Xiaomi Smart Home Screen 6: Smart screen for home management – review, customization and secrets of use

Xiaomi’s smart screens have long since ceased to be just displays for watching videos – they have become central hubs for managing the entire smart home ecosystem. TV Master 65" OLED In some regions, it is not only a premium. OLED-It also offers a display, but also deep integration with the Mi Home, Google Assistant and Apple HomeKit, which can replace several devices: a TV, a lighting control panel, cameras, sensors and even a robot vacuum cleaner.

However, many users have difficulty configuring: how to connect the screen to an existing smart home system? why some devices don’t appear in the interface? how to set up automation via Mi Home or Google Home? In this guide, we will analyze all the features of the Xiaomi Smart Home Screen 6, from basic configuration to advanced scenarios, and compare it with other models of Xiaomi and competitors. If you are just planning a purchase, here you will find objective pros and cons that will help make a decision.

Technical Features: Why It's Not Just a TV

At first glance, the Xiaomi Smart Home Screen 6 looks like a premium TV, but its “stuffing” is optimized for working with a smart home. TV:

• 🔹 Processor: MediaTek MT9950 It's a neural coprocessor that can process voice commands and analyze sensor data, and it allows the screen to respond to queries faster than a conventional Smart. TV.
• 🔹 RAM: 4 GB (vs. 2-3 GB for most TVs) – critical for simultaneous operation with multiple smart home devices.
• 🔹 Built-in protocols: support for Zigbee 3.0, Bluetooth 5.2, Wi-Fi 6 and Thread (for Matter compatibility) means the screen can directly control sensors without additional hubs.
• 🔹 Microphones and cameras: 4 built-in noise-canceling microphones and TOF-Time-of-Flight camera for gesture recognition and presence in the room.

It’s important to understand that the Smart Home Screen 6 is Xiaomi’s first device to fully support Matter out of the box, which means it can be integrated not only with the Mi Home ecosystem, but also with Google Home, Apple HomeKit or Amazon Alexa without additional bridges. For example, you can control Philips Hue light bulbs through the Xiaomi interface if they support Matter.

⚠️ Note: If you use Zigbee-based smart home devices (such as Aqara sensors or Xiaomi Mi Sensor), then Smart Home Screen 6 may conflict with other hubs on the network. Before connecting, turn off repeating Zigbee devices (such as Mi Gateway) to avoid duplication of signals.

Connecting to the Smart Home Ecosystem: Step-by-step Instructions

Set up Xiaomi Smart Home Screen 6 as a home management center consists of three steps: connecting to the network, linking your Mi Home account and adding devices. Let’s take a closer look at each step.

First, turn on the screen and connect it to the Internet via Wi-Fi 6 (recommended) or an Ethernet cable. For a stable smart home, it is better to use a wired connection, which will reduce delays when managing devices.

1. Launch the Mi Home app on your smartphone and log in to your account.
2. Click Add Add the device (+) → Choose the category Televisions and Displays.
3. Scanner. QR-The code will automatically detect Smart Home Screen 6. If this does not happen, select the model manually.
4. Confirm the binding on the TV screen (the pairing code will appear).

Once the account is attached, the screen syncs all devices previously added to the Mi Home.However, some devices (e.g., Xiaomi Mi Home Security Camera 360)°) You may need additional authorization to do so:

Check for screen firmware updates

Shut down. VPN on the phone and TV

Make sure devices are on the same Wi-Fi network

Restart router if devices are not displayed-->

If after synchronization, some devices do not appear in the screen interface, check their compatibility. Door/Window Sensor (first generation) are not directly supported, but require a separate Mi Gateway hub.

💡

To speed up the process of adding devices, use the Quick Setup feature in Mi Home. To do this, press and hold the button on the device (for example, on Xiaomi Mi Smart Plug) for 5 seconds until the indicator flashes.

Device management: interface and voice commands

The Smart Home Screen 6 interface is divided into three main areas: the Quick Access Panel (bottom of the screen), the Device Widgets (center) and the Automation Menu (right).

The Quick Access Panel allows you to control frequently used devices with one touch, and by default, it shows:

• 💡 Lighting (Yeelight lights, Philips Hue)
• 🔌 Xiaomi Mi Smart Plug, Aqara Smart Plug)
• 🌡️ Climate (air conditioners, heaters, fans)
• 🔒 Safety (cameras, motion sensors)

To add the device to the panel, go to Settings → Smart home. → Change the Quick Access Panel, where you can drag and drop device icons, group them into rooms or types (e.g. Bedroom or Kitchen»).

Voice control works through the built-in XiaoAI assistant or Google Assistant. Examples of commands:

• 🗣️ «XiaoAI, turn off the lights in the living room»
• 🗣️ «Okay, Google, show the camera at the front door on the screen»
• 🗣️ «Include the script "Getting to Work“»

To activate the voice assistant, you can use:

• 🎤 The microphone button on the remote (hold 1 second).
• 🗣️ Voice command “Hello XiaoAI” (if the “Voice Activation” function is enabled in the settings).
• 👋 The gesture to wave your hand in front of the camera (you need to include in Settings) → Smart home. → Gesture management).

⚠️ Warning: If voice commands are running late, check microphone settings in Settings → Sound. → Microphone settings: Turn off Noise Cancelation, which sometimes mistakenly filters the user's voice.

