How to connect Xiaomi Mi Smart Antibacterial Humidifier to Mi Home: a complete guide with photos and tips

Why is Xiaomi Mi Smart Antibacterial Humidifier not connected to Mi Home for the first time?

Xiaomi Mi Smart Antibacterial Humidifier (JSQ01ZM and JSQ02ZM models) is one of the most popular smart home devices from Xiaomi, but its connection to the Mi Home application often raises questions. Problems arise due to the peculiarities of the Bluetooth Mesh protocol, regional limitations of Xiaomi servers and unobvious steps in setting up. For example, many users do not know that to successfully synchronize you need to manually reset the device before the first connection, and in some cases even change the account region in Mi Home.

In this article, you will find step-by-step instructions with photos, a breakdown of typical errors (such as code 10008 or endless search of the device), as well as tips on optimal settings of the humidifier after connecting. We tested the process on firmware 2023-2026 and took into account all the nuances, including working with Mi Home and Xiaomi Home (the new name of the application in some regions).

Preparation before connection: 5 mandatory steps

Before you start synchronizing, make sure that all the prerequisites are met. Missing at least one point can lead to a connection failure or unstable operation of the device in the future.

• 📱 Update the Mi Home app to the latest version (at the time of writing, 6.5.400 is up to date for Android and 6.5.300 for iOS). Older versions do not support the Bluetooth Mesh protocol used in the humidifier.
• 🌍 Check the region of your Mi Home account. The humidifier is officially sold in China Mainland, so if your account is linked to another region (e.g. Russia or Europe), you may need to change to China (instruction below).
• 🔋 Charge the device to at least 30%. At low charge, the humidifier can interrupt the connection process.
• 📶 Connect your phone to a 2.4 GHz network. The humidifier doesn't work with 5 GHz networks! SSID For both bands, divide the networks in the router settings.
• 🔄 Reset the humidifier to factory settings. Even if the device is new, the reset ensures that there is no junk data from previous connection attempts.

Pay special attention to the area of your account, if your account is registered in Russia or Europe, the humidifier may not appear in the list of available devices.

1. Open Mi Home, go to Profile → Settings → Region.
2. Choose China Mainland.
3. Restart the application and re-search the device.

⚠️ Warning: Changing your region will result in loss of access to previously connected devices if they do not support China Mainland. Before changing region, save a list of devices or back up to Settings → Account. → Backup.

Step-by-step: how to connect the humidifier to Mi Home

Follow the instructions in strict order. If there is an error at some point, don't go on, go back to the "Typical Error Solutions" section below.

Step 1: Resetting the humidifier to factory settings

On the back of the device, find the reset button (usually hidden under a small hole labeled RESET). Use a paper clip or toothpick to:

1. Press and hold the RESET button for 5-7 seconds until the indicator flashes yellow.
2. The humidifier will sound and reset.

If the indicator does not flash, repeat the procedure or check that the device is on the network.

Step 2: Start the Connection Process in Mi Home

1. Open Mi Home and press + → Add the device.
2. In the search bar, enter a humidifier or humidifier.
3. Select Xiaomi Mi Smart Antibacterial Humidifier (JSQ01ZM or JSQ02ZM model).
4. Confirm the device's addition.

Step 3: Connect to Wi-Fi

The application will offer to connect to the temporary network of the humidifier (Xiaomi_XXXX). Do it, then:

1. Return to Mi Home (the app will automatically detect the device).
2. Select your 2.4GHz home network and enter your password.
3. Wait until the process is completed (it can take up to 2 minutes).

Step 4: Set up the device

After successful connection:

• 📛 Give the humidifier a name (for example, a humidifier in the bedroom).
• 🏠 Select a room (this will help with control through voice assistants).
• ⚙️ Set up the basic parameters (humidity, mode of operation).

Optimal settings of the humidifier after connecting

Just plugging in a humidifier isn't enough -- you need to set it up properly to avoid overhydration, scale formation, or rapid membrane wear, and here are the recommended parameters for different scenarios:

A critical nuance: if you use tap water, turn on the antibacterial regimen necessarily! Otherwise, biofilm will accumulate on the membrane and in the tank, which not only shortens the life of the device, but can also become a source of unpleasant odor.

💡

Use distilled or filtered water to extend the life of the membrane, and if you can't, add 1-2 tablespoons of vinegar to the tank per 1 liter of water to reduce stiffness and prevent scale formation.

Integration with voice assistants and automation

The connected humidifier can be controlled by voice via Alice (Yandex), Google Assistant or Siri (via HomeKit if you use Home Assistant).

Setup for Alice (Yandex)

1. Open the Yandex app and go to Devices → Add the device.
2. Choose Xiaomi and log in through your Mi Account.
3. Allow access to the humidifier.
4. Now you can use commands like: Alice, turn on the humidifier in the bedroom at 50% Alice, turn off the humidifier in 2 hours.

Automation through Mi Home

You can create automation scenarios in the Mi Home app, for example:

• 🌙 Night mode: Turn on the humidifier at 45% humidity from 22:00 to 7:00.
• 🏠 No-Home mode: Disable the device if all family members have left the house (by geolocation).
• 🌡️ Link to thermometer: Turn on the humidifier if the temperature is above 24°C and humidity below 40%.

⚠️ Note: When setting up automation, avoid simultaneously controlling the humidifier through multiple applications (e.g. Mi Home). + Yandex + This can lead to team conflicts and unstable operation of the device. Choose one main way to control the device.

Solving Typical Errors When Connecting

Even with the correct following of the instructions, errors can occur, and below are the most common problems and concrete solutions that have been tested in practice.

Error 10008: "I failed to connect to the device"

Causes and solutions:

• 📶 Weak Wi-Fi signal: Move the humidifier closer to the router (maximum 5 meters) or use a repeater.
• 🔄 Conflict with other devices: Disconnect other Xiaomi smart gadgets (lamps, sensors) for connection time).
• 🛠️ Firmware failure: Update the humidifier through Settings → About the device → Update of the software (if it has already been connected before).

Humidifier not found on device list

Possible causes:

• 🌐 Incorrect Region: Change your account region to China Mainland (see Preparation section").
• 📱 Outdated Mi Home: Update the app or install an alternative version (e.g. Xiaomi Home).
• 🔌 Power problems: Connect the humidifier to another power source (do not use it) USB-hub!).

The humidifier is connected but does not respond to commands

This is most often related to:

• 📵 Wi-Fi loss: Restart your router and check if your network password has changed.
• 🔄 Device freeze: Turn off the humidifier from the socket for 30 seconds, then turn it on again.
• 📱 Mi Home crash: Remove the device from the app and connect again.

💡

If the humidifier is plugged in but does not display current humidity, check if the humidity sensor (located on the back of the device) is closed.

Frequent questions about Xiaomi Mi Smart Antibacterial Humidifier