Modern peripherals from Xiaomi are famous not only for minimalist design, but also high functionality, and the Fashion Mouse model is no exception. Users often face difficulties when first starting a gadget, since the pairing process can vary depending on the operating system and the method of communication chosen. In this guide, we will discuss in detail all the nuances of setting up a wireless mouse so that you can immediately start a comfortable work.
The main difficulty is that the device supports two modes of operation: the classic 2.4 GHz through the USB-Whistle and modern Bluetooth 4.0. Many owners try to connect the device only through one port, unaware of the presence of hidden mode switching buttons on the bottom panel. Understanding these differences is critical to successful synchronization with a laptop, tablet, or desktop computer.
We have developed a step-by-step algorithm that will help you avoid common errors, such as battery drain during setup or the wrong driver choice, and by following the instructions, you can activate all the functions of the manipulator, including adjusting the sensitivity of the sensor and energy saving.
Preparation for the first start of the device
Before you try to connect Xiaomi Fashion Mouse to your computer, you need to perform a number of preparatory steps. First of all, make sure that the power compartment has a fresh AA element or a fully charged battery if the model supports this option. Often the factory insulation tape blocks the contact, so carefully inspect the battery compartment and remove all protective films.
It is important to check whether USB-And this is a little module that's key to 2.4 GHz, and without it, wireless connectivity is impossible. If you plan to use Bluetooth, make sure your computer or laptop has the appropriate communication module.
⚠️ Note: Do not use old or partially discharged batteries when setting up for the first time, as low voltage can cause unstable operation of the Bluetooth module and inability to detect the device.
Once the power is in place, flip the mouse and find the mode switch, which can be designated B (Bluetooth) and 2.4G, or have a graphic image, and move the slider to the position of the desired connection type to activate the appropriate radio module inside the housing.
Connection through USB-receiver
The easiest and fastest way to get started is to use a complete USB-Transmitter: This method does not require the installation of additional software, since Windows, macOS and Linux operating systems recognize the device as standard. HID-mouse immediately after connection.
Put it in. USB-receiver to the free port of your computer. USB 2.0 or 3.0, located directly on the motherboard (back of the system unit), to provide a stable signal.
☑️ Checking the 2.4 GHz connection
If the cursor doesn't show up, try reconnecting the transmitter to another port. Sometimes it takes a few seconds for the system to install standard drivers. Make sure the distance between the receiver and the mouse is less than a few meters, and there are no massive metal obstacles between them.
💡
For best signal stability, avoid connecting USB-long-distance USB-hubs without their own power, especially if there are Wi-Fi routers nearby.
Setting up Bluetooth connection
Using Bluetooth Frees You Up USB-port and allows you to connect your mouse to devices that do not have classic connectors, such as ultrabooks or tablets. First, switch the switch on the bottom panel to B mode or BT. The indicator on the body should start to blink slowly, which means going into pairing mode.
On your computer or smartphone, open your Bluetooth settings and start searching for new devices. The list of available gadgets should appear as Xiaomi Mouse or Mi Portable Mouse. Click on the name to initiate the process (pairing).
In some cases, the system may request code confirmation or simply report a successful connection, and then the manipulator is ready to go.
| Parameter | 2.4 GHz mode | Bluetooth mode |
|---|---|---|
| Delayed response | Minimum | Low. |
| Class. USB-port | Required. | Not required |
| Energy consumption | Average. | Low. |
| Compatibility | PC, Laptops | PCs, tablets, smartphones |
What if Bluetooth can’t see a mouse?
Sensitivity adjustment and DPI
One of the key features of Xiaomi Fashion Mouse is the ability to change the sensor resolution on the fly, which allows you to adapt the speed of the cursor for tasks: high speed for working with large monitors and low for accurate work with graphics or text.
To change the DPI (dots per inch) setting, press a special button located directly below the scroll wheel. Each time you press the value changes cyclically, three fixed values are usually available, such as 800, 1200 and 1600 DPI, although the exact numbers depend on the specific model modification.
⚠️ Attention: When switching DPI The cursor can change the speed of your movement dramatically. Don't be afraid of it, just wait for your hand to adjust to the new sensitivity or switch back to the mode.
Visually, the change of mode can be tracked by the color or frequency of the flashing of the LED indicator, if it is provided by the design. For users working with high screen resolutions (4K and above), it is recommended to set the maximum DPI value for comfortable movement on the desktop.
💡
The DPI change button is located under the scroll wheel and allows you to instantly change the sensitivity of the cursor without software settings.
Installation of drivers and additional software
Although the mouse is in Plug-and-Play mode, advanced functionality may require the installation of proprietary software. Official drivers allow you to reassign buttons, adjust macros and adjust energy saving parameters more finely.
You should only download the software from the manufacturer’s official website or through the Mi Home app if the model supports integration into the smart home ecosystem, and you can track the battery level and receive notifications about the need to replace the battery.
The installation process is standard: download the installer, run it, and follow the instructions on the screen. Once the computer is restarted, the mouse control icon will appear in the tray, where all advanced settings are available, which is especially useful for users who want to adapt the behavior of the left and right buttons to their habits.
Solution (Frequent problems)
Despite the reliability of Xiaomi’s equipment, users may face a number of typical problems: If the mouse is running in jerks, it is likely a problem with radio interference or a dead battery. Try to replace the power source with a new one and remove working microwave ovens or powerful routers from the receiver.
If the cursor disappears or moves randomly, check the surface on which the mouse is located. Optical sensors may not work properly on glossy, transparent or mirrored surfaces. Using a mouse mat solves 90% of tracking problems.
If the device fails completely, reset the battery, press any button for 10 seconds, insert the battery back, and press the plug-in button, which will force the module to search mode.
⚠️ Warning: If the mouse stops responding after getting the liquid, immediately remove the battery and place the device in a container of rice on the surface. 24-48 Do not try to dry with a hair dryer, as hot air can damage plastic parts.