Introduction: Why you need a Xiaomi cleaner and how it works
Xiaomi cleaners are hybrid devices that combine dry and wet cleaning functions. They not only collect dust and debris, but also wash floors at the same time, saving you time. Unlike traditional vacuum cleaners, Xiaomi Mi Robot Vacuum-Mop or Xiaomi DreameBot models are equipped with water tanks and detergent, as well as intelligent sensors for indoor navigation.
The basic principle of operation: the device sprays water on the surface, then rotating brushes or microfiber wipe removes the contaminants, and the built-in vacuum cleaner sucks moisture together with the dust. This is especially true for families with children or allergies, where not only cleanliness, but also hygiene of the floors is important. However, improper use can lead to breakage or poor cleaning - so it is so important to understand the nuances.
In this article, we will discuss in detail how to prepare a vacuum cleaner for the first cleaning, which modes to choose for different surfaces, how to care for the equipment so that it lasts longer, and what mistakes users often make, and also answer popular questions, such as whether you can use ordinary water instead of distilled water or how to clean the tank from scale.
Preparation of Xiaomi cleaner for the first cleaning
Before you start, you have to do a few things. First, unpack the device and check the equipment: the box should have the vacuum cleaner, the charging station, the power cable, the water tank, the wet wipe, the side brushes and the instructions. Pay special attention to the condition of the sealing rubber bands on the tank - they should not be damaged.
Next, install the vacuum cleaner on the charging station and connect it to the network. 4–6 Even if the indicator shows 100% This is necessary for calibrating the battery, and while the device is charging, you can download the official Mi Home app. Android/iOS) You can create a Xiaomi account if you don't already have one, and you'll need an app to set up your cleaning schedule, select modes, and monitor the vacuum cleaner.
- 🔋 Charging: only use the original power adapter. Some models (e.g. DreameBot) L10 Pro) support fast charging, but the first onset is better carried out in standard mode.
- 📱 Wi-Fi connection: vacuum cleaner should be near the router (no more than 5 meters). In the application, select the device model and follow the tips to pair.
- 💧 Water preparation: for the first cleaning, use distilled or boiled water - this will prevent the formation of scale in the tank.
⚠️ Warning: If the vacuum cleaner doesn't turn on after charging, check if the water tank is properly installed.
Charge the vacuum cleaner to 100% | Install the Mi Home| Connect the device to Wi-Fi| Pour water into the tank (not higher than the maximum mark) | Check the purity of brushes and filters-->
Modes of operation: which to choose for different surfaces
Xiaomi cleaners offer several cleaning modes, which differ in suction intensity, water flow and trajectory.
- 🌀 Standard: Suitable for daily cleaning on laminate, tiles or linoleum. The vacuum cleaner moves along a zigzag trajectory, evenly distributing water.
- 💨 Turbo: increases suction power and water consumption. Use for severe contaminants (e.g. after repair) or short-pile carpets. Do not apply this mode on parquet or moisture-sensitive coatings!
- 📍 Area cleaning: allows you to clean a specific area (such as near the front door). Set up the area in the Mi Home app or with a voice assistant.
- 🔄 Re-cleaning: The vacuum cleaner goes through the same place twice, useful for the kitchen or bathroom, where fat and lime plaque accumulate.
For long-pile carpets, most Xiaomi models automatically turn off the wash function to avoid damaging the coating. However, some advanced devices (such as the DreameBot W10) are equipped with humidity sensors and can adapt water flow. If your vacuum cleaner does not support this feature, remove the water tank before cleaning the carpet and use only dry cleaning mode.
| Surface. | Recommended treatment | Water consumption | Additional settings |
|---|---|---|---|
| laminate | Standard. | Medium. | Disable turbo mode, use minimum water pressure |
| Tile. | Standard or Turbo | High-pitched | Add a detergent to remove lime plaque |
| Carpet (short pile) | Turbo (no water) | — | Use only dry cleaning or a special nozzle for carpets |
| parquet | Standard (with minimal water consumption) | Low. | After cleaning, wipe the floor with a dry cloth. |
Standard |Turbo |Zonal cleaning |Repeated cleaning |I don't know what to choose-->
How to fill a water tank and detergent
Not only does cleaning quality depend on the proper filling of the tank, but the life of the vacuum cleaner as well. Most Xiaomi models have two separate containers: one for clean water, one for detergent (if supported).
- Open the water tank cover (usually on top or side).
