Choosing a smart home assistant is a challenge that requires careful analysis of the technical specifications. The Xiaomi Mi Home ecosystem offers dozens of models, and it can be difficult to understand them the first time, especially when it comes to hybrid devices that combine dry and wet cleaning.
Not every robot can clean floors, not just wipe them with a wet wipe. For many users, it's critical to have automatic carpet lifting or water dosing, and these are the parameters that are often crucial when buying.
In this article, we will discuss in detail which robot vacuum cleaner Xiaomi is better at cleaning tasks, and what nuances should be paid attention to before paying.
Criteria for choosing a robot with a function of washing floors
When looking for the perfect wet cleaning device, the first thing to do is to evaluate the type of mat you use. Xiaomi's current models use systems ranging from simple vibrations to rotating discs. A static cloth only slightly moistens the surface, while active systems are able to wipe off dried spots.
The second important aspect is the water supply intensity, and the quality models have electronic adjustments that allow you to adjust the humidity level through the app, which is critical for different types of flooring: laminate requires minimal moisture, and granite can withstand more intensive washing.
Also (not to be ignored) is the question of autonomy: the wet cleaning process consumes more energy than dry cleaning, so the battery capacity should be sufficient to handle the entire area of the apartment without recharging.
💡
When choosing, pay attention to the presence of a water level sensor in the tank - this will prevent the device from working "dry" and spoiling the pump.
⚠️ Note: Do not use robot vacuum cleaners with wet cleaning function on high-pile carpets if the device does not have the function of automatic mop lifting.
Xiaomi’s top models for wet cleaning
The leader among hybrid devices for a long time remains the Xiaomi Robot Vacuum Mop series. These models have proven to be reliable “workers” with a good price-performance ratio. They are equipped with combined tanks, where water is supplied by gravity or under low pressure.
A more advanced segment is the vibrating platform, with the Xiaomi Vacuum Mop 2 Pro+ being a prominent feature, where the carpet vibrates at a high frequency, mimicking hand movements when washing the floor, which greatly improves the quality of cleaning from ingrained contaminants.
Flagship models like the Xiaomi Robot Vacuum X10+ or the Dreame lineup (part of the ecosystem) offer full-fledged rotating mops. The two discs spin in opposite directions, effectively cleaning the floor and collecting debris into the brush's reach.
- 🤖 Xiaomi Robot Vacuum Mop 2 Pro+ — Best choice for mixed-coated apartments.
- 💧 Xiaomi Vacuum Mop 2 Ultra – model with a self-cleaning base and hot mat drying.
- 🚀 Xiaomi Robot Vacuum X10+ — flagship with double rotating mops and laser navigation.
Comparative Characteristics Table
To make the decision easier, we've put the key parameters of popular models into a single table, and you can see how suction strength and water management differ.
| Model | Type of wet cleaning | Suction force (Pa) | Volume of water tank |
|---|---|---|---|
| Mop 2 Lite | Passive (spoken) | 2200 | 80ml |
| Mop 2 Pro+ | Vibrational | 3000 | 200 ml (electronic) |
| Robot Vacuum X10+ | Rotating discs | 4000 | 300 ml (automatic) |
| S10 | Vibration + lift | 4000 | 200 ml |
The table shows that budget models are limited to passive water supply, while top-end versions offer sophisticated mechanical cleaning systems. Electronic water level control is only found in the mid- and high-price segments.
💡
For large apartments with predominantly hard coatings (tiles, laminate), models with rotating mops will be more effective than vibrational analogues.
Setting up scripts in the Mi Home app
Once you buy it, you need to configure it properly. The Mi Home app allows you to create detailed maps of the room. For wet cleaning, it is critical to identify areas where the robot should not go, or vice versa, where you need to increase the washing mode.
You can choose the water level in the settings of the room, and there are usually three modes available: low, medium and high, and for the kitchen, where the probability of greasy spots is higher, it is recommended to set the maximum supply and double aisle.
You should also set up virtual walls, and if you have carpets that the robot can't recognize on its own, draw a no-go zone around them in dry-cleaning mode, or enable carpet-bypassing if supported by the model.
☑️ Wet cleaning setup
Remember to update the robot's firmware. Xiaomi engineers regularly release patches that improve the route and pump algorithms.
Maintenance and care of the water supply system
For a robot to last, you need to monitor the condition of the water tank. Using tap water can cause scale to form inside the pump and channels. It is recommended to use filtered or distilled water.
After each cleaning, especially if you added detergent, the tank should be rinsed. Residues of chemistry can dry and clog the outlet holes of the mat. The mat itself should be washed after 2-3 uses, so that it does not become a source of unpleasant odor.
⚠️ Attention: It is strictly forbidden to use aggressive cleaning products, chlorine or high foam products - this can disable the pump and filters.
How often do you change your bills?
If the robot has stopped supplying water, check to see if the outlet holes are clogged with a needle, and make sure that the contact between the tank and the body is clean and dry.
Frequent problems and their solution
Users often experience uneven moisture in the floor, which can be due to suffocation of the system, and to solve the problem, you take out the tank, shake it slightly, and set it back, making sure the valve opens.
Another common situation is that the robot gets lost on dark surfaces or black carpets, and the elevation sensors can perceive black as a cliff, and in such cases, it helps to paste the sensors with special tape (if the model allows) or create virtual walls around problem areas.
If there are stripes on the floor, check the contamination of the mat. Too wet or too dirty mat will not be able to perform the task properly. Try to reduce the water supply level in the application settings.
- 💧 Water leakage: check the integrity of the rubber tank plug.
- 🔇 Noise pump: normal phenomenon at work, but humming without water supply indicates a malfunction.
- 📉 Weak pressure: Clean the water supply channels with a thin wire or needle.
Timely diagnosis avoids costly repairs, and regular cleaning of sensors and contacts is key to a smart home.