How to use the Xiaomi Mi Robot Vacuum Mop Essential white: the complete guide

Xiaomi Mi Robot Vacuum Mop Essential

Mi Home

This article will help you understand everything from unpacking and device preparation to the intricacies of care for accessories, and we will take a detailed look at how the LDS navigation system works, what cleaning modes are available, and why sometimes the robot is lost in space, and you will also learn how to extend the life of the battery and avoid breakdowns in operation.

If you have just purchased Mi Robot Vacuum Mop Essential or are planning to buy it, save this instruction bookmark – it will come in handy not only for the first run, but also for solving possible problems in the future.

Packaging and equipment: what should be in the box

Before first turning on the Xiaomi robot vacuum cleaner, it is important to make sure all components are in place.The standard white Mi Robot Vacuum Mop Essential trim includes:

• 🤖 The robot vacuum cleaner itself with the main filter and side brushes installed
• 🔋 Charging station (dock station) with a power supply unit
• 🧹 Water tank with detergent module (already installed inside the device)
• 🔄 Spare. HEPA-filter (usually in a separate package)
• 📄 Short instructions in several languages (including Russian)
• 🔧 Tool for cleaning the main brush (plastic hook)

Noticing that in some regions, the kit may include an additional set of wet wipes or restrictive magnetic tapes (bought separately).

Also check the integrity of the package, and if there are dents or autopsy marks on the box, it may indicate that the device may be damaged during transportation, in which case it is better to refuse the purchase or immediately test the robot for performance.

💡

If there is no spare in the set HEPA-Filters, order them in advance – Xiaomi’s original filters 3-6 months with intensive use.

Preparation for the first launch: installation of accessories and charging

Before you turn on the robot, you need to properly install all the removable elements. Start with the main brush: it is attached to the bottom of the device with latches. Make sure that the brush rotates freely, without jamming. Then check the side brushes - they must be fixed before clicking.

Pay special attention to the water tank:

1. Remove the tank cover (it is located on top of the robot).
2. Pour clean water to the MAX mark (do not use detergents!).
3. Install a washing module (fabric nozzle) - it should fit tightly to the bottom of the tank.
4. Close the lid before you click.

Now, connect the dock to the grid and set it on a flat surface against the wall, leave 0.5 meters of free space on each side and 1.5 meters in front, which is necessary to ensure that the robot returns to base without any problems, and don't put the station on the carpet, which can interfere with charging.

The first charge should last at least 4-5 hours, even if the indicator is 100%, this is necessary to calibrate the battery, while charging on the robot will flash a white indicator, and when completed it will turn blue.

Connect to the Mi Home app and set up Wi-Fi

To fully manage the Xiaomi Mi Robot Vacuum Mop Essential, you need to connect it to the Mi Home app (available for Android and iOS). Download the app from the official store and register (or log in if you already have an account).

Connection process:

1. Turn on the robot with a long press on the power button (3 seconds).
2. In the Mi Home app, click + → Adding Device → Household Care → Robot vacuum cleaner.
3. Select the Mi Robot Vacuum Mop Essential from the list.
4. Hold the phone to the robot and it will appear on the screen. QR-scan.
5. Connect the robot to your Wi-Fi network (only 2.4 GHz! 5 GHz networks are not supported).
6. Wait until the synchronization is complete (it can take up to 2 minutes).

If the robot is not connected to Wi-Fi, check:

• 📶 Correctness of password entry (registrar matters!).
• 🔄 Distance to the router - the device should be no more than 5 meters.
• 🔒 Absence of special symbols in the network name (for example, #, $, gaps).

Once the robot is successfully connected, it will automatically update the firmware (if a new version is available). Do not interrupt the update process, which can cause a navigation system to crash. 5-10 minute.

Creating a room map and setting up cleaning areas

The first launch of Xiaomi's robot vacuum cleaner always starts with mapping the room. Turn on the device and select Cleanup mode in the app. The robot will slowly circle the room, scanning the space with a laser rangefinder (LDS), a process that can take anywhere from 10 to 30 minutes depending on the area.

