Modern wireless headphones have become an integral part of everyday life, and Xiaomi models deserve to take a leading position due to the optimal value for money. Xiaomi Earphones 2 Basic is no exception, offering users a stable connection and clean sound in a compact case. However, the first experience of using can raise questions, especially for those who have not previously encountered the ecosystem of the Chinese manufacturer.
The process of pairing (pairing) gadgets usually takes only a few minutes, but requires strict adherence to the sequence of actions to avoid synchronization errors. In this article, we will discuss in detail all the stages of settings, from extracting from the case to finely adjusting parameters through a proprietary application. You will learn how to properly activate the search mode so that the smartphone is guaranteed to detect the headset.
We will focus on the specifics of working with different operating systems, since the Bluetooth connection algorithms can differ slightly on Android and iOS. The correct initial configuration will ensure stable microphone operation, correct display of battery level and responsive touch control. Let's start to consider the connection procedure in detail.
Preparation of headphones for the first turn on
Before trying to find a device on the list of available networks, you need to make sure that the headset itself is ready to work. Often users are faced with a situation where the phone does not see the headphones because they are discharged or in deep sleep mode. Remove both earphones from the charging case and check the indicators.
If the indicators don't light up, place the headphones back in the case and connect it to the power source via a USB Type-C cable. For the first use, it is recommended to charge the device for at least 30 minutes. After charging, remove them again - the LEDs should start flashing, signaling readiness for pairing.
It is important to know that when you first remove from the case, the Xiaomi Earphones 2 Basic headphones automatically go into pair search mode. If this does not happen, you may need manual activation. Hold the touch zones on both headphones simultaneously for 5-7 seconds until the indicators flash a fast rhythm.
⚠️ Warning: Do not remove protective films from the charging contacts on the headphones themselves before first turning on, if present.This is a common error that blocks the charging and operation of the device.
Make sure that the Bluetooth on your smartphone is activated and visible to other devices. Move the phone closer to the case to rule out problems with signal range at the initial stage.
The process of connecting to Android smartphones
Owners of Android devices have the advantage of enhanced integration with Xiaomi products. the connection process is standard and does not require the installation of additional software for basic work, although the application significantly expands the functionality.
Open your smartphone settings and go to the Bluetooth section. Click on the search button for new devices or Add a new device. The list of available gadgets should appear the name Xiaomi Earphones 2 Basic.
Click on the headset name. The system can request a pairing confirmation — click "Plug in" or "OK." Once synchronized successfully, you'll hear a voice notification in the headphones and a characteristic beep.
- 📱 Open the settings menu and select Bluetooth.
- 🔍 Wait for the device to appear in the list of available.
- ✅ Click on the name to start pairing.
- 🎧 Confirm the action on the smartphone screen.
Some MIUI and HyperOS shells can offer quick setup through a pop-up immediately after opening a case next to a smartphone, analogous to Fast Pair technology, which speeds up the process.
💡
For full functionality on Android, it is recommended to install the Xiaomi Earbuds or Mi Fitness app available on Google Play.
Connection with iPhone and iOS devices
Users of the Apple ecosystem can also have no problem using Xiaomi's wireless headphones, although some features may be limited compared to Android.The audio transfer protocol is the universal standard.
On your iPhone, go to Settings → Bluetooth and make sure the switch is activated. Pull the headphones out of the case so they go into pairing mode. In the list of “Other devices” on the iPhone screen, the Xiaomi Earphones 2 Basic will appear.
Tap the device name. Once connected, the iPhone will remember the headset and automatically connect to it when you open the case in the future. Note that some settings may require a third-party app from the App Store to manage.
⚠️ Note: On iOS, it is impossible to update the firmware of headphones or change the settings of the equalizer without using specialized applications of third-party developers, since the official Xiaomi application for iOS may not support this model.
The audio quality of connecting to an iPhone remains high thanks to support for the AAC codec. However, the audio latency in games can be slightly higher than when using native AirPods.
Configure management through the application
To unlock the full potential of the headset, you need to use proprietary software. The application allows you to reassign touch commands, update firmware and customize the sound profile.
Download the Xiaomi Earbuds or Mi Fitness app from the official store. Once installed, open the program and add a new device, following the instructions on the screen. The app automatically determines the model and offers available updates.
☑️ Setup through the application
In the control menu, you can set up actions for double, triple touch and long pressing, and search for headphones if you lose them nearby is also available.
| Function | Description | Availability |
|---|---|---|
| equalizer | Frequency adjustment | Only in the annex |
| Headphone search | Sound signal | In the annex and case-case |
| Update of the PO | Installation of the new version | Only in the annex |
| Game mode | Reducing delay | Automatically. |
Regular firmware updates through the application can fix connection bugs and improve noise reduction, if it is provided by the model.
Decoding of light indicators
The LED lights on the case and the headphones themselves are the main way the device communicates with the user, and understanding the color indication will help quickly diagnose battery status or connection errors.
The indicator on the case shows the charging status of the case itself, and the LEDs on the legs of the headphones are their own charge and connection status. Colors can vary depending on the use case.
- 🔵 Blue (Blinking): Couple search mode, connectivity readiness.
- 🟢 Green (burning): Headphones are fully charged.
- 🔴 Red (burning): Low charge level, charging required.
- 🟠 Orange (flashing): pairing error or low case charge.
What if the indicator is always on red?
If the indicators are acting strangely, like flashing different colors randomly, try resetting to factory settings. This is often solved by software glitches.
Solution and resetting of settings
During operation, there may be situations when one earphone stops working, the sound is interrupted or the phone stops seeing the device.
To perform the reset, place both earbuds in the case and leave the lid open.Push and hold the touch zones on both headphones simultaneously for 10-15 seconds until the indicators flash red three times.
After that, the headphones will return to factory state, and you will need to re-do the pairing procedure by deleting the old device record in the phone's Bluetooth menu.
⚠️ Warning: When you reset, all custom configurations will be removed. You will have to reconfigure the control gestures and connect the device to the phone.
If connection problems persist after reset, check if the device is occupied by another gadget. Xiaomi Earphones 2 Basic can automatically connect to the last used device.
💡
If the sound is quiet or intermittent, check the speaker mesh for earwax and clean it carefully with a soft brush, without using sharp objects.