Xiaomi Smart Humidifier 2: How to connect to Mi Home in 5 minutes – instructions with pictures and tips

Xiaomi Smart Humidifier 2 is not just a household appliance, but a full-fledged device of the Xiaomi smart home ecosystem. It is able to automatically maintain optimal humidity levels, integrate with other brand gadgets and be voice-controlled through Alice or Google Assistant. However, many users face difficulties during the first connection to the Mi Home app. Why is the device not online? How to choose the right region in the settings? What to do if the indicator flashes red? This article will answer all the questions from unpacking the box to fine-tuning the work schedule.

We'll take a step-by-step look at the latest firmware updates from 2026, and we'll also uncover hidden humidifier features that aren't mentioned in the official manual, like how to activate the "Kid's Room" mode or why it's important to update the device software immediately after you buy it. If you've tried to plug in the appliance and you've got an error, there's a section at the end of this article that addresses 90 percent of typical problems.

Before you start, make sure you have:

• 📱 Smartphone with Mi Home app installed (version at least 6.5.4.
• 🔌 220V socket near the humidifier installation (short power cable - 1.2 m).
• 📶 Stable Wi-Fi connection at 2.4 GHz (device does not support 5 GHz!).
• 💧 Distilled or filtered water (use of tap water reduces the life of the membrane).

1. Preparation of the humidifier for the first inclusion

Start by unpacking the device and checking the equipment.

• 📦 Xiaomi Smart Humidifier 2 (white or black).
• 🔌 Power adapter with cable (power) 24W, exit 12V 2A).
• 📄 Brief instruction in Chinese/English (there is no Russian version, but you don’t need it – follow our guide).
• 🔧 Removable filter (already installed inside the tank).

Before the first inclusion, perform the mandatory actions:

1. Remove the protective film from the case and display (it is easy to miss on the back!).
2. Rinse the water tank with warm water and soap, then rinse it. This will remove the dust from the production.
3. Set the tank on the base before clicking - it should sit tightly, without backlashes.
4. Pour the water to the maximum level (4.5 liters). Do not use hot water - this will damage the ultrasonic membrane.

⚠️ Warning: If a red light is on after pouring water, check if the tank lid is tightly closed. Even a small gap will cause an error. E1 (no water).

Now, connect the power adapter to the humidifier and insert the plug into the socket, the device should emit a short beep, and the Mi logo will appear on the display.

• Check that the socket is working (plug in another device).
• Make sure the adapter is plugged into the connector on the back to the stop.
• If the indicator flashes red, reset the device by holding the power button for 10 seconds.

2. Installation and configuration of the Mi Home app

The Mi Home app is the central control panel for all Xiaomi devices, and without it, the humidifier will only work manually, with no remote control.

Step 1 Download and install the application

• For Android: The minimum version of the OS is 5.0, you need access to location and storage.
• For iOS: Supported iPhone with iOS 11 and later.

Step 2: Create or sign in to a Xiaomi account

If you already have an account (for example, for a Redmi smartphone or a smartphone). POCO), If you don't, register:

1. Open the application and click Register.
2. Please provide a valid email or phone number.
3. Confirm registration via SMS or letter.
4. Create a strong password (save it in the password manager!).

Step 3: Choose the right region

This is a critical step, because if you choose the wrong region, the humidifier may not connect or work with errors.

1. Go to profile (the icon of the person in the lower right corner).
2. Click on the line with the country name (China may be the default).
3. Choose Russia (or Europe if Russia is not on the list).
4. Save the changes and restart the application.

⚠️ Warning: If you used to connect Xiaomi devices in China and now want to use Russia, all old gadgets will have to be reconnected!

Step 4: Update the app to the latest version

Go to Settings. → About the annex → Verify updates. Current version at 2026 - 6.6.1+. Older versions may not support new devices.

3. Step-by-step connection of the humidifier to the Mi Home

Now, the most important thing is that the humidifier and the app are bundled together, and the whole process takes no more than 5 minutes if you follow the instructions:

Step 1. Activate the pairing mode on the humidifier

• Make sure the device is plugged in and the Mi logo is on display.
• Press and hold the power button (round button on the panel) for 5 seconds until you hear a double beep.
• The indicator will start flashing orange, which means that the device is ready to connect.

Step 2. Add the device to Mi Home

1. Open the app and press. + (plus-mark in upper right corner).
2. Select the category Smart Home → Humidifier.
3. In the list of models, find Xiaomi Smart Humidifier 2 (if not, update the app!).
4. Press Add Device.

Step 3. Connect to Wi-Fi

The app will suggest you select a Wi-Fi network.

• 📶 The humidifier only supports 2.4 GHz networks. If your router is running on 5 GHz, temporarily disable it or split the networks in the router settings.
• 🔒 The network password should contain only Latin letters and numbers (Cyrillic is not supported!).
• 🚫 Do not use guest networks or captive portal networks (as in hotels).

Step 4: Wait for the connection to be completed

Once you've selected the network, the humidifier will beep, and the app will have a progress bar, which can take up to 2 minutes. Don't interrupt it!

• If progress is 99% down, restart the app.
• If you have an error "I failed to connect" - check the password from Wi-Fi.

