Modern peripherals from Xiaomi, such as the wireless mice of the Mi Smart Mouse or Portable Mouse series, have become the standard of ergonomics and minimalism in the market, their popularity is due not only to the stylish design and metal body, but also to the versatility of the connection, which allows you to use an accessory with a wide range of gadgets.
The process of activating a Bluetooth connection often seems difficult to users just because of the lack of familiarity. USB-Open access receiver or specific sequence of actions required by the operating system. However, if you know where the pairing button is hidden and how to properly put the device into detection mode, the whole procedure will take a few minutes and will not require the installation of complex software.
In this article, we will take a closer look at the algorithms for connecting to different platforms, from classic desktops running Windows to smart TVs and mobile devices based on Android and iOS. You will learn about the nuances of dual-mode models, understand the difference between 2.4 GHz and Bluetooth protocols, and learn how to solve typical cursor problems that may arise during operation.
Preparing the Xiaomi mouse for the first inclusion
Before you get to the software settings of your computer, you need to physically prepare the device for operation. Unlike wired counterparts, Xiaomi wireless models require a power source that is usually hidden inside the case to preserve aesthetics. Open the battery compartment on the bottom panel using a coin or a nail, and install the power cells while observing the polarity indicated in the diagram.
The most important element of preparation is the activation of the pairing mode. On the bottom panel of most models, such as the Mi Dual Mode Wireless Mouse, there is a special switch. It can have three positions: off, 2.4 GHz (USB) mode and Bluetooth mode. To connect wirelessly without a dongle adapter, you need to move the lever to the position with the Bluetooth icon.
- 🔋 Make sure the new batteries are installed correctly and fit tightly to the contacts inside the compartment.
- 🔘 Find the hidden sync button: sometimes it is combined with a scroll wheel or requires a long press.
- 📶 Put the switch in mode BT and wait for the quick flashing of the indicator signaling readiness to search.
It is worth noting that some Xiaomi models have a combined activation method. If a simple switching of the toggle does not cause the indicator to blink, try to pinch both the left and right buttons and the scroll wheel for 3-5 seconds. The light indicator should start flashing often in blue, which means successfully entering the device search mode.
⚠️ Warning: If the light flashes slowly or doesn't light up at all, check the battery power. In pairing mode, the mouse consumes more energy, and with a weak charge, it may not enter detection mode.
☑️ Connection readiness
Connecting to computers on Windows 10 and 11
Windows operating systems have built-in drivers for working with HID-Installation of additional software for basic operation of the Xiaomi mouse is not required, however, for stable operation of the Bluetooth adapter, it is necessary that the current chipset drivers and wireless communication module are installed on the computer.
To start pairing, open the Start menu and go to Options, then select Devices (in Windows 10) or Bluetooth and Devices (in Windows 11). Make sure the Bluetooth slider is in the On position, then click Add Bluetooth or another device. In the window that opens, select the first option, Bluetooth, to search for wireless mice, keyboards, and styluses.
The system will start scanning the ether, and in a few seconds the name Mi Mouse or Xiaomi Mouse should appear in the list of available devices. Click on it with the left mouse button (using a touchpad or already connected mouse). Windows will automatically install the necessary drivers, and after 10-15 seconds the cursor should appear on the screen, confirming the successful completion of the procedure.
| Status of indicator | Significance of state | User action |
|---|---|---|
| It's not burning. | Battery off or discharged | Replace batteries, turn on the switchboard |
| Blinks slowly | Standby or low charge | Check the charge, press any button |
| Flicks often | The mode of pairing (Pairing Mode) | Search for the device in the PC settings |
| It's burning all the time. | Successful connection | We can start working. |
In the rare cases where the system sees a device but writes "Driver Error" or "Device failed to configure", try removing the device from the list ("Forget device") and restarting the computer. After restarting, repeat the search procedure.
What if Windows can’t see the mouse?
Configuring pairing with macOS and Apple laptops
Users of the Apple ecosystem appreciate the Xiaomi Mi Mouse for its aluminum body, which is perfectly combined with the design of the MacBook. the process of connecting to macOS is as simple as possible and does not require the installation of third-party utilities, since the system automatically recognizes the HID over GATT protocol used by the mouse.
To get started, click on the apple in the top left corner of the screen and select System Settings (or System Settings in newer versions of macOS). In the window that opens, look for the "Bluetooth" section. Make sure the wireless module is activated. If the mouse has previously connected to another device, make sure it is off or away from it to avoid automatically intercepting the connection.
Put the mouse in pairing mode (frequent flashing of the indicator). The Mi Mouse icon should appear in the list of Mac devices. Press the "Connect" button next to the name. The system can request confirmation of action or show a pairing code, although this is rare for mice. After successful synchronization, the indicator on the case will stop flashing and will only light up when moving.
