Xiaomi’s machine against the reels: a detailed guide to connecting and setting up

Xiaomi’s Removal Machine is a compact but extremely useful device that helps you quickly clean clothes, furniture, and even car seats. However, many users face difficulties already at the connection stage: the gadget does not sync with the smartphone, does not respond to commands or works intermittently. In this article, we will analyze all the ways of connecting, typical errors and give practical tips on how to integrate the device into the Mi Home or Mi Home Lite ecosystem without unnecessary problems.

Xiaomi machines (such as the Deerma CM500 or Viomi V2) often require pre-configuration through a proprietary app, even if they seem to be “simple” household appliances. Without the right connection, you risk not using key features such as power adjustment, timers or termination notifications. Next, step-by-step instructions for different scenarios, from basic connection to solving non-standard situations.

What models of cars against the coils releases Xiaomi?

Under the Xiaomi brand and its sub-brands (Deerma, Viomi, Mijia), several models of reel removal machines have been released, differing in functionality and connection method.

• 🔹 Deerma CM500 — It's a budget model with wired, no Wi-Fi, but with speed control, suitable for quick removal of the coils from clothes and upholstered furniture.

Importantly, not all models support smart connectivity, such as the Deerma CM500 is autonomous, and the Viomi V2 and Mijia Fabric Shaver require a binding Xiaomi account for full use.

Preparing for the connection: what to do before the start

Before you start syncing your machine with your smartphone, follow a few mandatory steps that will save time and help you avoid common mistakes:

1. Check compatibility. Make sure your model supports app connectivity. For example, the Deerma CM500 doesn't have a Wi-Fi module, so you can't add it to the Mi Home.
2. Update your smartphone firmware. An outdated version of Android or iOS can cause sync failures. Xiaomi devices are recommended MIUI 12+ or Android 10+.
3. Install the current version of Mi Home. Download the app from the official store (Google Play or App Store) and update it to the latest version.
4. Prepare the device. Charge the machine (if it's wireless) or make sure it's connected to the grid. For models with a battery, the charge level should be at least 30%.

If you’re using the Viomi V2 or Mijia Fabric Shaver, check if your smartphone is powered on Bluetooth and Wi-Fi. Some models require a 2.4GHz connection — if your router is only running on 5GHz, you’ll have to switch temporarily or use a signal repeater.

Step-by-step: how to connect the machine to Mi Home

Consider the Viomi V2, as it is the most popular and has full support for smart features. For other models (for example, Mijia Fabric Shaver), the steps will be similar, but the names of menu items may differ.

Step 1. Turn on the machine. Press and hold the power button (usually one) for 3-5 seconds until the light light lights up. Viomi V2 is blue LED, Mijia is white.

Step 2. Launch Mi Home. Open the app and log in to your Xiaomi account. If you don't have an account, sign up in advance.

Step 3. Add a new device:

1. Click on the + icon in the upper right corner.
2. Choose the category "Household appliances" or "Smart home".
3. In the list of devices, find your model (for example, Viomi Fabric Shaver). If it is not available, search by name.
4. Click "Add" and follow the instructions on the screen.

Step 4: Synchronize over Bluetooth. The application will suggest turning on Bluetooth on your smartphone and holding the phone to the machine at a distance of no more than 10 cm Wait for the beep or flashing of the indicator - this means that the devices "saw" each other.

Step 5: Connect to Wi-Fi. Select your 2.4GHz home network and enter a password. If the machine only supports Bluetooth (such as some versions of Mijia), this step will be skipped.

Step 6: Complete the setup. Once you have successfully connected, assign a name to your device (e.g., "Clothing Machine") and select a room in the house (e.g., "Bathroom" or "Bedroom").

Setup and management through the application

Once connected, the machine will appear in the Mi Home device list, so let's figure out what functions are available for control and how to use them correctly.