Automation and scenarios: how to set up a smart home for yourself

One of the key features of Smart Home Screen 6 is that it supports complex automation scenarios that can involve multiple devices at once, such as an Evening Theater scenario that can:

• 🎬 Turn off the main light and turn on the Yeelight backlight at 30% brightness.
• 🔊 Set the sound on the Movie mode in the soundbar.
• 🚪 Close the curtains Xiaomi Mi Smart Curtain.
• 📱 Send a notification to the phone: "The movie begins!».

To create this scenario:

1. Go to Settings. → Smart home. → Automation.
2. Click Create a Script → Customized.
3. Add a trigger (start condition) such as a voice command "Evening Theater" or pressing a button on the remote.
4. Add actions for each device (see the list above).
5. Save the script and test it out.

Mode available for advanced users IFTTT (If This Then That, which allows you to create chains of actions with delays:

IF (the traffic sensor in the corridor is activated)




And (time between 22:00 and 6:00)




THEN:




1. Turn on the light in the corridor at 50% brightness




2. 3 minutes to turn off the light (if no movement is detected)




3. Send a notification to the phone: "Movement in the corridor"

The Smart Home Screen 6 also supports geo-start, which is location-based automation, for example, when you drive up to your house, the screen can turn on the heater and lights.

1. In the Mi Home app, go to Profile → Geolocation.
2. Set up the "Home" area (at least 200 meters radius for stable operation).
3. Create a script with the “Coming Home” trigger.

Comparison with other Xiaomi devices: which is better to choose?

If you are choosing between the Smart Home Screen 6 and other Xiaomi models, it is important to understand the key differences.

When to choose Smart Home Screen 6?

• 🏡 You need a full-fledged smart home control center with support for all protocols.
• 🖥️ You use devices of different brands (Philips Hue, Aqara, Tuya).

When is the best time to choose another model?

• 💰 Budget limited - Mi TV Q2 cheaper%.
• 🎮 Priority is gaming features (120 Hz, low input lag). TV Master or Redmi Max 100".
• 🖼️ Design is important – Xiaomi Wallpaper TV It is thinner and lighter, but without the functions of a smart home.

💡

If you already have a smart home hub (like the Aqara Hub or Home Assistant), then the Smart Home Screen 6 can be used as an optional control display, but its built-in Zigbee hub will be idle.

Frequent problems and their solutions

Despite the advanced features, Smart Home Screen 6 users sometimes face technical challenges, and let’s look at the most common problems and ways to fix them.

1. Smart home devices are not displayed on the screen

• 🔄 Reboot the screen and router.
• 📱 Make sure devices are tied to the same Mi Home account as the screen.
• 🌐 Check that all devices are connected to the same Wi-Fi network (guest network is not suitable).
• 🔧 Update the screen firmware in Settings → On TV. → Updating the system.

2.Voice assistant doesn't respond to commands

• 🎤 Check if the microphones are silenced in the settings (Settings) → Confidentiality → Microphone).
• 🗣️ Switch the language of the assistant to Russian (if you use XiaoAI).
• 🔊 Turn down the volume of the TV – sometimes the assistant doesn’t hear the commands because of the noise.

3. The screen spontaneously turns on or off

This may be related to:

• 👁️ Smart Presence (camera responds to motion) Turn it off in Settings → Smart home. → Presence sensors.
• ⏰ Sleep Timers in Settings → Energy conservation.
• 🔌 Power problems. Try connecting the screen to another power source.

4. Smart home interface freeze

If the device widgets are suspended or not updated:

• 🗃️ Clear the cache of the Mi Home app on the screen (Settings) → Annexes → Mi Home → Clear the cache).
• 🔄 Reset the screen by holding the power button on the remote (10 seconds).
• 📵 Disable and reconnect your Mi Home account in screen settings.

⚠️ Warning: If automation scenarios stop working after a firmware update, check their settings. Sometimes updates reset triggers over time (e.g., the Awakening scenario may get lost in the settings). UTC-Resave the script with the correct time zone.

Integration with other ecosystems: Google Home, HomeKit, Alexa

One of the main features of Smart Home Screen 6 is the support for Matter, which allows you to combine devices from different brands in one system.

1. Connecting to Google Home

1. Install the Google Home app on your smartphone.
2. Press Add Add Add (+) → Set up the device → New device.
3. Select Xiaomi from the list of brands and sign in to your Mi Home account.
4. Allow access to devices. After that, Smart Home Screen 6 will appear in the list of devices Google Home.

2.Integration with Apple HomeKit

To connect to HomeKit, you will need:

1. Download the Mi Home app and update the screen firmware to the latest version.
2. B Settings → Smart home. → Integration with other systems to choose Apple HomeKit.
3. Scan. QR-code that appears on the screen in the Apple Home app.

Note that not all Xiaomi devices support HomeKit, and you can find a full list of compatible gadgets on the Apple HomeKit website.

3.Management through Amazon Alexa

To work with Alexa:

1. In the Amazon Alexa app, go to Devices → Add the device.
2. Choose Xiaomi and log in.
3. After syncing, say, “Alexa, find my devices.”

Important: When integrated with third-party systems, some features may be limited, such as Google Home, you can’t configure gestures or latency scripts, just basic on/off commands.

FAQ: Answers to popular questions