- 🍎 On macOS, you can adjust the cursor speed and scroll direction in the "Trekipad" or "Mouse" section».
- 🔄 To reconnect to another Mac, simply select the mouse in the Bluetooth list and click “Connect».
- ⚡ The macOS power saving feature can put the device to sleep; just shake your mouse or press a button to wake up.
It is important to note that on some versions of macOS, the scroll wheel may work in an “unnatural” direction (like on a trackpad), which is easy to fix in the system settings by unchecking the “Natural Scrolling” box. Also, MacBook Pro owners with USB-C-only ports may face a problem if they use a USB adapter through a cheap adapter – in Bluetooth this problem is excluded.
⚠️ Note: When upgrading to macOS, the old device profiles may conflict. If the mouse stops working after the system update, remove it from the list of Bluetooth devices and pair again.
Use with Android TV, Smart TV and tablets
Turning a TV into a full-fledged computer or a convenient media center is impossible without a cursor, and the Xiaomi mouse is perfect for this task. Most modern Smart TVs based on Android TV, Google TV or its own shells (for example, Xiaomi Mi TV) support peripheral connection via Bluetooth.
On the remote control, click the settings button (cogs) and go to Add Accessories or Blueooth. The TV will start looking for devices. At the same time, turn on mouse pairing. The Mi Mouse device should appear on the TV screen. Select it to connect.
A feature of using a mouse on a TV is the absence of some context menu buttons that are emulated by combinations. For example, the right mouse button often performs a return function (“Back”), and the wheel can be used to scroll through pages in the browser or application lists.
If you are using an Android tablet, the procedure is similar: settings → Bluetooth → However, it is worth considering that some tablets may not support multi-touch gestures through the mouse or have restrictions on the number of Bluetooth devices simultaneously connected. USB-Adapter (if the tablet supports) OTG) It may be more stable, but it is in the port.
💡
To control the TV, the Xiaomi mouse works in touchpad emulation mode, where the left button is “Input” and the right button is “Back”.
Modes of operation: Bluetooth vs. Bluetooth USB-2.4 GHz adapter
Many Xiaomi mouse models, such as the Mi Dual Mode Wireless Mouse, support two ways to connect. Understanding the difference between the two will help you choose the best option for your task. 2.4 GHz mode uses two ways to connect. USB-a receiver (dongle), which hides in the battery compartment and provides a more stable signal with minimal latency.
Bluetooth mode is convenient because it does not take USB-It's a port that's critical for ultrabooks with limited connectors, but it can be a little more sensitive to interference from Wi-Fi routers and other wireless devices that operate in the same frequency range. For office work and surfing, the difference is not noticeable, but gamers can feel input lag (input delay) in Bluetooth mode.
Switching between modes is done by a physical toggler at the bottom of the device. USB-Adapter, the computer will identify the mouse as standard. HID-The device immediately after inserting the receiver into the port, without having to undergo the pairing procedure. This makes the 2.4 GHz mode preferred for working on a stationary PC.
- 📡 Bluetooth: saves ports, is suitable for laptops and TV, micro-breaks of communication are possible.
- 🔌 USB 2.4 GHz: Maximum stability, instant response, requires busy USB-port.
- 🔄 Dual Mode: the ability to quickly switch between two computers without reconnecting.
It is worth noting that some of the cheap ones USB-Hubs can interfere with the 2.4 GHz signal if the receiver is inserted directly into them. USB-extender for taking the receiver away from the hub body or switch to Bluetooth protocol.
Solution: cursor twitches or doesn't work
Even Xiaomi's robust technology can run into problems. If the cursor moves jerky, disappears, or is delayed, first check the surface. The optical sensor doesn't work well on glossy, transparent, or mirrored tables. Use a mouse mat or a regular sheet of paper for the test.
The second common cause is battery discharge. Even if the indicator is on, the voltage may not be enough to sustain Bluetooth signal transmission. Replace the batteries with new alkaline batteries, avoiding the use of cheap salt counterparts that quickly sit under load.
If the problem is only on one computer, try removing the device from the Bluetooth list and doing the pairing again. In Windows Device Manager, you can try turning off the power saving setting for the Bluetooth adapter, preventing the system from turning it off to save power.
The way to check drivers in Windows:
Control Panel → Equipment and Sound → Devices and Printers → (Right button on Mi Mouse) → Properties → Services.In the event that the mouse is not running on any device and the indicator does not light up even with new batteries, the contacts inside the compartment may have oxidized or the module itself failed, in which case only maintenance or replacement of the device under warranty will help.
💡
To extend the battery life, turn off the mouse with the switch when you have not used it for more than a few hours.