Xiaomi robot vacuum cleaner: how to do wet cleaning efficiently and without errors

Xiaomi vacuum cleaners are no longer just smart brooms — modern models are equipped with wet cleaning systems that can replace a mop 80 percent of the time. But many users are faced with problems: divorces remain, wipes get dirty quickly, and floors do not get cleaner.

In this article, we will discuss all the nuances of wet cleaning, from the choice of consumables to the programming of routes, you will learn which Xiaomi models are better at cleaning floors, how to avoid typical errors (for example, pouring parquet) and how the system differs. OZMO And then there's the secret chips that the manufacturer doesn't advertise, but they save time and nerves.

Spoiler: robot wet cleaning requires as much preparation as manual cleaning, but if done correctly, the results will exceed expectations, especially in homes with children or animals, where floors are dirty every day.

What Xiaomi robot vacuum cleaners support wet cleaning

Not all Xiaomi models can wash floors. Wet cleaning feature appeared in the Mi Robot Vacuum line since the first generation with the system OZMO (2018, but since then, technology has evolved a lot. Today, there are 3 types of systems:

1. Classic moping (wet wipe): there are budget models like Mi Robot Vacuum-Mop 2 Lite. The wipe is attached to the bottom panel and slightly moistened from the tank. Minus - weakly washes dried stains, but cheap to use.

2. System system OZMO (Vibrational Mop: Used in Xiaomi Mi Robot Vacuum-Mop 2/2 Pro, Dreame D9 And the napkin vibrates at a frequency. 3000 fluctuation per minute, which improves cleaning 40%. Suitable for laminate and tiles, but not recommended for parquet.

3.Electronic humidity control system: top-end models like Xiaomi Mi Robot Vacuum-Mop 2 Ultra or DreameBot X30 Ultra automatically adjusts the water supply depending on the type of coating, and you can wash short-pile carpets here (but not wool-pile carpets!).

🔹 How to know if your model supports wet cleaning?

• 🔍 Look at the bottom panel: if there is a cloth compartment and a water tank, there is a function.
• 📱 In annex Mi Home/Dreame It should be a section called "Wet cleaning" or "Mopping".
• 🛒 On the box or in the characteristics, look for a mention OZMO, Mopping or “wet cleaning".

Preparing the robot for wet cleaning: what to do before the first launch

The first wet cleaning operation without preparation is a guaranteed way to damage the floors or the robot.

🔧 1. Installation of the tank and napkin

The water tank is usually attached to the dust collector (in hybrid models) or to the side.

• 💧 Pour only distilled or boiled water – tap water leaves a plaque on the parts.
• 🧼 If you use detergent (allowed only for models marked Detergent), dilute it strictly according to the instructions. Xiaomi is suitable for the original tool Mi Mop Detergent or analogues without aggressive surfactants.
• 🧽 Wash the wipe before first use manually without air conditioning - it reduces absorption.

🔧 Set-up in the annex

In Mi Home or Dreame, find the Mopping Settings section, and you can select:

• 🌊 The intensity of the water supply (for laminate - minimal, for tile - average).
• 🔄 Cleaning mode: only wet, only dry or combined.
• 🚫 Exclusion Zones: Mark carpets that can not be wet.

⚠️ Note: If your model has the function of Carpet Detection (detection of carpets), be sure to activate it – the robot will automatically lift the napkin on the carpets.

Step-by-step: how to turn on wet cleaning

The launch process depends on the model, but the overall scheme is the same. Consider the example of Xiaomi Mi Robot Vacuum-Mop 2 Pro:

1️⃣ Pour water into the tank.

Open the tank lid (usually marked with a symbol) 💧) And fill it up to the mark. MAX. For the first cleaning, 200-250 ml is enough - this is enough for 60-80 m².

2️⃣ Put a napkin in.

Take the dust collector off, attach the napkin to the mop platform, make sure it fits tightly, or there will be unwashed stripes. OZMO napkin is attached to Velcro, in budget - on the fasteners.

3️⃣ Select the mode in the application

Open Mi Home → pick a robot. → Cleaning Mode → Mopping. You can set it up here:

• 📍 Cleaning area: allocate rooms on the map.
• 💦 Water level: for parquet - Low, for tile — Medium/High.
• 🔄 Number of passes: for severe pollution, set 2 passes.

4️⃣ Start cleaning.

