Connecting the robot vacuum cleaner Xiaomi G1 to the phone: full instructions with pictures and tips

Why sync Xiaomi G1 with your phone?

The Xiaomi Mi Robot Vacuum G1 (or Xiaomi G1) is not just a cleaning device, but a full-fledged part of the smart home ecosystem, and connecting it to a smartphone gives you access to remote control, schedule settings, cleaning mode choices, and even integration with voice assistants like Alice or Google Assistant.

Without synchronization with your phone, you lose half the functionality: you can’t start cleaning remotely, get notifications about the end of work or locking wheels, and update the firmware of the device. Fortunately, the connection process takes no more than 5-10 minutes, if you know all the nuances. In this article, we will analyze the step-by-step instructions for Android and iOS, and solve typical problems that users face.

Important: Xiaomi G1 supports connection only through official applications - Mi Home (old version) or Xiaomi Home (new, recommended).

What apps do you need to connect to the Xiaomi G1?

Since 2023, Xiaomi has been actively moving users from Mi Home to a new app, Xiaomi Home. Both work, but the new one is wider and the interface is more intuitive.

• 📱 Xiaomi Home is a modern app with support for all new devices, including G1. Improved navigation on the cleaning map and integration with Mijia.
• 📱 Mi Home is outdated, but still relevant for older models. It may lack some features for the new model. G1 (for example, zoning).
• 🌐 Both apps are available for Android (from version 6.0) and iOS (from 12.0).

We recommend using Xiaomi Home, as it is less likely to have synchronization errors.

• 🤖 Xiaomi Home for Android
• 🍎 Xiaomi Home for iOS

⚠️ Note: Do not download applications from third-party sources (for example, APK-This can lead to leakage of Xiaomi account data or locking of the device.

Preparation of the robot vacuum cleaner Xiaomi G1 to connect

Before syncing with your phone, make sure the vacuum cleaner is ready to go, and skipping these steps is the main cause of connection errors.

Battery Charging ≥ 50% | Installation of vacuum cleaner on a flat surface | Powering button on the case | Resetting (if vacuum cleaner used) | Checking of the Wi-Fi indicator (should flash orange)

-->

If the vacuum cleaner is new, it is already in standby mode (Wi-Fi flashes orange). If the device has been previously used, reset to factory settings:

1. Press the power button on the case for 5-10 seconds until you hear the beep.
2. After the reboot, the Wi-Fi indicator will start flashing orange, which means that the vacuum cleaner is ready for synchronization.

Also check that your router supports 2.4GHz – Xiaomi G1 does not work with 5GHz networks. If the router has the same name for both frequencies, divide the networks in the router settings.

TP-Link|ASUS|Xiaomi|Keenetic|D-Link|Other-->

Step-by-step: how to connect Xiaomi G1 to the phone

Consider the process on the example of the application Xiaomi Home (for Mi Home steps are similar, but the location of the buttons may differ).

Step 1: Registration of Xiaomi Account

If you don’t have an account, create it:

1. Open Xiaomi Home and click “Register”.
2. Enter your email or phone number (we recommend linking both to restore access).
3. Confirm registration via SMS or letter.

You already have an account? Just log in to your data.

Step 2: Adding a device

In the main menu of the annex:

1. Press + (Device Adding Icon) → Add Device.
2. Select the category "Cleaning" → "Robot vacuum cleaner".
3. In the list of models, find the Xiaomi Mi Robot Vacuum G1 (or Mi Robot Vacuum-Mop G1 if your model has a floorwashing function).

Step 3: Connect to Wi-Fi

The most critical stage. Follow the instructions in the appendix:

1. Make sure your phone is connected to a 2.4GHz network (not 5GHz!).
2. Click “Next” and wait for the app to find the vacuum cleaner (the Wi-Fi indicator should flash orange).
3. Enter your Wi-Fi password manually (copying may not work).
4. Wait for the sound signal from the vacuum cleaner - this means a successful connection.

If you can't find the vacuum cleaner, restart the router and take the step again, sometimes by temporarily shutting down the firewall on your phone.

Step 4: Set up the region and update the firmware

After connection:

1. Choose the region “Russia” (or your country) – this is important for the correct operation of voice commands.
2. The app will offer to update the firmware – agree, as the new versions fix navigation errors and add features.
3. Wait for the update to complete (the vacuum cleaner will restart).

💡

Always update the Xiaomi G1 firmware immediately after you connect – this eliminates cleaning card bugs and improves laser navigation accuracy.

Solution: Why is the Xiaomi G1 not connected to the phone?

Even with the right actions, there can be mistakes, and let's look at the typical scenarios and how to fix them.

If nothing helps, do a full vacuum cleaner reset:

1. Press the power button for 15 seconds until the double signal sounds.
2. Repeat the connection process from scratch.

⚠️ Note: If the vacuum cleaner was previously linked to another Xiaomi account, the new owner will not be able to connect it without resetting.

Xiaomi G1 Setting Up After Connection: What Can You Do?

Successful synchronization is just the beginning, and now you can customize the vacuum cleaner to suit your needs.

• 🗺️ Cleaning Map: After the first run, the vacuum cleaner will map the room, and in the app you can edit it — add restricted areas, divide into rooms, install virtual walls.
• ⏰ Schedule: Set automatic cleaning by day of the week and time, such as 10:00 a.m. daily when you are not home.
• 🔋 Modes of operation: Select the cleaning intensity (Silent, Balanced, Turbo) or activate the floorwashing function (if the model supports the cleaning).
• 🔊 Voice notifications: Enable alerts to complete cleaning or wheel lock.

For maximum efficiency:

• Remove from the floor small objects (wires, toys) that may get stuck in brushes.
• Regularly clean the main filter and side brush - this will prolong the life of the vacuum cleaner.
• Use the Zone Cleaning feature if you only need to clean part of the room (for example, under the chair).

💡

If the Xiaomi G1 is often lost or misses the base, check the light level in the room. Laser rangefinder does not work well in complete darkness - turn on the night light or leave a faint light.

Smart Home Integration: Alice, Google Home and Home Assistant

A vacuum cleaner connected to a phone can be made part of the smart home ecosystem.

• 🗣️ Yandex Alice: Say "Alice, turn on the vacuum cleaner" or "Alice, start cleaning in the living room." To do this, add the device in the Yandex app through the section "Smart home».
• 🤖 Google Assistant: Activate Xiaomi Home skill in Google Home and use commands like “OK Google, fix the vacuum cleaner” (to return to base).
• 🏠 Home Assistant: For advanced users, add a vacuum cleaner through Xiaomi Miio integration (you will need a device token that can be obtained through the Mi Home app).

Example of Home Assistant (for automation):

automation:


- alias: "Run the vacuum cleaner on schedule"




trigger:




platform: time




at: "09:00:00"




action:




service: vacuum.start




target:




entity_id: vacuum.xiaomi_g1

⚠️ Note: When using voice assistants, make sure that the Xiaomi Home settings enable access for third-party services (Settings) → Smart home. → Access management).

FAQ: answers to frequent questions about the connection Xiaomi G1