Xiaomi kettle how to turn on bluetuz: step-by-step instructions

Xiaomi’s smart kettles have become a popular part of the smart home ecosystem, allowing you to not just boil water, but manage temperature and heating time remotely. However, many users face difficulties in the first stage: they can not understand how to activate a wireless module to communicate with a smartphone. Unlike smartphones or TVs, there is no usual menu settings on the screen.

The process of activating Bluetooth in such devices is often hidden from the user's eyes and requires a specific sequence of actions. This is done for safety and energy savings, since the radio module is not required to work constantly in normal mode. Key point: in most models of Xiaomi kettles, the Bluetooth module is activated only in pairing mode, which is forced to turn on.

In this article, we will explore all the nuances of connecting popular models such as the Mijia Electric Kettle Pro or Viomi Smart Kettle. You will learn how to properly prepare the device, what application to use and what to do if the phone does not see the kettle. Understanding the logic of these gadgets will help to avoid unnecessary waste of time and nerves.

The principle of operation of a wireless module in smart kettles

Technically, the kettle doesn't have its own screen or a sophisticated operating system that allows the user to turn on Bluetooth at will via the menu. The radio module here works in sleep mode most of the time. Activation only occurs under certain conditions, usually resetting network settings or a special waiting mode for connection.

When you hold the buttons on the body, you send a signal to the microcontroller to go to Pairing Mode. In this state, the device begins to broadcast its ID, becoming visible to external scanners. Without this step, the Mi Home or Viomi Home app simply will not be able to detect the kettle in range.

💡

Make sure that geolocation (GPS) and Bluetooth are enabled on your smartphone before you start searching for the device, otherwise the app may not display the kettle in the list of available ones.

It is important to distinguish between data technologies. Older models could only use Wi-Fi, which is more difficult to set up in the original setting. Newer versions, such as the Mijia Smart Electric Kettle Pro, use a hybrid approach: initial configuration is through Bluetooth Low Energy (BLE), and further management can be done both through the cloud and on-premises.

Preparation of the device and smartphone for pairing

Before you try to turn on the search mode, you need to make sure that the equipment is ready to go. This is a banal, but often ignored stage, where half of all errors occur. Make sure that the kettle is connected to the power grid and the water in it is within the permissible limits (usually between the minimum and maximum mark).

The smartphone also requires preparation. Android and iOS operating systems have different permission requirements for applications that run a smart home. You will need a stable Internet connection on the phone, as the application must download device profiles from the cloud.

• 📱 Install the official Mi Home or Viomi Home app from the App Store or Google Play.
• 📍 Turn on geolocation (GPS) On the phone, it is a mandatory requirement for scanning. BLE-Android.
• 📶 Make sure your phone is connected to a 2.4GHz Wi-Fi network (5GHz networks are often not supported by smart devices).

If you've previously connected a kettle to another account, you need to untie it. In the app, find the device, click three dots in the corner and select "Delete" or "Untie" before you can start the procedure again.

Instructions: how to activate the pairing mode on different models

How Bluetooth activates depends on the specific model of your kettle. Xiaomi engineers use different button combinations for different product lines. Below are instructions for the most common options.

For Mijia Electric Kettle Pro models (often with a temperature-selected display), you need to press and hold two buttons at the same time. Usually, the + and - buttons or the function select button and the on button. Hold them for about 5-7 seconds until the display indicator starts flashing.

For simpler models, such as the Viomi Smart Kettle, the algorithm may be different: often you need to triple-press the on button or hold a single touch button for a long time, in some cases you need to heat the water to a certain temperature and then activate the mode.

⚠️ Warning: Don’t hold the buttons too long (more than 15 seconds) as in some firmwares this can trigger Factory Reset mode by resetting all your custom temperature settings.

Once activated successfully, the Wi-Fi indicator or a special Bluetooth icon on the case should start flashing quickly, which is a signal that the radio module is open to incoming connections.

The process of adding a device to the Mi Home app

Once the kettle has switched to standby mode, move to work with your smartphone. Open the Mi Home app and make sure the right region is selected in the top left corner (usually the country where you are, or "China" if the device is not defined).

Press the + button in the upper right corner to add a new device. The app will trigger an automatic scan. If the kettle is nearby and the pairing mode is active, you will see a pop-up asking you to add a new gadget.

If automatic detection fails, use manual search:

1. In the search bar, type the model name, such as “Kettle” or “Viomi”.
2. Select the appropriate device from the list.
3. Follow the instructions on the screen: confirm that the indicator is flashing, and enter the password from your Wi-Fi network.

💡

Successful connection occurs only when the indicator on the kettle lights up with an even light, and the status "Online" appears in the application.

During the setup process, the application may request a firmware update, and it is strongly recommended to agree to this, as new versions of the software often fix Bluetooth connection stability errors.

Compatibility table and model codes

Not all kettles support Bluetooth. Some budget models run exclusively through Wi-Fi Direct or have no "smart" features at all. To avoid wasting time looking for a non-existent module, check the table below.

Note the app column. Xiaomi's ecosystem is divided: Viomi brand devices often require a separate Viomi Home app, although they can also be displayed in Mi Home if you're properly configured in the region. If you can't find the device, try changing the app.

Common Errors and How to Resolve Them

Even if you do the right thing, you can have a failure, and most of the time, it's not the kettle itself that's the problem, but the settings of the phone or the interference on the air.

If the phone says "Device not found" even though the light flashes, check the Bluetooth list in the phone's system settings. Sometimes the device may be lawnected at the system level but not in the app, then click "Forget the device" in the Bluetooth system menu and try adding it again via Mi Home.

• 📶 Wi-Fi interference: If the router is too close to the kettle, a powerful Wi-Fi signal can "clog" a weak Bluetooth signal when initially set up. 2-3 router.
• 🔋 Energy saving: On some smartphones (especially Xiaomi, Huawei, Samsung), aggressive battery settings can block the Bluetooth scanner.
• 🌍 Region: Make sure the region in the app matches the region of the device.The Chinese version of the kettle is difficult to link to a European account without "dancing with a diamond».

⚠️ Warning: If the kettle emits an error beep (usually a series of short squeaks) during connection, it may mean that there is not enough water inside or, conversely, it has boiled.Empty and re-pour the cold water before trying again.

In rare cases, factory resets help, usually holding the switch for more than 10-15 seconds until the characteristic sound or display changes, and then the device will return to the out-of-the-box state.

Frequently Asked Questions (FAQ)