphone access - it bypasses the limitations of the built-in audio chip.

💡

Speaking through the main speaker is the fastest way to improve audibility, but reduces the privacy of the conversation.

7 Hardware modifications: replacement of speaker or amplifier

If all software methods have been tried and the sound remains quiet, the problem may lie in the hardware:

• 🔧 Wear speaker – the membrane loses elasticity over time, especially with frequent conversations at maximum volume.
• 🔌 Problems with audio chip (Qualcomm) WCD9340 Redmi Note 7 - may require re-sweetening or replacement.
• 📶 Bad plume contact – oxidation or mechanical damage to the speaker-motherboard connection.

The cost of replacing the speaker on the Redmi Note 7 in service centers is 800-1500 rubles (depending on the region).If you decide to do it yourself, buy an original spare part with the MDY-007 article (for the version with the Snapdragon 660 processor).

⚠️ Note: When replacing the speaker, use a soldering station with a temperature not higher than 300°C: overheating can damage the board. If you're not sure about your skills, trust the repairs to the professionals.

FAQ: Frequent questions about the volume of the speaker