How to connect the Xiaomi Mi Robot Vacuum Cleaner 1S robot vacuum cleaner to your phone: full instruction 2026

Xiaomi Mi Robot Vacuum Cleaner 1S has become one of the most popular cleaning assistants thanks to its combination of affordable pricing and advanced features. Laser navigation, smartphone control and integration with the Mi Home ecosystem make it indispensable for modern homes. However, many users face difficulties in the initial connection stage to the phone - especially if it is about the first setup or change of the Wi-Fi network.

In this article, we will analyze the step-by-step algorithm for synchronizing a vacuum cleaner with a mobile device, consider typical errors (for example, problems with connecting to a mobile device). 5G-networks or regions incompatibility in Mi Home, as well as give recommendations for optimization of work through the application. Special attention will be paid to setting up voice control through Alice or Google Assistant – this feature is often overlooked, although it greatly simplifies interaction with the device.

If you’ve just unpacked the vacuum cleaner or decided to reconfigure it after resetting, this guide will help you avoid common mistakes and save time.All steps are illustrated by current screenshots from the Mi Home app (2026 version) and take into account the latest firmware updates for the Mi Robot Vacuum 1S.

1.Preparation for connection: what to check before starting

Before you start syncing, make sure that the basic conditions for a successful connection are met, and neglecting these points leads to errors like “Disconnected to the device” or “Check Wi-Fi network” in 80% of cases.

• 📱 Smartphone: Install the latest version of the Mi Home app (for Android, through Google Play, for iOS, through the App Store). Older versions may not support the Mi Robot connection protocol. 1S.
• 📶 Wi-Fi network: The vacuum cleaner only works with 2.4GHz networks. If your router broadcasts two networks (2.4 and 5GHz) under the same name, temporarily disable 5GHz or create a separate network for 2.4GHz.
• 🔋 Battery charge: The vacuum cleaner should have a minimum of 20% charge. At low charge, the device can interrupt the connection process.
• 🌍 Region in Mi Home: Select Russia (or Mainland China if you use the Chinese version of the vacuum cleaner) in your profile settings. Region mismatch is a common cause of synchronization errors.

Some models (such as the TP-Link Archer C6 or Keenetic) block new devices from connecting via AP Isolation or Client Isolation by default. Disable this option in the router control panel before connecting the vacuum cleaner.

⚠️ Note: If you use a corporate or hotel Wi-Fi network (with authorization through the portal), you will not be able to connect the vacuum cleaner.

2. Installation and configuration of the Mi Home app

The Mi Home app is the central control element for all Xiaomi devices, including the robot vacuum cleaner. Its installation and proper configuration take no more than 5 minutes, but the stability of further work depends on this stage.

Download the application from the official store:

• 🤖 Mi Home for Android
• 🍎 Mi Home for iOS

Don't use it. APK-third-party

After installation:

1. Launch the app and select the region of Russia (or China for the Chinese version of the vacuum cleaner).
2. Sign up or sign in to an existing Xiaomi account (via phone number, email or Mi Account).
3. In the main menu, tap the + icon in the upper right corner and select Add Device.

If you already have other Xiaomi devices (like Yeelight light bulbs or Aqara sensors), the app may suggest creating a vacuum cleaner room.

3. Step-by-step instructions: how to connect Xiaomi Mi Robot 1S to the phone

Now, to the basic process, follow the instructions strictly in steps, and any deviation can cause a connection to fail.

1. Turn on the vacuum cleaner: Press and hold the power button on the device body for 3 seconds. You will hear an audible signal, and the indicator will light up white (standby) or orange (low charge).
2. Activate pairing mode: Simultaneously press the Home button (with the image of the house) and Power for 5 seconds until you hear a voice message in Chinese: "(Please connect). The indicator will flash blue.
3. Select the device in Mi Home: In the application, click "Add device" →"Robot vacuum cleaner" →"Mi Robot Vacuum 1S". If the model is not listed, select "Other Device" and enter the name manually.
4. Connect to the temporary network: the application will offer to connect to the Wi-Fi vacuum cleaner network (the name will be type) MiRobot_XXXX). Go back to your phone's Wi-Fi settings, find that network and connect to it. No password required.
5. Return to Mi Home: Once connected to the temporary network, the app will automatically detect the vacuum cleaner. select your 2.4GHz home network from the list and enter the password.
6. Wait until it is completed: The synchronization process will take 1-3 minutes, and when completed, the vacuum cleaner will emit an audible signal, and its card with basic functions will appear in the application.

If at the stage of connection to the temporary network the phone does not find MiRobot_XXXX, try:

• 🔄 Reboot the vacuum cleaner (hold the power button for 10 seconds).
• 📵 Temporarily disable mobile data on the phone.
• 🔌 Move the vacuum cleaner closer to the router (no more than 2 meters away).

4. Typical errors and their solutions

Even with the exact following of the instructions, there can be failures.-5 Mistakes encountered by Mi Robot users 1S, and ways of eliminating them.

If none of these things worked, try resetting the vacuum cleaner to the factory.