Press Start in the app or a button on the robot body. For the first 5-10 minutes, watch it - check if there are puddles left (this is a sign of improper water supply setting).

📌 If the robot stops and gives a Mop Error error, check it out:

• 🔋 The tank charge (possibly the water has run out).
• 🧺 Position of napkin (she could move out).
• 🚫 Obstacles (the robot may have been stuck on the carpet).

💡

If the robot leaves a laminated stain, add 1 tbsp. spoonful of vinegar (500 ml) to the water. This will remove the soapy plaque and give shine. But do not use vinegar more than 1 time a month - it can damage the tank seals.

What cleaning solution can be used (and which one can not!)

Xiaomi officially allows only original detergents or clean water, but in practice many users are experimenting with alternatives.

⚠️ Warning: If you use an unauthorized tool and the robot starts to spit with water or leave white spots, immediately flush the system:

1. Pour the residues of the solution.
2. Pour clean water and start cleaning for 5 minutes.
3. Repeat 2-3 times.

🔬 Lifehack for severe pollution: If the floor has dried stains (for example, from juice or coffee), before wet cleaning, go to the robot in dry cleaning mode with maximum power. This will raise the main dirt, and the mop will cope more effectively.

Common Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes that negate the benefits of wet cleaning. TOP-5 Failures and How to Correct Them:

🔴 Mistake 1: Using a regular cloth instead of a special wipe

Regular rags don't absorb water evenly, leaving wet stripes.Solution: buy the original Xiaomi wipes (article) ZNMS01WM) microfiber-coated.

🔴 Mistake 2: Forgot to remove long-pile carpets

So the robot can get stuck or flood the carpet, which will cause mold, so you can use the app to mark all carpets as "exclusion zones" or activate Carpet Detection.

🔴 Mistake 3: Too much water for laminate flooring

Excess moisture deforms the wood coverings. Solution: expose the water level to Low and make sure that the wipe is squeezed out (manually check before cleaning).

🔴 Mistake 4: Do not clean the tank after cleaning

Residues of water + dirt = Solution: after every cleaning:

• 💦 Pour water.
• 🧼 Rinse the tank with warm water.
• ☀️ Dry in the air (do not use a hair dryer!).

🔴 Error 5: Starting a cleanup without dry cleaning

If there's sand or big garbage on the floor, the napkin will smear the dirt, not remove it. So, you can start the robot in Vacuum Only mode first, then you can start Mopping.

How to care for a napkin and a tank: extend the service life

A wipe and a water tank are the most vulnerable elements of a wet cleaning system, and if left untreated, they fail within 2-3 months.

🧼 Care for a napkin:

• 🧺 Wash after each 3-4 cleaning in the washing machine (mode "Delicate washing", temperature up to 40)°C).
• ❌ Do not use air conditioning for laundry - it clogs the pores of fabric.
• ☀️ Dry in straightened form on a horizontal surface (not on a battery!).

💧 Reservoir care:

• 🧹 After each cleaning, wipe the tank dry with a soft cloth.
• 🍋 Disinfect once a month: pour the solution (1 liter of water) + 1 tbsp. citric acid), leave for 10 minutes, then rinse.
• ❄️ If the robot is not used for more than a week, drain the water and keep the tank open.

📊 Life of consumables:

Critical information: If a napkin starts to leave black stripes on the floor, it's a sign that its fibers have broken down and are now polluting the surface, and this napkin needs to be replaced urgently, or you'll have to wash the floors manually.

Comparison of models: which is better to wash the floors

Not all Xiaomi robot vacuum cleaners are equally good at wet cleaning, and we tested 5 popular models and ranked them on the effectiveness of moping:

💡 Conclusions:

• 🏆 Best Budget Model: Mi Robot Vacuum-Mop 2 Pro – Optimal Price/Quality Rate.
• 🏅 Best for large areas: DreameBot X30 Ultra - washes 200 m2 without refueling.
• 🚫 Don't take for carpets: Viomi V3 Mi Robot Vacuum-Mop 2 Pro – They do not have protection against wet pile.

💡

If you need to clean carpets with short pile, choose models with Carpet Lift function (automatic lifting of a napkin) – for example, DreameBot. D10 Plus or Xiaomi Mi Robot Vacuum-Mop 2 Utra.

FAQ: Answers to Frequent Questions