The modern kitchen is increasingly filled with devices that take on routine tasks, and the Xiaomi Mi Pro is a prime example of this evolution of home appliances. It is not just a water heater, but a sophisticated electronic device that can maintain accurate temperature, work on a schedule and be controlled by voice. For many users, the transition from a conventional electric kettle to an IoT device is a real discovery in the world of comfort.
The main challenge faced by owners immediately after purchase is to initially set up a Wi-Fi connection and link to the smart home ecosystem. Without this step, the device remains a conventional heater, losing up to 80% of its functionality. In this article, we will examine in detail all aspects of operation, from installing a mobile application to fine-tuning temperature regimes for different types of tea and coffee.
It's important to understand that the Xiaomi Mi Smart Kettle Pro (ZNMQ1) is different from previous versions in the presence of a display and the ability to accurately adjust the heat in increments of one degree. This is critical for connoisseurs of puerh or green tea, where the water temperature directly affects the taste of the drink. Let's figure out how to make this gadget work exactly as you want.
Preparation for the first launch and connection to the network
Before you first turn the appliance into the socket, you need to perform several preparatory actions that will ensure long service of the heating element. Manufacturers recommend a procedure of "first boiling" without the lid to remove possible residues of the production lubricant or dust from the inside of the bulb.
To control the kettle, you will need a smartphone with an Android or iOS operating system and an installed Mi Home app (or Xiaomi Home). Make sure that geolocation and Bluetooth are on the phone, as modern communication protocols often use them to quickly detect new devices within range. It is also critical that your smartphone and kettle are on the same 2.4 GHz Wi-Fi network.
⚠️ Note: Xiaomi smart devices generally do not support 5GHz Wi-Fi networks. If your router broadcasts one network with a common name for both bands, try temporarily splitting them in the router's settings or moving the phone away from the router when paired so it switches to 2.4GHz.
The process of adding a device to an app is usually automatic: open Mi Home, press the "+" button in the upper right corner, and the system will find a new gadget. If the automatic search does not work, select the category "Kitchen" or search the model "Mi Smart Kettle Pro." After selecting the device, click "Add" and follow the instructions on the screen, entering the password from your Wi-Fi network.
☑️ Checking before connection
Successful connectivity will be confirmed by the kettle beep and its icon appearing in the list of devices of the application, from which point you get full access to remote control and advanced settings, which are not available through physical buttons on the base of the device.
Mi Home application interface and basic functions
Once you've successfully synchronized, you'll see a master control menu that's much richer than the button controls, and the interface is divided into several logical blocks that allow you to monitor the current state of the water and set the heating parameters, with the current temperature indicator and the quick start button taking center stage.
One of the key features is that you can choose the exact temperature of the heating. Unlike regular kettles, where there is only boiling, here you can set a value of 40 to 100 degrees Celsius in 1 degree increments, which is especially useful for preparing baby food or specific teas that require delicate handling.
The secret settings of the region
The app also has a temperature maintenance mode, so you can set a temperature target and the time the kettle will heat the water if it cools below a predetermined threshold, eliminating the need to boil the water again every 20 minutes.
- 🌡️ Precise heating: setting the temperature in step 1°C for perfect brewing.
- ⏱️ Delayed Start Timer: The ability to program the turn on for a specific time.
- 🔊 Sound control: In the application, you can turn off the sound signals or select their volume.
- 📊 Statistics: View the history of boiling and electricity consumption (depending on the firmware version).
Don't ignore the notification settings, you can set up notifications on your phone when the boiling has finished or the water has cooled, so you don't have to keep your eyes on the device and do your own thing while the smart kettle is running autonomously.
Control through the database: buttons and display
While the app provides maximum control, the kettle base also features a functional interface for quick access, with a digital display and touch button on the front, and a brief click on the button to turn on the temperature maintenance mode or trigger heating to the last selected temperature.
