How to enable wet cleaning on the robot vacuum cleaner Xiaomi

Xiaomi's ecosystem offers a wide range of automation devices, and robot vacuum cleaners are one of the leading places here. Many users purchase models with wet cleaning function, but often face difficulties in initially setting up this mode. Just attaching a tank is not enough - you need to properly configure the software part and physically prepare the device for water.

Turning on the floor washing mode can vary depending on the specific model, whether it is a series of Roborock, Vacuum or Mop. In this article, we will discuss in detail how to activate this feature, adjust the intensity of the water supply and avoid typical errors that can lead to a breakage of the gadget or poor surface cleaning.

Before you get into software settings, make sure you understand how your device works: Some models use a static cloth, others use a vibration platform, and others are able to lift carpets on their own, and understanding these nuances will help you manage the cleaning process more effectively.

Preparation of the device for wet cleaning

The first step is to physically prepare the robot, and you need to remove the standard dry garbage container and replace it with a combined tank with a water tank.

Once the tank is installed, you need to attach a microfiber wipe to the platform, make sure it fits tightly to the surface and doesn't hang around the edges so that the robot doesn't get stuck. Some models require Velcro fixation, others use magnetic attachments or special clamps.

• 💧 Fill the tank with clean room temperature water to mark MAX.
• 🧽 Moisturize the napkin before installation for a faster start to the process.
• 🔒 Close the water supply valve tightly to avoid leakage during installation.
• 🤖 Install the module in the robot, before the characteristic click of the locks.

It is critical to check the sensors before launching, and if the drop sensors or bumper are contaminated, the robot may not properly assess obstacles, especially on dark surfaces or high-pile carpets.

Setting up in the Mi Home app

The main function management is through the Mi Home or Xiaomi Home mobile app. Once you have connected the tank, launch the app and go to the management page of your device. The interface may vary slightly depending on the server region, but the logic remains the same.

In the main menu, select the cleaning mode. Usually there is a switch between Quiet, Standard, Power and Maximum traction. For wet cleaning, it is often recommended to use a standard or quiet mode so that the water can dissolve the contaminants rather than smearing.

Next, look for water level settings, which can be up to four in current models: low, medium, high and adaptive, and the adaptive mode automatically adjusts the water supply depending on the speed of the robot and the type of coating, which is the best choice for mixed floors.

Don’t forget to check your schedule settings. You can program your device to start wet cleaning at certain times when you’re not home to avoid slippery flooring when guests arrive.

Differences in the management of Xiaomi and Roborock models

Xiaomi’s ecosystem includes its own branded devices and products from partners like Roborock or Dreame. The management interface can vary significantly, often causing confusion among users.

In Roborock-branded devices, the water settings are placed in a separate menu called Cleaning Settings, where you can customize the level for each room in detail, a unique feature that allows you to increase the water supply in the kitchen and reduce the water supply in the living room, for example.

Xiaomi Vacuum models often have a simplified interface, where water level selection can be done directly on the home screen or via (long-press) the mode icon, and some versions of the software require manual switching to Mop mode in the drop-down list.

⚠️ Warning: If you don't see the water settings in the app, make sure that the robot has a combined water tank installed. When installing a dust-only tank, the wet cleaning menu can be hidden software.

For models with automatic mop lifting (such as the Pro or Ultra series), the app will have an additional item called "Carpet Raising" activating this feature will cause the robot to lift the platform when it enters the pile so as not to wet it.

Table of compatibility of water regimes and levels

The right water level is directly related to cleaning quality and operating time, too much pressure will leave puddles, and too little will not wash away the stains. Below is a table that helps you navigate the settings for different situations.

Use the maximum level with caution. On some types of laminate, excess moisture can cause the seams to swell. Always test the new mode in an inconspicuous corner of the room.

Use of voice control and scenarios

Smart home owners can control wet cleaning not only through the application, integration with Yandex.Alice, Google Assistant or Siri allows you to start processes with voice, but it is the wet mode that often requires the creation of special scenarios to activate.

In the Mi Home app, go to the Smart tab. Create a new automatic script, select a condition (such as voice command or time) and the Start Cleaning action. In the advanced action settings, select the Wet Clean option and the desired water level.

You can also set up a "Leave the House" scenario, and when the geolocation of the phone shows you've left the radius of the apartment, the robot can automatically start wet cleaning with the maximum water level, so that the floors are dry by the time you arrive.

Maintenance and care of the water supply system

Regular maintenance prolongs the life of the pump and tank. After each wet cleaning, it is recommended to drain the remaining water from the tank. Stagnant water is the ideal environment for bacteria to multiply and produce unpleasant odors.

Once a week, wipe the contacts on the tank and in the robot with dry cloth. Oxidation of the contacts can cause the device to stop seeing the water tank and not turn on the feed mode.

• 🧼 Wash the tank with warm water without using abrasive sponges.
• 💨 Let the system dry completely before long storage.
• 🔍 Periodically check the hole for water outlet for blockages.

If you notice the floor remains dry even at high settings, the nozzle may have clogged. Carefully clean it with a soft brush or blow it out. Do not use needles or sharp objects to avoid damaging the calibrated hole.

Frequently Asked Questions (FAQ)

💡

Use distilled water to refill the tank if you have very hard water, which will prevent lime plaque from forming inside the thin tubes of the feed system, which will significantly extend the life of the pump.

💡

The secret to good wet cleaning is to change water regularly and clean the tank, not just to adjust the levels in the app.

⚠️ Warning: Do not leave a robot with a full tank of water for storage for more than 24 hours. Water can evaporate through micro holes or accidentally get onto the electronic board at temperature drops, which will lead to corrosion.