1. Turn off the vacuum cleaner.
2. Press the power button for 10 seconds until the indicator flashes yellow.
3. Release the button, the reset is complete, and you can re-enact the connection.

⚠️ Warning: Reset will delete all stored room maps and cleaning settings.If the vacuum cleaner has already worked before, back up the cards at Mi Home → Settings of the device → Backup.

5.Configuring control via phone: basic functions

Once successfully connected, you will be able to access all the functions of the vacuum cleaner through the application, and we will discuss the key features that you should configure immediately:

• 🗺️ Map of the room: After the first cleaning, the vacuum cleaner will create a map of the apartment. In Mi Home, you can divide it into zones, specify virtual walls or forbidden areas (for example, around the carpet).
• ⏰ Cleaning schedule: Set up automatic cleaning by day of the week and time; Optimally, when you are not at home (for example, from 10:00 to 12:00).
• 🔊 Voice notifications: Enable the option in the settings to let the vacuum cleaner report the start/end of cleaning or low charge.
• 🔄 Cleaning modes: Choose the suction force (Silent, Balanced, Turbo) and the type of cleaning (By area, Local, Along the walls).

So you can also focus on setting up cleaning areas, for example, you can program a vacuum cleaner to clean the hallway and kitchen every day, and you can clean the bedroom once a week.

1. Open the map at Mi Home.
2. Press "Zones" and circle the desired area.
3. Select cleaning mode and keep the schedule.

If you have other Xiaomi devices (like smart sockets or motion sensors), they can be integrated with the vacuum cleaner through scenarios, such as running the cleaning when you open a window (according to the sensor) or when you leave home (by smartphone geolocation).

💡

To keep the vacuum cleaner from getting stuck under furniture, stick infrared beacons (sold with some Xiaomi models) on the legs of the sofa or cabinet, creating an “invisible wall” that the robot can bypass.

6.Voice control: Alice, Google Assistant and Siri

One of the key benefits of the Mi Robot 1S is that it supports voice assistants, which allows you to control the vacuum cleaner without opening an application, such as:

• 🗣️ Alice (Yandex): "Alice, turn on the vacuum cleaner" or "Alice, set the vacuum cleaner turbo mode".
• 🤖 Google Assistant: OK Google, start cleaning the living room".
• 🍎 Siri (via Shortcuts): "Hey Siri, launch the robot vacuum cleaner".

To set up voice control:

1. In Mi Home, go to Device Settings → Voice Assistant.
2. Choose the right assistant and follow the instructions for linking accounts.
3. For Alice, additionally install the skill "Xiaomi Mi Home" in the Yandex app.

Important: voice commands only work when the vacuum cleaner is connected to Wi-Fi. If the device is offline, the assistant will report an error. Also, some commands (for example, cleaning a particular area) may not be supported in Russian - in this case, use English phrases:

• Start cleaning the kitchen – start cleaning the kitchen.
• Set suction to max: Set maximum suction power.

⚠️ Note: When using Google Assistant, make sure that English is selected in the vacuum cleaner language settings in Mi Home.

7. Firmware Update: Why It Matters and How to Do It

Regular firmware updates fix bugs, add new features (such as support for additional voice commands) and improve navigation algorithms. Check the relevance of your Mi Robot 1S software:

1. Open Mi Home and select your vacuum cleaner.
2. Go to Settings → About the device → Update firmware.
3. If a new version is available, click Update and wait until it is completed (don’t turn the vacuum cleaner off the power!).

The latest firmware versions for Mi Robot 1S (2026) include:

• 🆕 Improved mapping with furniture recognition.
• 🔋 Optimization of energy consumption (extended operating time up to 120 minutes).
• 🗣️ Support for Russian-speaking voice teams for Alice.

If the update “hangs” at the boot stage:

• Check the Internet speed (minimum 2 Mbps).
• Reconnect the vacuum cleaner to Wi-Fi.
• Try again in 1-2 hours (Maybe Xiaomi servers are overloaded).

8. Alternative ways to control without a phone

While the main way to manage is through Mi Home, there are other options that come in handy in case of problems with a smartphone or Wi-Fi:

• 🎮 Remote: Complete with some versions of the Mi Robot 1S It lets you start/stop cleaning, send a vacuum cleaner to the base, or turn on Spot Cleaning).
• 🖥️ Web interface: You can use the browser to control the vacuum cleaner over the local network. http://[IP-vacuum cleaner address IP You can use the router or via the Fing app).
• 🤖 Offline voice commands: Some models support basic commands without the Internet (for example, "Start cleaning"), but you need to pre-configure offline mode in Mi Home.

To use the web interface, you will need:

1. Find out. IP-vacuum cleaner address (via router or Fing app).
2. Enter the address in the browser (recommended Chrome or Firefox).
3. Authorize with the token (it can be obtained through Mi Home using the developer tools).

This solution is suitable for advanced users, because it requires working with APIs and access tokens, and for most tasks, a standard application will suffice.

💡

If the vacuum cleaner does not connect to Wi-Fi, but operates from the remote, the problem is precisely in the settings of the network or router, and not in the device itself.

FAQ: Frequent questions about connecting Xiaomi Mi Robot 1S