Modern health devices are becoming an integral part of the lives of many people who monitor their weight and physical condition. Xiaomi smart scales have proven to be a reliable and accurate tool for home use, allowing you to track not only body weight, but also percentage of fat, water and muscle mass. However, after purchase, users often face the question of how to properly initialize the device and link it to a smartphone for a full ecosystem.
The initial setup process can seem confusing due to the Bluetooth protocol and software requirements. Xiaomi Mi Body Composition Scale 2 (XMTZC05HM model) requires a certain sequence of actions to ensure that data is transmitted correctly and not lost. Ignoring basic connection rules often leads to the gadget not being determined by the phone or displays erroneous metrics.
In this article, we will take a closer look at all the stages of preparation, installation of software and pairing of devices, learn about the nuances of working with Mi Fit and Zepp Life applications, which are the main platforms for weight management.
Device preparation and system requirements
Before starting the synchronization process, you need to make sure that the device itself is ready to work. Xiaomi Scale 2 comes in a compact package, where the main power element is four AAA-format finger batteries. It is important to use quality power cells, since low-voltage analogs may not provide enough power for the stable operation of the Bluetooth module, which will lead to permanent connection breaks.
Besides the hardware, the software environment of your smartphone is critical. The scales require certain versions of the operating systems: Android 4.4 and higher or iOS 9.0 and higher to work properly. You also need to make sure that geolocation services are enabled on the phone, since modern versions of Android require that third-party apps scan Bluetooth devices.
⚠️ Warning: Do not remove the insulation film from the batteries inside the scales before setting up. If you did this in advance and the device turned on, it may go into sleep mode, and it will be more difficult to find it when scanning.
It's also worth noting that scales support connecting up to 10 different user profiles, but the initial setup is always tied to one main account.The regional settings of your Mi Account can affect the availability of some features, so it's a good idea to choose a region that matches your actual location or the region of your device purchase.
Selection and installation of the required application
Xiaomi’s ecosystem uses several applications for wearable electronics and smart scales. Historically, Mi Fit has long been the main application, but in 2021 it was renamed Zepp Life. This app is recommended for Xiaomi Scale 2, as it provides the most complete compatibility and regular updates to body composition algorithms.
Download the application should be exclusively from official stores: Google Play Market for Android or App Store for iOS. APK-files can lead to malware installation or unstable operation of the program. After installation, you need to register an account or log in to an existing one using a phone number, email or social media accounts.
There is also the Mi Home app, which is primarily designed to control the smart home. While some scale models can be added there, XMTZC05HM functionality can be limited or require manual binding through the China region. For most users, the optimal choice is a bunch of scales and the Zepp Life app, which automatically recognizes the device when connected correctly.
💡
When registering with Zepp Life, please provide real data (height, age, gender), as the accuracy of calculation indicators, such as fat percentage and visceral level, depends on them.
Step-by-step instructions for connecting the weights
The pairing process requires care, because the scales have no input screen and are completely dependent on the smartphone. The first step is to insert the batteries into the compartment on the bottom panel of the device, and then all the segments should briefly light up on the scale display, after which the value of "0.00 kg" or "0.00 lb" will appear.
Next, open the Zepp Life app on your smartphone. Make sure Bluetooth is on. Don't try to (match) scales through the standard Bluetooth menu in your phone settings, which is a common mistake. The pairing should be done strictly within the app. Go to Profile and click Add Device, then select Libra from the list of available options.
☑️ Checklist of connection
When the app starts searching, stand with one foot on the scale to activate pairing mode (the display should catch fire). The list of available devices should show a model code, such as XMTZC05HM. Click on it to start the process. At this point, you may need to confirm the action on the smartphone screen.
⚠️ Warning: During the search and connection process, don’t move far from the scales and keep your phone no more than a distance away. 1-2 Interrupting the Bluetooth signal at this point can cause a timeout error.
