Xiaomi's modern wireless headsets have been a hit thanks to the combination of affordable prices and decent sound quality. However, despite the simplicity of the design, many users have difficulty getting to know the device for the first time. Often the problem lies not in the malfunction of the gadget, but in the lack of understanding the logic of the pairing mode, which is why it is important to follow the algorithm of actions clearly to avoid unnecessary waste of time and nerves.
The process of activating a Bluetooth connection can vary depending on your smartphone model and operating system version. Some devices require manual search, others instantly detect the accessory. In this article, we will discuss all the nuances that will help you quickly start using your favorite music, and we will also touch on the questions that arise when connecting to different platforms.
Before you start setting up, make sure your AirDots are charged. A discharged battery often causes the indicators to fail to light up or flash correctly. It's a basic condition, ignoring which negates any further attempts at synchronization. If you've just unpacked the box, let the device stand at room temperature a little while if it's in the cold.
So to get started, you'll need to make sure that there are a few key things that you need to do: first, check for a protective film on the charging contacts inside the case, which is often forgotten to remove. Second, make sure that the wireless module is on the phone, and only after you've met these conditions, you can start to actively pair the devices.
Primary activation and pairing mode
The most important step is to put the headset in visibility mode. Unlike wired headphones, wireless headphones require a special procedure to detect. Usually, when they are first turned on, they automatically go into search mode, as evidenced by the flashing of indicators. However, if the device has been used before, this process may require manual intervention.
To activate pairing mode, you need to remove both earbuds from the charging case. Notice the indicators: they should light up red to signal the switch on. Within seconds, one of them (usually the right one) will flash white, while the other will flash less or no flash, which means they are connected to each other and ready to connect to the smartphone.
If you don't start automatically, you'll need to force activation, you'll need to press the touch or mechanical buttons on both headphones simultaneously and hold them for about 5-7 seconds, you'll hear a voice message, or you'll see the color change of the indicator, which will signal that you're ready to connect. Don't release the buttons too early, otherwise the process will reset.
What do the color of the indicators mean?
It's important to understand the difference between connecting headphones to each other and connecting to a phone. They find each other first, create a single audio system, and then act as one device for the outside world. If you see two identical names on the Bluetooth list, then the synchronization between the left and right channels has not occurred.
Connection to Android-based smartphones
Android has many shells from different manufacturers, but the basic algorithm of actions remains the same for all versions. Once you have put the headset in visibility mode, take the phone in your hands. You need to open the system settings and find the partition responsible for wireless connections.
In most modern interfaces, the path is as follows: go to Settings → Connections → Bluetooth. Make sure the switch is in the active position. The phone will start scanning the surrounding space. The name of your model should appear on the list of available devices, for example, Mi True Wireless EBs Basic or AirDots.
☑️ Android Connection Algorithm
Click on the device name in the list. The system can request confirmation (pairing) or pin code input. Standard code is usually 0000 or 1234, but most often the process is without user input. Once you successfully connect, you will hear a characteristic beep, and the phone's status bar will display an icon of the headphone battery.
⚠️ Warning: If your phone says "I couldn't hide," don't panic. Often, the problem is solved by simply turning off and re-energizing the Bluetooth module on your smartphone. It's also worth checking if your AirDots are connected to another device nearby that can intercept the signal.
Once the connection is installed, track and volume control is done through touch zones on the housings, and you can find settings for these actions in the Mi Wear app or Xiaomi Earbuds if your model supports advanced control, which allows you to reassign button functions to your habits.
Setup of connection with iPhone (iOS)
Apple owners are lucky to have a high degree of compatibility, because the audio protocols are universal, but the iOS interface has its own features that are worth considering. The process begins similarly: remove the headphones from the case and wait for the indicator to flash quickly.
Open your iPhone settings and go to Bluetooth. Make sure the slider is activated. In the "Other Devices" section, your headset should appear in seconds. Click on it to initiate the connection. The system will alert you that it is a third-party accessory.
