Modern peripherals from Xiaomi are famous for their minimalism and high autonomy, but the initial setup often raises questions from users. USB-The process of activating the pairing mode may vary depending on the particular device model.
In this article, we will take a closer look at the algorithms for different versions of mice, including the popular Mi Silent Mouse and Dual Mode series. You will learn how to properly put the device into visibility mode, what drivers may be required and why the computer sometimes ignores new hardware. Understanding these nuances will save you time and nerves on the first start.
It’s worth noting that connection stability is directly dependent not only on battery power, but also on the operating system version of your PC or laptop. Windows 10/11 and macOS have their own Bluetooth stack features that you need to consider. We’ll look at the universal steps that are suitable for most use cases.
Preparation for first inclusion and compatibility check
Before you start the pairing procedure, make sure your device is ready to go. First of all, check the battery compartment located on the bottom panel. If you use AA batteries, make sure that they are inserted polarly and the protective film is removed.
Many new Xiaomi models come with pre-loaded batteries, but they are often in “sleep” mode or discharged after long storage. A Bluetooth module requires stable voltage to work properly, so fresh batteries are key to success. Older batteries can interfere or not provide enough power for a radio signal.
It's also important to check your computer's technical capability. The built-in Bluetooth adapter needs to be functional and on. If you're using a desktop PC without a built-in module, you'll need an external one. USB-Adapter (dongle) that supports current communication standards.
☑️ Connection readiness
Remember that metal surfaces or nearby powerful Wi-Fi routers can temporarily degrade signal quality, and it is recommended to perform the initial setup at a distance of no more than 50 cm from the receiver.
How to Connect to Mi Silent Mouse
The Mi Silent Mouse is one of the most common models, thanks to its quietness and ergonomic design, and the process of connecting it is as simple as possible by the manufacturer. On the bottom of the body is a mode switch, which is marked with icons. BT (Bluetooth and 2.4G (for USB-whistle).
To activate the search mode, you need to move the slider to the position BT. At this point, the indicator on the housing (usually located next to the scroll wheel or at the bottom) should start flashing blue. This means that the mouse broadcasts a signal about its readiness to connect.
⚠️ Warning: If the light is not flashing, but just burning or not lighting at all, try briefly pressing the switching button or re-extracting and inserting the batteries again».
On your computer, open your Bluetooth settings and click Add Device. The list of available gadgets should show the name Mi Silent Mouse or Mi Wireless Mouse. Click on it to complete pairing. Once the connection is successful, the blinking will stop.
💡
To save power, the mouse automatically goes to sleep after 15 minutes of inactivity. To wake it up, just click any button.
If the system requests a confirmation code, type 0000, although this is rarely required for Xiaomi peripherals.
Customization of Dual Mode devices (2.4G and Bluetooth)
More advanced models, such as the Mi Dual Mode Silent Mouse, support simultaneous connection to and switching between two devices, allowing the use of a single mouse for both a laptop and a tablet, switching by a combination of buttons or a separate switch.
To enter the pairing mode on such models often requires a long press (about 3-5 seconds) on the channel switch button or a special hidden button at the bottom.
- 🔵 Make sure you select a Bluetooth channel (usually indicated by a blue dot or a label). BT).
- 🔵 Press the pairing button before the indicator flashes frequently.
- 🔵 On PC, find the device in the list and connect.
- 🔵 To switch to another device, briefly press the channel change button.
It is important to distinguish between modes of operation: in 2.4G The mouse works through USB-Minimal latency whistle, which is critical for gaming, whereas Bluetooth is more convenient for office work and saves money USB-When switching between modes, the device may require re-confirmation on the receiving side if a long time has elapsed.
How to reset Bluetooth settings on the mouse?
Problem Solving: The computer can't see the mouse
It's not uncommon for a device to not appear on the list of available devices, and most often it's because of Bluetooth adapter drivers, go to the Device Manager and check the "Bluetooth" section, and if there's a yellow exclamation point next to the adapter, you need to update the drivers.
Another common problem is Bluetooth version conflict: Older adapters 3.0 and below may not work properly with new mice using Bluetooth Low Energy protocol (BLE). This will help to acquire a modern USB-Adapter version 4.0 or 5.0.
| Problem. | Possible cause | Decision |
|---|---|---|
| No device on the list. | The pairing mode is not activated | Press the button on the bottom of the mouse for 5 seconds |
| Connection error | Weak battery charge. | Replace the food |
| The cursor moves in jerks | Interference from Wi-Fi router | Remove router or change channel |
| Unintentional shutdown | Energy saving settings | Turn off energy savings for USB |
Also worth checking out is Windows services, and make sure that Bluetooth Support Service is running and set to Auto Start, without which the operating system won't be able to control wireless devices.
Features of working with macOS and Linux
Users of the Apple family of operating systems may find that additional mouse buttons (forward / back) do not work by default. Their activation often requires the installation of special software, since macOS does not have native drivers for customizing Xiaomi buttons.
In Linux environments (Ubuntu, Fedora, Mint) the connection is usually automatically enabled by built-in support. HID-However, if the cursor is moving with acceleration or inversion of the axes, manual adjustment via xinput or GNOME Tweaks.
For Macs, it's important to keep a tight energy-saving policy in mind, because the system can aggressively turn off Bluetooth devices to save charge, and in the energy-saving settings, it's worth checking if you check the box to turn off the adapter when you're down.
FAQ: Frequently Asked Questions
Can I use it? USB-whistle from another Xiaomi mouse?
What is the range of the Xiaomi Bluetooth mouse?
Why does a mouse run out quickly in Bluetooth mode?
Does Mi Silent Mouse support macros?
To sum up, connecting Xiaomi’s mouse is a simple process, but it requires attention to detail. Keeping the sequence of actions and understanding the principles of wireless interfaces will help you avoid typical mistakes.