During mapping:

• 🚪 Close all doors so that the robot does not leave the room.
• 🪑 Remove small objects from the floor (wires, toys, shoes).
• 🌓 Avoid direct sunlight – it can interfere with the laser sensor.

Once you create the map, the Mi Home app will show you an interactive diagram of your home.

1. Divide into zones: click Edit the map → Add the zone and circle the desired areas.
2. Set virtual walls: limit the robot’s access to certain areas (such as a baby cot).
3. Set up a schedule: Specify the days and times of automatic cleaning for each zone.

Note that if the robot loses the map after moving the dock, you'll have to re-scan the room, and to avoid that, don't change the location of the base unnecessarily.

Remove the wires from the floor |Close the doors to other rooms |Close the doors to other rooms |Current enough light (but no direct sunlight) |Charge the robot to 100% |Close the dock on a flat surface-->

Cleaning regimes and their features

Xiaomi Mi Robot Vacuum Mop Essential offers 4 basic cleaning modes that vary in intensity and resource consumption, which can be selected both in the application and using a physical button on the robot body.

For wet cleaning, 3 water supply levels are available:

• 💧 Low - for laminate and parquet (minimum moisture).
• 💦 Medium - for tiles and linoleum.
• 🌊 High - for persistent contaminants (use cautiously on wooden coatings!).

Tip: If the robot leaves a squash on the floor, reduce the water supply or use distilled water instead of tap water, you can also add 1-2 drops of floor washing products (but no more!), if allowed in the instructions for your model.

💡

Turbo and Maximum modes significantly reduce battery life, and use them only when you need deep carpet cleaning or severe contaminants.

Typical problems and their solution

Even with a reliable device like the Xiaomi Mi Robot Vacuum Mop Essential, users are facing challenges, and here are the most common ones and ways to fix them:

⚠️ Attention: If the robot is constantly "stuck" in the same place, check the height of the thresholds. the maximum height overcome for this model is 2 cm.

Problem 1: The robot is not returning to base.

• 🔋 Check if the docking station is plugged in.
• 📡 Make sure there are no obstacles around the station (minimum 1.5m of free space in front).
• 🔄 Reboot the robot by holding the power button for 10 seconds.

Problem 2: Badly picking up garbage on carpets.

• 🌀 Check if the main brush is full of hair or threads.
• 🔼 Increase the suction power in the settings (Turbo mode or Maximum mode").
• 🧹 Make sure the side brushes rotate freely.

Problem 3: Leaves wet marks after wet cleaning.

• 💧 Reduce the water supply level in the settings.
• 🧻 Check the integrity of the detergent (possibly damaged).
• 🚿 Use distilled water instead of tap water.

If none of the tips worked, try resetting the robot to factory settings. Go to Device Settings → Settings → Reset, and after resetting, you have to reset your Wi-Fi and create a map of the room.

Care for a robot vacuum cleaner: cleaning and replacing consumables

For Xiaomi Mi Robot Vacuum Mop Essential to last a long time, you need to regularly service its components.

• 🧹 Basic brush: remove hair and thread after each cleaning. Remove the brush once a month and wash it under running water.
• 🌀 Side brushes: check once a week. If you wear too much (over 5 mm), replace them with new ones.
• 🔄 Filter: wash once in a while 2 For weeks (water only, no detergents!) change for a new one every day. 3-6 months.
• 💧 Water reservoir: rinse after each cleaning to avoid mold.
• 📦 Dust container: Empty after each use, especially if the robot was running in Turbo mode".

To clean sensors (including laser LDS), use dry soft tissue. Do not use alcohol or abrasives! Dust on sensors can lead to incorrect mapping.

Parts and consumables for Mi Robot Vacuum Mop Essential can be ordered in the official Xiaomi store or at sites like AliExpress. Original accessories last longer, but if the budget is limited, compatible analogues from proven brands (for example, Roborock or Ecovacs) will also be suitable.

⚠️ Warning: If the robot starts making unusual sounds (squeaking, knocking), immediately stop cleaning and check the main brush for foreign objects.

FAQ: Answers to Frequent Questions