Xiaomi’s popular Mi True Wireless Earbuds Basic 2 has been a hit in the budget acoustics market, offering decent sound quality for a minimal cost. However, like any electronic device, these headphones require the right initial setup to work smoothly. Many users face difficulties in pairing first without knowing about hidden features and connectivity features.
In this guide, we will take a look at the entire process of activating the headset, from extracting from the box to fine-tuning the audio settings. You will learn how to properly reset in case of errors, and understand how to optimize the operation of the device with your smartphone.
Note that the Basic 2 has a specific sensor algorithm that differs from the more expensive versions, and understanding these nuances will help you manage your music and calls without any unnecessary movement, so let's start at the beginning and make sure your headset works flawlessly.
First Insulation and Activation of Insulation
The activation process begins long before you connect to the Bluetooth network, and in the headphone box, you'll find special transport stickers on the charging contacts located on the inside of each headphone, which is critical because without removing these films, the device will not be able to charge and, accordingly, turn on.
Carefully examine the inside of each earpiece, and you need to carefully remove the transparent protective films from the metal contacts, which activates the battery and puts the device in charge-ready mode, and then place the headphones in the charging case and connect it to the power source.
⚠️ Warning: Do not try to turn on the headphones if the indicators do not flash after being removed from the case - chances are you forgot to remove the transport stickers and the device does not receive power.
Once installed, the charge indicator will light up, signaling the start of the process. Full charging takes about 1.5 hours, which provides up to 4 hours of continuous listening to music. It is recommended to fully charge the gadget before first using it for calibrating the power controller.
It is important to understand that Xiaomi Mi True Wireless Earbuds Basic 2 does not have a physical power button. Activation occurs automatically when removed from the charging case. If you take out the headphones and they are silent, check the charge level and the purity of the contacts.
Connection with Android and iOS devices
The main stage of the setup is to establish communication with the smartphone. the Basic 2 model supports Bluetooth 5.0 standard, which provides a fast and stable connection. The pairing process is almost identical to Android and iOS operating systems, but has its own features in the settings menu.
First, remove both earbuds from the case at the same time. The indicators will flash white, which means that the pairing mode is activated. If only one earbud flashes, put them back in the case, close the lid, wait 5 seconds and pull again. The synchronization between the left and right channel is automatic.
☑️ Checking before connection
Open your Bluetooth settings on your smartphone and start looking for new devices. The list of available gadgets will show a record of Xiaomi Buds or Mi True Wireless EBs Basic 2. Click on the name to connect. Once the communication is successfully established, the voice assistant will notify you of the status in English or Chinese.
It's worth noting that when you first connect, the headphones can only connect to one channel (usually the right one) and then broadcast the sound to the second one, which is normal for this model. If you hear sound from only one ear, try re-pairing by removing the device from the forgotten list.
Control of touch panels and voice
The headset is controlled by touch pads located on the outside of each earphone, and unlike mechanical buttons, sensors require a light touch, not a strong press, which provides moisture protection and prolongs the life of the device.
The touch control system includes single, double and triple taps, as well as long-term finger retention. The default settings may differ, but the basic functionality allows you to control playback and receive calls. Triple touch often activates the voice assistant or the previous track.
- 🎵 Single touch: pause or playback of music/acceptance of incoming call.
- 📞 Double touch: End of call / re-dial last number.
- 🔊 Triple touch: activation of the voice assistant (Google Assistant / Siri).
- ⏸️ Long-term retention (2 seconds): Calling the volume menu (on some firmware) or refusing to call.
If the headphones don't respond to touch, make sure your fingers are dry and clean. Fat or moisture can reduce the accuracy of the capacitive sensor response.
💡
To call the voice assistant, make sure that the Bluetooth phone settings allow system sounds to be transmitted, otherwise you won’t hear the assistant’s response.
Some users prefer to reassign functions through third-party apps, although official Mi True Wireless support for this model is limited.The standard command set covers 90% of user scenarios, making the management intuitive.
Diagnostics of indicators and statuses
Understanding color is key to quickly diagnosing the condition of the device, and the LED lights on the headphones and case tell the user about the current operating mode, charge level and connection errors, and ignoring these signals can lead to misuse.
When charging, the indicator on the case burns red, and when fully charged, it goes out or changes color to green (depending on the revision of the board), on the headphones themselves, red light means low charge, and white light means readiness to work or pairing.
| Status of the indicator | Meaning | User action |
|---|---|---|
| Red (constantly) | Low battery charge | Put it in the case for charging. |
| White flashing | Search mode (Pairing Mode) | Search for the device in Bluetooth |
| Red flashing | Connection error | Perform a reset settings |
| Green (case) | Full charge. | We can turn off the power. |
If you see unusual behavior of indicators, such as flashing red immediately after charging, this may indicate battery wear or contact failure, in which case it is recommended to clean the contacts with an alcohol wipe.
Why does red and white flash at the same time?
Also, in the cold season, the capacity of lithium-ion batteries is temporarily reduced, which can affect the frequency of blinking of the low-charge indicator.
Resetting settings and troubleshooting
In the process of operation, there can be situations when the headphones stop seeing each other or the phone, and Hard Reset is designed to solve these problems, which returns the device to factory parameters and clears the pairing memory.
To perform the reset, place both earbuds in a charging case. make sure they are fixed correctly and contact the charging feasts. Then press and hold the touchpads on both headphones simultaneously for 10-15 seconds until the indicators flash red several times.
⚠️ Warning: During reset, do not remove the headphones from the case and do not close the cover, otherwise the process may be interrupted, and the device will freeze in error mode.
After a successful reset, the indicators should light up red and then go into white blink mode. Now you need to re-remove the Xiaomi Buds device from the Bluetooth list on the phone and pair as a new gadget.
If the reset didn’t work, try updating your firmware through the Mi Home or Xiaomi Earbuds app if your version supports this feature. Often, desynchronization problems are solved with software patches from the manufacturer.
Optimization of sound and frequent questions
For maximum listening pleasure, consider the equalizer in your music player.The basic audio setup in Xiaomi Mi True Wireless Earbuds Basic 2 is balanced, but adding bass or high frequencies can improve the perception of specific genres of music.
It's also important to pick out the right sleeves, and there are usually several sizes of silicone nozzles, and using the wrong size not only causes discomfort, but also causes a loss of low frequencies, because the tightness of the canal is impaired.
💡
Properly selected size of the mounts is critical for bass quality and sound insulation, do not ignore the replacement of standard nozzles.
The regular cleanliness of the speaker's mesh also affects volume.Sulphur and dust can clog holes, making the sound quiet and deaf.Use a soft dry brush to service the acoustic mesh.