Basic parameters:

• 🔄 Modes of operation: most models support 2-3 speeds (for example, "Low", "Mediternary", "High.
• ⏱️ Timer: You can set the operating time (e.g. 10, 20 or 30 minutes) useful if you remove the coils from a large product (e.g. a sofa).
• 🔔 Notifications: Enable end-of-service or low-charge alerts (for wireless models).
• 🔋 Battery status: percentage of charge (relevant to Viomi) V2 Mijia Fabric Shaver).

Additional functions (depending on the model):

• 🧹 Autocleaning: Some machines (such as Mijia) have the function of self-cleaning the blades after use.
• 📱 Voice control: If the machine is integrated into the Mi Home, it can be turned on/off via Alice, Google Assistant or Siri (configuration is required in the corresponding application).
• 🔄 Update firmware: Check for updates in the Device Settings section periodically – they can add new modes or fix bugs.

Tip: If the machine is less efficient, check the condition of the blades. In most models, you can replace them - look for original parts labeled Xiaomi or compatible counterparts.

💡

To extend the life of the blades after each use, clean them with a soft brush (usually included) that will remove the fibers of the fabric and prevent dulling.

Typical Connection Errors and Their Solutions

Even when following the instructions, users often encounter problems, and we've collected some of the most common errors and ways to fix them:

If none of these things worked, try resetting the machine to the factory settings.

1. Turn off the device.
2. Press the power button for 15-20 seconds (before the indicator flashes in red).
3. Release the button and turn the machine on again.

💡

Most connectivity issues are related to Wi-Fi frequency incompatibility or an outdated version of the app. Always check these settings first!

Integration with a smart home: voice control and automation

If your machine supports Mi Home connectivity, it can be integrated into the smart home ecosystem, allowing you to control your device with voice or create automatic scripts, such as a timetable or with other devices (such as a vacuum cleaner).

Voice control:

• 🎤 For Alice (Yandex): add Xiaomi account in the Yandex Station settings and sync your devices. Then you can say, "Alice, turn on the clothes machine".
• 🤖 For Google Assistant: In the Google Home app, add Mi Home and select the typewriter you want".
• 🍎 For Siri: Mi Home application and setting through Shortcuts. Create a shortcut with the enable command.

Automation through Mi Home:

1. Open the application and go to the Automation (or Scenarios) section.
2. Click "Create a script" and select a condition (e.g. "Time" or "Geolocation").
3. Add the action: "Enable the machine for clothes" and adjust the settings (mode, working time).
4. Save the script and activate it.

An example of a useful scenario: the machine automatically turns on for 15 minutes every Monday at 10:00 a.m. when you clean, or starts with a Xiaomi robot vacuum cleaner after it returns to base.

💡

If voice commands are not working, check that the machine and smartphone are connected to the same Wi-Fi network. Also make sure that the Mi Home settings allow access to the microphone.

Tips for the effective use of the machine

To make the machine last a long time and cope with the coils as effectively as possible, follow these recommendations:

• 🧺 Preparation of fabric: before processing, turn the thing inside out (especially if the fabric is delicate). Spread the folds, so the blades will better capture the coils.
• ⚡ Mode selection: For thin fabrics (for example, cashmere), use the minimum speed. For dense materials (jeans, coats), maximum power will suit.
• 🔄 Direction of movement: Driving from top to bottom, not chaoticly, will prevent new coils from forming.
• 🚿 Cleaning after use: remove the fibers from the blades after each treatment. Use a brush from the kit or compressed air.
• 🔋 Charging and storage: keep the machine dry. Wireless models charge every 1-2 months, even if you don't use it so that the battery doesn't run out completely.

Critical: Never use the machine on wet or wet tissues, which will corrosion the blades and may cause short circuits (relevant to network models).

If the machine has started chewing cloth or leaves a pile behind, it is a sign of blunted blades. In most Xiaomi models, they can be replaced - look for original parts with the article specified in the instructions.

FAQ: Answers to Frequent Questions