To change the temperature without a smartphone, you use a long press and rotation method (if the model supports a rotary selector) or a series of short presses. The Pro often uses the rotation of the base itself or the sensor to select degrees. When you rotate, the display will show changing temperatures.
| Action. | Device response | Indication |
|---|---|---|
| Short press. | Start/Stop Heating | Blinking the display |
| Long press (3 seconds) | Entering the temperature setting mode | The numbers are starting to blink. |
| Spinning (if any) | Temperature change | Change of numbers on the display |
| Double-push | Switching between modes (Heating/maintenance) | Changing the regime icon |
It is important to note that some settings, such as turning off sound or resetting to factory settings, are only available through button combinations. For example, holding a button for 10 seconds can initiate a Wi-Fi reset, which is useful when changing a router.
💡
Use the Keep Warm mode at night, setting 45-50 degrees. In the morning, you will always have warm water for washing or the first glass of water, without wasting time waiting.
Automation scenarios and voice control
The real power of Xiaomi's ecosystem is revealed by creating automation scenarios: you can link the kettle to other smart home devices or use geolocation, for example, you can create a scenario: "If the smartwatch has detected the owner's awakening, turn on the kettle 90 degrees."
Voice control is implemented through the assistants Google Assistant, Amazon Alexa or Yandex Alice (if you have the appropriate integration through the Mi Home skill). To activate, you need to link the Mi Home account with the voice assistant account in their respective applications.
The scenarios can be complex and combined. You can set the condition, "If the room temperature has dropped below 20 degrees And it's morning, turn on the kettle," which makes the device part of a full-fledged climate control and comfort system.
However, it is worth remembering delays: voice commands and complex scenarios require a signal to pass through a cloud server. If the Internet connection is unstable, the command may take several seconds or not execute at all, whereas control over a local network (if supported by a gateway) works faster.
Boiling modes for different drinks
The right water temperature is the key to taste. Black tea and coffee require a steep boiling water (95-100°C) to be extracted as fully as possible. Green tea, especially delicate varieties like Longjin, becomes bitter and loses flavor when brewed with boiling water; the optimal temperature for it is 70-80°C.
Baby food requires special sterility and precision. The water must be boiled (100°C) to kill bacteria, then cooled to 40-45°C to mix with the mixture. Xiaomi's smart kettle allows you to set the boil + cool mode, automatically bringing the water to the desired feeding temperature.
- 🍵 Green tea: 70-80°C (preserves vitamins and delicate taste).
- ☕ Coffee/Black tea: 95-100°C (maximum extraction).
- 🍼 Infant formula: 40-45°C (comfortable for the child).
- 🍯 Honey and lemon: no higher than 60°C (preserves useful properties).
Using modes (if they're in firmware) makes life easier, so you just pick a green tea icon, and the device heats the water up to 80 degrees, so you don't have to remember the optimal values every time.
⚠️ Warning: Do not pour cold tap water into the kettle immediately after boiling if the case is still hot.A sharp temperature drop can damage the glass bulb or cause cracks in the heating element due to heat shock.
Maintenance, cleaning and troubleshooting
Like any water-contact device, the Xiaomi Mi Kettle Pro is prone to scale, and its rate of occurrence depends on the hardness of the water in your area, and regular cleaning is necessary not only for aesthetics, but also to maintain the heating rate and efficiency of the thermal power plant.
Use citric acid or special scale remedies to clean the flask. Pour the solution into the kettle, boil it and leave it for 15-20 minutes. Then rinse the flask thoroughly several times. Mechanical cleaning with sponges with abrasive is prohibited, as you can damage the coating of the heating disc.
If the kettle has stopped responding to commands or displays an error (such as a flashing indicator), try rebooting. disconnect the device from the network for 10 seconds and turn it on again. If there is a problem with Wi-Fi, reset the network settings through the app or a combination of buttons.
Wi-Fi reset sequence:
1.Make sure the kettle is on.
2. Press and hold the control button for 10-15 seconds.
3. Wait for the beep or flashing of the Wi-Fi indicator.
4. Re-add the device in the Mi Home app.💡
Regular decalcination (every 1-2 months) prolongs the service life of the kettle by 30-40% and prevents the appearance of an extraneous taste in the water.
If you have an E1, E2 or similar code on your display, refer to the instructions. Most often they indicate running without water (dry) or overheating. Let the device cool down, pour water and try turning it on again.