Modern wireless headphones have become an integral part of everyday life, and Xiaomi Redmi AirDots is deservedly a leader in the budget segment. Many users face difficulties in the first launch, as the process of pairing these devices has its own unique features that distinguish them from the usual Bluetooth headsets. The correct initial setup ensures stable connection and no dissynchronization of sound between the right and left ears in the future.
Unlike many of its peers, these headphones require a rigorous procedure to create a stereo pair before connecting to a smartphone. If you ignore this step, the device can only work in mono mode or permanently lose communication. In this article, we will discuss in detail all the nuances of operation, from unpacking to advanced control settings.
Understanding the workings of indicators and touch panels will help you to realize the full potential of the gadget, you will learn not only to listen to music, but also to effectively manage calls and voice assistant without having to take the phone out of your pocket.
First Enabling and Activating the Device
Once the headphones are removed from the package, the first thing you need to do is charge them. Unlike the old models, where you had to take the film off the contacts, Redmi AirDots uses a system of magnetic charging contacts that activate automatically when placed in the case. Make sure that the indicators on the headphones themselves light up red, which signals the start of the charging process.
For the first switch on, you need to remove both earbuds from the charging case simultaneously, the device automatically goes into pairing mode, which is signaled by a fast flashing white-blue indicator, if the indicators do not flash, it is possible that the battery is completely discharged, and you need to hold them in the case for about 15-20 minutes.
⚠️ Warning: Don't try to connect your headphones to your phone until they go into search mode.If you connect only one headphone to your smartphone, the second one will remain inactive and the stereo mode will not work.
At that point, they're looking for each other to build an internal network, and then they're visible to external devices. 10-15 seconds.
💡
When you first use, leave the headphones in your case for 1-2 hours, even if the indicator shows a full charge.
The process of pairing with a smartphone
The next step is to search for the device in your mobile phone settings. Open the Settings → Bluetooth menu and activate the search for new devices. The list of available gadgets should appear as Redmi AirDots or Mi True Wireless EBs Basic, depending on the firmware version and region.
Click on the device name to start pairing. Successful connectivity will be confirmed by a voice message "Connected" and a change in the pattern of the indicator blinking - it will flash less often or go out in a few seconds. Now your headphones are ready to play audio.
☑️ Connection check
If a smartphone requests a confirmation or code, in standard situations, this model does not require code, just confirm the action on the screen. In rare cases, you can try to enter 0000, but usually the process is automatic.
| Status of the indicator | Meaning | User action |
|---|---|---|
| Slow red flashing | Low battery charge | Put it in the case for charging. |
| Fast blue-and-white blinking | Interconnection mode | Search for the device in Bluetooth |
| Burning red. | Charging's coming. | Expect full charge |
| Burning white (2 sec) | Full charge. | We can use it. |
Touch panel management
The main interaction with the headphones is through the sensory zones located on the outer surface of each module. The pressing must be confident, but not excessively strong, so as not to damage the speaker membrane. The system responds to single, double and triple touches, as well as to hold.
The standard control configuration means that the left earbud is responsible for calling the voice assistant and adjusting the tracks, and the right one is responsible for controlling playback and calls. However, the logic may differ slightly from firmware version to version, so it is important to test the device's reactions.
- 🎵 Single touch of the right earphone: start/pause playback or response to incoming call.
- 📞 Double touch of the right earphone: re-dialing the last number or completing the call.
- 🗣️ Double touch of the left earphone: activation of the voice assistant (Google Assistant or Siri).
- ⏭️ Triple touch of left earphone: switch to the next track in the playlist.
⚠️ Attention: The volume reduction or switching function on the previous track in the base version of Redmi AirDots is often missing or requires third-party activation apps.
To reset a call or turn off a microphone during a conversation, long-term retention of the sensory zone is often used. The response time to hold is about 1-2 seconds. If there is no reaction, you may be holding your finger too weak or, conversely, blocking the proximity sensor.
Dissynchronization problems and resetting settings
One of the most common problems owners face is desynchronization, where the sound comes from only one headphone or they work as two independent mono-devices. This can happen after a battery drain, a phone upgrade, or a software failure.
To do the reset, you need to put both earbuds in the charge case and remove them simultaneously. Wait for the indicators to light up red and then start flashing blue. At this point, you need to quickly press and hold the touchpads on both earbuds simultaneously for 5-7 seconds until the indicators go out or change the color of the blink.
Discharge procedure:
1. Remove the device from the Bluetooth list on the phone.
2. Put the headphones in the case.
3. Remove both earbuds.
4. Hold the sensors for 5-10 seconds before turning off the indicators.
5. Place again in the case and remove for a new pairing.Once successfully reset, the headphones will go back to pairing mode, so you need to re-find them in the smartphone's Bluetooth menu and pair them like you did when you first turned on, which clears the device's internal memory of configuration errors.
Why is there a desynchronization?
Features of operation and advice
To ensure battery durability and sound quality, it is recommended to adhere to certain rules of operation. Lithium polymer batteries used in Redmi AirDots are sensitive to temperature changes and deep discharges. Try not to leave the headphones discharged to zero for a long time.
Sound quality also depends on the density of the ear canal, which is usually three size silicone nozzles, and not only does the right size improve sound insulation, but it also prevents headphones from falling out when you're moving.
- 💧 Keep the device from moisture: the model does not have full moisture protection, sweat can damage electronics.
- 🧹 Regularly clean the speaker mesh of earwax using a dry soft brush.
- 📦 Keep your headphones only in a closed case to avoid spontaneous discharge.
⚠️ Note: Use of headphones in very low temperatures (below) -10°C) may cause a sharp decrease in battery capacity and temporary failure before the device warms up.
If you notice that the sound has become quieter or wheezing has appeared, check the equalizer settings on your smartphone. Sometimes software improvements to the sound in the shells of MIUI or other Android launchers can conflict with the codecs of the headphones.
💡
Regular cleaning of charging contacts in the case with a dry cotton swab prevents undercharging problems and prolongs the battery life.
Enhanced capabilities and compatibility
While Xiaomi Redmi AirDots is positioned as a universal device, the greatest functionality they reveal in conjunction with smartphones based on Android. iPhone users are also available basic functionality, but some specific commands may not work due to the limitations of iOS.
There is the option of using special modifier applications such as Material Pods or Mi True Wireless EBs Basic (unofficial versions), which allow you to change the purpose of the buttons and check the exact percentage of charge of each earphone separately.
The device supports an A2DP profile for high-quality stereo sound and an HFP profile for phone calls. Codecs are usually limited to SBC, which provides good compatibility, but does not guarantee audiophile sound quality, but for the budget segment this is the standard.
When updating the operating system of the smartphone, Bluetooth settings can sometimes be lost. If after the Android update, the headphones stopped working correctly, try forgetting the device and creating a pair again by performing a full reset described above.