Xiaomi Robot Cleaner: How to Use, Set Up and Maintain

Modern cleaning devices make everyday life much easier, but the first acquaintance with the gadget often raises questions for beginners. The correct initial setup of the Xiaomi Robot Vacuum is critical for long battery life and accuracy of navigation. Many users make the mistake of starting cleaning without first calibrating the sensors.

In this article, we will take a closer look at activation, Wi-Fi connectivity, and basic scenarios, and learn how to turn a puck into a smart assistant that keeps things clean without you, and it's important to understand that intelligent route planning is only available after you've set it up properly.

Preparation of the device for the first launch

Before you press the buttons, you need to physically prepare the unit. Remove the device from the box and remove all transport films, especially from the side sensors and charging contacts. If you ignore this step, the navigation system may not work properly, and charging will be intermittent.

Set the side brush, align the grooves, and make sure that the main roller rotates freely in its bed. Check the dust container: it should be easily inserted and snapped to a characteristic sound. Only after mechanical assembly can electrical activation begin.

⚠️ Warning: Before the first inclusion, be sure to remove the protective film from the laser rangefinder (LDS) on the top cover, otherwise the map of the room will not be built.

To turn on, press the main power button on the case for a few seconds. The device will emit a welcome sound, and the indicators will light up.

Installation of the application and connection to Wi-Fi

The main management tool is the Mi Home mobile app (or Xiaomi Home), download it from the official store (App Store or Google Play) and create an account. When registering, it is important to choose the right region - usually "Russia" or "China", depending on the version of your device.

Adding the device is done via the + menu in the upper right corner. The app automatically scans the network and suggests adding the devices found. If the automatic search didn't work, select the model from the list manually. During the setup process, you will be asked to enter a password from the Wi-Fi network.

Pay attention to signal frequency. Most Xiaomi Vacuum models only support the 2.4 GHz band. If your router distributes a 5 GHz network, you need to switch to 2.4 GHz or combine them into a single network with the same name (SSID) in the router settings.

First scan and map creation

Once you're connected successfully, you need to do the first general cleaning to build the map, remove wires, socks and other small items that might confuse your brushes, and start cleaning completely through the app or button on the case.

And as it works, it will move around the perimeter randomly, creating a virtual plan of your living space, so don't interrupt this process, don't move the charging base, and if the device gets stuck, then you can gently release it and continue cleaning.

When you complete the cycle, you'll see a saved map in the app, so you can rename rooms, divide or merge areas, so that you can only clean specific areas in the future, like the kitchen.

Mode and schedule settings

The app's functionality allows you to flexibly manage the cleaning process, and you can choose the suction force: Quiet mode is suitable for daily cleanliness, Maximum mode is suitable for carpets with pile, and you can also adjust the brush mode.

One of the most useful features is creating a schedule, so you can set up automatic start-ups on certain days and times, for example, it's convenient to set the start at 10:00 when everyone is gone and the device won't interfere with the noise.

For owners of models with the function of wet cleaning (Mopping), water level settings are available. In the application you can choose low, medium or high levels, or turn off the water supply completely if you only need dry cleaning.

Filter care and maintenance

Regular maintenance is essential to the efficient operation of the equipment, and the main HEPA filter requires periodic cleaning, and it must be knocked out of the trash can every 2-3 cleanings to restore air permeability.

Once a week, it is recommended to wipe the Cliff sensors and wheel modules with soft dry cloth.Contamination of the sensors can cause the robot to begin to “fear” dark surfaces or fall from rapids.

Remember to empty the dust container after each cleaning, an overflowing tank reduces suction efficiency and increases engine load, and wipe the inside of the container with a wet cloth to avoid unpleasant odor.

Solving Typical Problems and Errors

You may encounter voice error messages during operation, such as a message about a wheel getting stuck requiring you to check the height of the sills or remove obstacles. If a robot reports an engine overload, check the main roller for wound hair.

A common problem is loss of Wi-Fi connection. If the network indicator flashes orange, try rebooting the router. Also make sure the router is not too far from the cleaning area, the signal should be stable in all rooms.

If the device is permanently losing the map, it is possible that the laser rangefinder is closed by a foreign object or damaged, in which case a visual inspection of the upper "turret" for free rotation is required.

💡

Use magnetic tape (if the model is supported) or virtual walls in the app to prevent the robot from entering areas with wires or long-pile carpets.

Frequently Asked Questions (FAQ)

💡

Timely cleaning of sensors and regular replacement of filters extend the life of the robot vacuum cleaner twice and maintain the suction power at the factory level.