Xiaomi Mi Robot Vacuum G1 is one of the most popular models in the brand’s line of smart appliances, combining powerful suction (up to 2500 Pa), laser navigation LDS and support for voice assistants. However, even experienced users have difficulties with the first connection of the device to the Wi-Fi network or the Mi Home application. In this article, we will analyze all the stages of settings, from unpacking to integration with Google Assistant or Alice, and consider typical errors and how to fix them.
The G1 features MiOT (Mi IoT Protocol), which requires binding to a Xiaomi account, which means that without registering in the brand ecosystem, you can not fully use the vacuum cleaner - even local control through buttons on the case is limited to basic functions. We will explain in detail how to circumvent possible restrictions (for example, when changing the region of the account) and what to do if the device "does not see" the network.
1. Connection Preparation: What to Check Before Starting Setup
Before you start pairing the Xiaomi G1 with the app, make sure all the preconditions are met.Nevertheless, neglecting these steps often leads to errors like “Device is unresponsive” or “Unable to connect to the network.”
- 📱 Install the Mi Home app (at least 6.5.400) from Google Play or the App Store. Alternatively, Xiaomi Home (for users in China).
- 🔌 Charging the vacuum cleaner, make sure that the battery level is at least 20%, and if the discharge is less than 15%, the device may interrupt the connection process.
- 🌐 Wi-Fi settings. Vacuum cleaner. G1 Supports only the network 2.4 GHz (standards) 802.11 b/g/n). If your router is running in mode 5 GHz or uses WPA3, You'll have to switch temporarily. WPA2-PSK.
- 🔒 Xiaomi account region. The device is tied to the region of sale. G1 In China, and the account is registered in Russia, there may be problems with the addition.
Important: If you have previously used another Xiaomi robot vacuum cleaner (such as the S50 or STYJ02YM), remove it from the app before adding the G1.
2. Step-by-step instructions: how to connect Xiaomi G1 to Wi-Fi via Mi Home
The pairing process takes no more than 5 minutes, if you follow the algorithm, and we break it down into steps with explanations for each step.
Step 1: Turning on the vacuum cleaner
Press and hold the power button on the G1 body for 3-5 seconds until a voice greeting is heard in Chinese or English (depending on the firmware version).
Step 2: Adding the device to Mi Home
- Open the Mi Home app and go to the Devices tab» → «Add the device» (+).
- Select the category "Vaccelers" (or search "Mi Robot Vacuum G1").
- Click Add and confirm access to Bluetooth and Wi-Fi (required to scan the device).
Step 3: Connect to the network
The app will suggest you select a Wi-Fi hotspot. Specify your network and enter your password.
- 📶 Name of the network (SSID) does not contain Cyrillic or special symbols (for example, #,!).
- 🔑 Password is entered in English layout (even if it consists of numbers).
- 🔄 The router does not use the “Hide” function. SSID» — The vacuum cleaner will not be able to find such a network.
After successful connection, the vacuum cleaner will emit an audio signal, and its card with the main parameters (charge level, cleaning status) will appear in the application.
☑️ Checklist before connection
3. Possible errors in connection and their solutions
Even if you follow the instructions accurately, users will experience failures, and here is a table of the most common errors and how to fix them.
| Code/Error message | Reason. | Decision |
|---|---|---|
| “I couldn’t connect to the device.” | The vacuum cleaner has not switched to pairing mode or is too far from the router. | Reboot the vacuum cleaner (hold the power button for 10 seconds) and try again at a distance of 1-2 meters from the router. |
| The device is not supported in your area. | Conflict of the region of the account Mi Home and vacuum cleaner firmware. | Change the region in your profile settings to China (temporary solution) or update your firmware through Xiaomi Home. |
| Network Error (Blinking Red Indicator) | An incorrect Wi-Fi password or router blocks new devices from connecting. | Reboot the router, check the password, disable MAC-filtering in the router settings. |
| “Offline Device” After Successful Connection | Issues with Xiaomi’s cloud server or traffic blocking by the provider | Check your internet connection, try switching to mobile data, or use a VPN (for example, for users in Russia). |
A critical feature of the G1 model is that if the vacuum cleaner was previously linked to another account, you can only reset through a physical button on the case (hold 10 seconds to the beep).
What if the vacuum cleaner does not respond to the reset button?
4. Customization of the vacuum cleaner after connection: basic parameters
After successfully pairing with Mi Home, it is recommended to immediately configure the key settings to avoid problems during cleaning.
- 🗺️ Map of the premises. G1 builds the map with a laser rangefinder. To calibrate accurately, do the first cleaning in Full mode (without obstacles).
- 🚫 Zones of exclusion: The app can identify areas that the vacuum cleaner will bypass (e.g., high-pile carpets or children's toys).
- 🕒 Schedule. Set up automatic cleaning time. Optimal when you're not at home (e.g. 10:00 to 12:00).
- 🔊 Volume of voice prompts. You can turn off voice or turn down the volume in the settings (useful for night cleaning).
Notice the "floor type" setting in the suction settings. For laminate or tile, select "hard", for carpet, "soft", which affects suction strength and battery consumption.
💡
If the vacuum cleaner is often lost in larger spaces, reduce the cleaning speed in settings (Settings → Modes → Speed) and this will increase the accuracy of mapping, but will extend the cleaning time by 10-15%.
5.Integration with voice assistants and smart home
Xiaomi G1 supports management through Google Assistant, Alice (Yandex) and Amazon Alexa.
- In the Mi Home app, go to the vacuum cleaner settings and select Voice Control.
- Link your Xiaomi account to the appropriate assistant: For Google Assistant: open the Google Home app, click + → Install device → Have devices already? and select Xiaomi. For Alice: say Alice, find my devices and log in through your Xiaomi account.
After synchronization, you can use voice commands like:
- 🎤 «Okay, Google, run the kitchen vacuum cleaner»
- 🎤 «Alice, put the vacuum cleaner back on base»
- 🎤 «Alexa, put the living room cleaning on hold»
For advanced users, integration with Home Assistant is available through the Xiaomi Miio component. You will need to get the Token device (instructions are available on the official website).
6.Firmware Update: Why It Matters and How to Do It
The Xiaomi G1 firmware affects the stability of operation, accuracy of navigation and compatibility with new features (such as carpet recognition or improved cleaning algorithms).
To update the software:
- Open the vacuum cleaner card in Mi Home.
- Go to "Settings» → «Firmware update».
- If a new version is available, click Update and wait for the process to complete (5-10 minutes).
⚠️ Warning: Do not interrupt the update or turn off the vacuum cleaner during the process.If the battery runs below 15%, the device may "block" and require a discharge through the service center.
The latest stable version of the firmware for G1 momentarily 2026 year-end — 3.5.8_0046. It fixes bugs with Wi-Fi connection 6 routers and adds support for multi-level maps (for homes with multiple floors).
7. Alternative ways of connecting: without Mi Home
If you do not have access to Mi Home (for example, due to regional restrictions), you can control the vacuum cleaner through third-party applications or protocols:
- 📱 Valetudo is an open source software for Xiaomi robot vacuum cleaners, requiring root access to the vacuum cleaner (suitable for power users).
- 🌐 Home Assistant with Xiaomi Miio component, allows you to manage your device locally, without the Xiaomi cloud.
- 🔧 Miio protocol: You can send commands directly through Python scripts or MQTT (An example of the code is available on GitHub).
Note that using informal methods can lead to loss of warranty and unstable operation of the device. For example, after Valetudo firmware, the vacuum cleaner may stop updating through the Mi Home.