Once you've successfully connected the scales, they'll be asked to calibrate, stand on them evenly, spread the weight evenly between your feet, the device will measure your weight and send it to the app, and if it's successful, you'll see a profile card of the device with your current battery charge and the latest measurements.
Setting up user profiles and synchronization
One of the key features of Xiaomi Scale 2 is the ability to recognize up to 10 users. After the initial connection, the scales are assigned to the Guest profile or the main user whose weight was recorded during the setup. To add family members, each of them must install the Zepp Life app on their phone and link the scales to their account separately, or use the Guest Mode feature within the same account.
However, the most accurate way to work is to create separate profiles, and scales remember the last 10 dimensions and relate the new weight to the story, and if you're on a scale and they've shown your past score, the identification is successful, and it's important that the weighting is done at about the same time of day and with or without the same clothes to minimize the errors.
| Parameter | Description | Impact on calculations |
|---|---|---|
| Growth | Manually entered in profile | Critical for calculating BMI and body composition |
| Age. | Manually entered in profile | Affects Basic Metabolism (BMR) |
| Paul | Selected at registration | Determines the percentage of fat and muscles |
| Figure type | Configuration in the app | Adjusts weight targets |
The data synchronization happens automatically when you open the app, if the scales are nearby. If you weighed and the phone was far away, the data will be stored in the weight memory (up to 30 weighings) and transmitted at the next connection. The measurement history is stored in the cloud, which allows you to track the dynamics even when you change your smartphone.
What to do if the scales confuse users?
Interpretation of indicators and work with data
Once connected, Xiaomi Scale 2 will provide advanced analytics, including weight, body mass index (BMI), body fat percentage, muscle mass percentage, water percentage, visceral fat and bone mass, which are calculated using bioimpedance analysis to send a weak, imperceptible electric current through the feet.
To get the right results, it's important to understand how these metrics work, for example, visceral fat is the fat that surrounds the internal organs, and high levels are a marker of health risk. Water levels can fluctuate depending on the time of day and hydration, so don't panic when this value jumps dramatically throughout the day.
Zepp Life charts dynamics to measure the effectiveness of diet or exercise. You can set weight goals and the app will show progress as a percentage. Data can be exported or synchronized with other health services, such as Google Fit or Apple Health, through settings in the app profile.
⚠️ Attention: Bioimpedance analysis has contraindications: People with pacemakers or other implanted electronic devices are not recommended to use the body composition measurement function (although conventional weighing is safe).
Remember, electronics are sensitive to foot conditions. Dry, rough skin can increase resistance and distort results. To improve conductivity, you can slightly moisten your feet before you stand on the scale, but not make them wet so that water does not get inside the device.
Problem Solving and Troubleshooting
Even if all the instructions are followed, there can be technical difficulties: the most common problem is that the scales do not turn on or the display goes out immediately after turning on; 90% of the cases are due to poor battery quality or oxidation of contacts; try replacing the batteries with alkaline from proven brands and wipe the contacts with a cotton swab.
The second common situation is that the phone doesn't see the scales when searching. Make sure the scales aren't connected to another phone right now. Xiaomi Scale 2 can only pair with one active device at the time of setting up. Also check the app's permissions: Bluetooth, geolocation and notifications should be allowed in the Android/iOS settings for Zepp Life.
💡
If the scales show "LO", it means battery discharge, if "ERR" - exceeded the maximum weight (150 kg) or the stability of the platform is disturbed.
Sometimes users encounter a “Device is busy” error when trying to connect, which is solved by completely restarting Bluetooth on the phone (turn off-on) or restarting the application itself, in extreme cases, removing the device from the Bluetooth list in the system and re-binding through the application with a full reset of the scales (removing the batteries for 10 seconds).
If the scales show wildly different results when weighed again (a difference of more than 0.5 kg), check the surface. The scales should stand on a hard, flat floor (tile, laminate, linoleum). A carpet, even with a short pile, or an inclined floor will make measurements of bioimpedance impossible and lead to large errors.