Confirm the action by clicking "Plug" or "Plug" and then your gadget will appear in the "My devices" list with a battery level. Connectivity stability on iOS is usually higher than on Android, thanks to optimization of data protocols, you can immediately run music or video to check the sound quality.
Note that the iPhone does not have a proprietary app from Xiaomi for detailed equalizer settings if the model does not support standard AAC profiles to the fullest. However, the basic functions of playback and call management work correctly. Third-party apps from the App Store can be used to fine-tune the sound.
Problem Solving: Headphones Cannot See Each Other
One of the most common problems is that the phone sees only one headphone or it doesn't detect it at all, which means that the synchronization between the left and right channels is disrupted, and then you have to do a full factory reset, which will bring the device back to the state it was in right after you bought it.
To do the reset, place both earbuds in the charge case and close the lid. Then remove them and press the touch zones (or buttons) at the same time. Hold them for about 20 seconds. The indicators should flash red several times before they go out. This is a signal that the device memory is cleared.
💡
If the reset doesn't work the first time, try putting the headphones in the case, closing the lid and leaving them for 10-15 minutes. Sometimes the power controller takes time to fully restart.
Once reset, you'll have to re-remove the old device from the Bluetooth list on your phone. Find your AirDots on the saved device list, click on the gear icon or "i" and select "Forget this device." Only then repeat the initial connection again.
Often, the left and right earphones are different in charge, and if one of them is zero and the other one is still charged, they may not work in pairs, so put them in a case and let them charge for at least 30 minutes before trying to sync them again.
Comparison of models and technical specifications
Xiaomi’s wireless headphone lineup is constantly being updated with new models, and it’s important to understand the differences between them. Major generations such as AirDots 1, AirDots 2 (Youth Edition) and Redmi AirDots 3 share similar operating principles, but differ in battery life and Bluetooth versions.
Newer models support Bluetooth 5.0 and higher, which provides more stable connectivity and lower power consumption. Older versions can have a shorter range and lose signal more often when obstacles are present. IPX4, allow them to be used during training.
| Model | Bluetooth version | Working hours (h) | Waterproofing |
|---|---|---|---|
| AirDots 1 | 5.0 | 4 | No. |
| AirDots 2 | 5.0 | 4 | IPX4 |
| AirDots 3 | 5.2 | 5 | IPX4 |
| AirDots Pro | 5.2 | 6 | IPX4 |
When choosing accessories or covers, you should also pay attention to the dimensions of the case. Despite the appearance of the similarity, the shape of the charging case can vary by several millimeters from generation to generation, which will make the wrong case useless. Always check compatibility by the exact name of the model.
💡
Compatibility of accessories and covers depends on the exact model of the case, as the dimensions may differ even within the same line.
Device care and extension of service life
So, in order for your wireless headphones to last a long time and be pleasing with quality sound, they need to be properly cared for. TWS-This is a pattern of contaminating the speaker's mesh with earwax and dust, which causes a quiet sound in one of the channels or a complete disappearance of the sound.
Regularly wipe the body with a soft dry cloth. To clean the speaker mesh, you can use a soft toothbrush or a cotton swab slightly soaked in alcohol. The main thing is not to wet the speaker itself or pour liquid into the body. Carefully remove contamination without pressing too hard on the membrane.
⚠️ Warning: Never use sharp objects (needles, toothpicks) to clean the speaker mesh.You can easily damage the thin membrane and the earphone will stop working or start wheezing.
It is also important to monitor the status of the charging contacts, if they become oxidized or plaque, the headphones may stop charging in the case, periodically wipe the contacts on the headphones themselves and inside the case with a dry cotton swab, which will ensure stable contact and proper indication of charge.
Keeping the device in a closed case, away from direct sunlight and heat sources. The lithium polymer batteries used in AirDots are sensitive to overheating. If you don't plan on using the headphones for a long time, leave them charged by about 50-60%.