- Pour the water to the maximum mark (MAX). Do not exceed this level - this can lead to leaks.
- If your model supports detergent (e.g. Xiaomi Mi Robot Vacuum-Mop 2 Pro), add it to a special compartment. Use only liquids recommended by the manufacturer.
- Make sure the sealing gum on the lid is clean and fits tightly.
- Install the tank back into the vacuum cleaner before clicking.
For optimal results, use warm water (temperatures below 40°C) to dissolve detergent better and to cope with fatty contaminants. However, some models (such as the DreameBot Z10 Pro) have a water temperature limit of no more than 30°C to avoid damaging the interior parts.
⚠️ Warning: Never use bleach, vinegar or abrasive cleaners – they can damage rubber seals and vacuum cleaner filters.
💡
If you have a stain on the floor after cleaning, reduce the amount of detergent or use distilled water, most often due to the high hardness of the tap water.
Care for Xiaomi washing vacuum cleaner: cleaning and maintenance
To last longer, the vacuum cleaner needs to be cleaned and maintained regularly.
- 🧹 Main brush: after each cleaning, remove the wound hair and thread. To do this, remove the brush (usually it is attached to the latches) and clean it with scissors or a special tool from the kit.
- 💦 Water tank: wash after each use with warm water and dry. once a month disinfect with a weak solution of citric acid (1 tsp per 1 liter of water).
- 🔄 Filters: HEPA-The filter and sponge filter should be cleaned every 1-2 weeks (depending on the intensity of use), wash them under running water and dry them completely before installation.
- 🧽 Microfiber wipe: wash it manually at a temperature not higher than 30°C without aggressive detergents. Do not use bleachers!
Pay special attention to the sensors and contacts at the charging station. Rub them with a dry cloth once a week to avoid oxidation. If the vacuum cleaner has become less orientated in space or does not return to the base, the sensors are likely contaminated. Use a cotton swab dipped in alcohol to clean.
What to do if the vacuum cleaner has stopped sucking water?
Common Mistakes and How to Avoid Them
Even experienced users sometimes make mistakes that shorten the life of the vacuum cleaner or impair the quality of cleaning.
- 🚫 Using ordinary tap water: the hardness of the inside creates a scale that clogs the pipes and pump. Always use distilled or boiled water.
- 🔌 Incomplete charging before first cleaning: This can cause the battery to be miscalibrated and capacity to be reduced.
- 🧼 Excess detergent dosage: This not only leaves divorces, but can also damage rubber seals.
- 📵 Ignoring firmware updates: the manufacturer regularly releases updates that improve navigation and add new features. Check for updates in the Mi Home app once a month.
Another mistake is cleaning in high-humidity areas (such as the bathroom immediately after the shower), condensation can get inside the vacuum cleaner and cause short circuits, wait until the humidity is normalized, or use dry cleaning mode.
⚠️ Warning: If the vacuum cleaner starts to make unusual sounds (squeaking, knocking) or move in jerks, immediately stop cleaning and check if a foreign object has hit the mechanism.
💡
Regular maintenance (cleaning brushes, filters and sensors) increases the life of the vacuum cleaner by 30-40%. Neglect of care is the main cause of breakdowns in the first 2 years of operation.
Additional features: voice control and integration into the smart home
Xiaomi vacuum cleaners support integration with the Mi Home ecosystem, allowing you to control them by voice or through other smart devices.
- 🎤 Start cleaning by voice: via Alice (Yandex), Google Assistant or Siri (if the vacuum cleaner is connected to Apple HomeKit through the Mi Home gateway».
- 📅 Set up a schedule: you can set the days and times of cleaning in the Mi Home app, and you can also choose the modes for different rooms, for example, clean the kitchen in turbo mode, and the bedroom in standard mode.
- 🔗 Sync with other devices: The vacuum cleaner can automatically start cleaning when you leave the house (according to the geolocation of the smartphone) or when the air quality sensor detects high levels of dust.
To set up voice control:
- Open the Mi Home app and go to your vacuum cleaner settings.
- Select Voice Assistant and follow the instructions to connect to Yandex, Google or Siri.
- Come up with a unique name for the device (like “Robot Assistant”) so that the voice assistant doesn’t get confused if you have multiple smart gadgets.
If the vacuum cleaner does not respond to voice commands, check:
- Internet connection (the device must be online).
- Geolocation settings (some features only work on the home network)
- Firmware updates (outdated software may not support voice control).