Modern. TWS-Xiaomi headphones have become the benchmark for price-performance, offering users advanced sound technology at an affordable cost. However, the first acquaintance with the gadget is often questionable, especially for those who have previously used wired models or devices from other brands. The initial setup process requires a clear understanding of the sequence of actions, as standard Bluetooth algorithms here can work with their own nuances.
Most of the time, the connection is automatic, thanks to Qualcomm or Realtek chips used in the new Redmi and Mi True Wireless series. But sometimes the system requires manual intervention, resetting or specific actions with the touch panels. It is important not just to “find the device”, but also to properly configure the modes of operation for a stable connection.
In this guide, we will take you through all the steps from case extraction to fine-tuning through a proprietary app, and learn how to avoid common pairing errors and how to get all the features, including voice assistant and noise control, to work.
Preparation of Xiaomi headphones for the first pairing
Before you try to find a device in the Bluetooth list, you need to make sure that the headset is ready to go. Many users make the mistake of starting the search immediately after unpacking, forgetting about the protective films on the charging contacts. Make sure that all insulation stickers are removed from both headphones and from the contact points inside the case.
Put both earphones in the charger case and close the lid for a few minutes, which is necessary to activate the internal power controllers. If the indicator on the case (or inside it) does not light up when opened, then the battery is completely discharged, and you need to connect a USB-C or Micro-USB cable for primary charging.
To enter pairing mode, it usually requires a long press on the function button. Depending on the model, it can be located on the end of the case or on the inner wall between the headphones. Hold it for about 2-3 seconds until the indicator flashes white - this is a signal that the airing mode is activated.
- 🔋 Make sure the case is charged at least on 20-30% for stable operation of the Bluetooth module.
- 📱 Unlock your smartphone screen and enable geolocation (required for some quick search protocols).
- 👂 Check the absence of protective films on the metal contacts of the headphones themselves.
⚠️ Warning: If the indicator flashes red or orange instead of white, this may indicate a critically low charge or an error in synchronization of the left and right channel. 15-20 minute.
It is important to understand that different series of devices have their own characteristics. For example, in Mi True Wireless Earbuds Basic models, the button may be missing, and the interface mode is entered by touching the sensors. In more advanced versions, such as the Mi Air 2 Pro, the process is fully automated when the lid is opened next to the Xiaomi phone.
Connection to Android-based smartphones
Android provides the most extensive management experience for Xiaomi headphones. The standard algorithm involves going to the settings menu. Open Settings → Bluetooth and make sure the slider is activated. Click Device Search or just wait for the list to update.
When your model name appears on the list of available devices (e.g. Mi True Wireless EBs) Basic_R), You click on it. The system will request a proof of pairing. Once the connection is successful, the device name will change to remove the prefix " R" or " L", which means combining stereo channels.
For Xiaomi and Redmi smartphone owners, the process is even easier thanks to MIUI Pop-up technology. Just open the case lid next to the unlocked phone. The screen automatically displays an animated window with the image of the case and the charge level of each earphone. Press the "Plug" button to complete the procedure in a couple of seconds.
☑️ Checklist of successful connection
It should be noted that for the full operation of all functions, such as updating the firmware and setting up the equalizer, one Bluetooth pairing is not enough. You need to install additional software that will unlock the full potential of the accessory.
Connection with iPhone (iOS) and other devices
Owners of Apple devices can also use Xiaomi headphones, although the process is devoid of proprietary MIUI animation. The principle of operation here is classic for any Bluetooth headsets. Open “Settings” on the iPhone, go to the Bluetooth section and wait for the device to appear in the list of “Other devices”.
Click on the model name to start pairing. iOS can request permission to use the microphone and access contacts — this is standard procedure for headsets with support for calls. Once confirmed in the status bar, the headphone battery icon will appear, which is a big plus of iOS integration.
However, basic connectivity is not enough to adjust gestures, and to change double-touch actions or activate game mode, iPhone owners will need a third-party app, without which management will be limited to basic playback and call reception functions.
- 🍏 Make sure iOS is no older than 10.0 for stable codec performance.
- 🔊 Check the volume balance in the availability settings if the sound seems quiet.
- 🔄 If you have problems, try “Forget the device” and pair again.
Devices on other platforms, such as HarmonyOS or various Android shells from Samsung and Asus, connect similarly to the standard method via the Bluetooth menu.The main thing is to make sure that the headphones are not connected at this point to another gadget, as they can automatically try to restore the last communication.
Setup through the Xiaomi Earbuds app
To reveal the full functionality, including the setting of noise reduction (ANC), transparent mode and update firmware, you need to use specialized software. The official application is called Xiaomi Earbuds (formerly Mi True Wireless), you can download it from the Google Play Market or App Store.
Once installed, launch the app and grant the necessary permissions. It will automatically scan the airwaves and find the connected headphones. If the devices don't show up, press the + button in the top corner and select your model from the list manually, a critical step for iPhone users.
Path in the application menu: Profile → Headphone settings → GesturesInside the app, you can Customize actions for the left and right earphone separately, and features are available: double-touch, triple-touch, long-press, and you can activate low-latency (Game Mode) mode, which significantly improves the response in games.