Now the humidifier will appear in the Mi Home main menu with the current humidity level, and the device will display a blue indicator, which means that the connection with the Xiaomi servers is established.

💡

If the humidifier doesn’t connect to Wi-Fi, try temporarily disabling the firewall or antivirus on your smartphone – they can block the connection to Xiaomi servers.

4.Urgent settings after connection

Now that the device is online, you can customize it to your needs.

Selection of operating conditions

In the Mi Home app, open the humidifier card and go to Settings → Mode. 3 options available:

• 🌫️ Auto - the device itself maintains a given level of humidity (recommended).
• 💧 Manual – you manually set the intensity of evaporation (1-3 level).
• 🌙 Night – quiet mode with minimal display illumination.

Installation of target humidity

The optimal level for health is 40-60%, to change the meaning:

1. Click on the current humidity value on the home screen of the device card.
2. Move the slider on a scale of 30% to 80%.
3. Save the changes – the humidifier will automatically turn on/off to maintain a set level.

Scheduling adjustments

A useful feature if you want the humidifier to work only at certain times (e.g. at night)

1. Go to Settings. → Timer.
2. Click Add Schedule.
3. Select the days of the week and specify the time of on/off.
4. Activate the Repeat option if you need to start your schedule daily.

4. Connecting to voice assistants

The humidifier is compatible with Alice (Yandex), Google Assistant and Siri (via HomeKit).

• For Alice: Say “Alice, find my devices” and follow the instructions in the Yandex app.
• For Google: Connect Xiaomi account to Google Home via Settings → Smart home.

Examples of voice commands:

• "Alice, turn the humidifier on as high as possible."
• "OK, Google, set the humidity level at 50% in the nursery."

5. Firmware update and hidden features

Many users don't know that Xiaomi Smart Humidifier 2 can be upgraded like a smartphone. Regular updates add new features and fix bugs.

1. Open the device card in Mi Home.
2. Go to Settings. → About the device.
3. Click Check for updates.

Update firmware for June 2026 is 2.5.8 If available:

• Connect the humidifier to the power supply and make sure that the water level is not lower than 20%.
• Click Update and wait until it is completed (the device will reboot automatically).
• Do not turn off power during the process!

Hidden functions after the update:

• 🌡️ Automatic calibration of the sensor - the humidifier itself adjusts the humidity readings every 24 hours.
• 🔄 Eco mode: reduces water consumption by 15% without loss of efficiency.
• 🛡️ Mold protection – the device reminds you to clean every 7 days.

⚠️ Warning: If the humidifier starts to work louder or the smell of ozone appears after the upgrade, reset the settings (hold the power button for 15 seconds.

💡

To keep the humidifier lasting longer, wash the tank once a week with a weak solution of citric acid (1 tsp. per 1 liter of water), which will remove lime plaque and prevent the reproduction of bacteria.

Typical errors and their solutions

Even with the right connection, there can be failures, and let's look at the most common problems and ways to fix them:

Mistake. E1 (no water)

• 🔹 Check the water level in the tank (even if it seems full, an air bubble may have formed).
• 🔹 Remove and install the tank again before clicking.
• 🔹 Wipe the contacts at the bottom of the tank and the base of the device with a dry cloth.

Mistake. E2 (flooding)

• 🔹 Pour the water out of the tank and pour again, without exceeding the maximum mark.
• 🔹 Check if something is blocking the float sensor inside the tank.

The humidifier does not respond to commands from Mi Home

• 🔹 Restart the device (turn off power for 30 seconds).
• 🔹 Check Wi-Fi connection – the indicator on the device should burn blue.
• 🔹 Remove the device from the application and add again.

The device makes a lot of noise.

• 🔹 Make sure the tank is installed correctly – vibration may occur due to a loose fit.
• 🔹 Check if a foreign object hit the fan (quite shake the device).
• 🔹 Switch to night mode - it's quieter by 30%.

Mi Home shows offline device

• 🔹 Check if the Wi-Fi password has changed.
• 🔹 Turn it off. VPN Proxies on your smartphone – they can block communication with Xiaomi servers.
• 🔹 Reconnect the humidifier to the network in the router settings (find it by MAC-address).

7.Integration with other Xiaomi devices

Xiaomi Smart Humidifier 2 can work in conjunction with other gadgets of the ecosystem, creating smart scenarios.

• 🌡️ Automatic on when humidity drops below 40% (data from the Xiaomi Temperature and Humidity Sensor).
• 🚪 Disable when opening a window (if you have a Xiaomi Open sensor) Door/Window Sensor).
• 💤 Night mode on the signal from Xiaomi Bedside Lamp (when the lights are turned off).

How to set up the script:

1. Open Mi Home and go to Automation tab.
2. Press Add Add Add. → Customized script.
3. Select a condition (e.g., "Humidity < 40%") and an action ("Enable humidifier").
4. Save the script and activate it.

You can also connect the humidifier to Google Home or Apple HomeKit via Mi Home:

• At Mi Home, go to Profile → Settings → Smart home and automation.
• Select the platform you want and follow the instructions on the screen.

💡

If the humidifier doesn’t show up in Google Home, try removing it from Mi Home first, then adding it again, and then syncing with Google.

FAQ: Answers to Frequent Questions