What is the password from the Xiaomi Yi camera: a complete security guide

Many security camera owners have trouble accessing a device when they forget the data they have set or don't know the factory settings. The question of what password the Xiaomi Yi camera has is one of the most common in technical support. The standard situation is you bought a device, turned it on, but the app requires code you don't have, or the camera writes about the need to enter credentials.

It is important to understand that there is no single universal code for all devices, since the brand’s security policy implies individual protection of each gadget. However, there are standard factory values that are prescribed by the manufacturer for initial activation.

Next, we’ll take a look at all possible password options, how to recover them, and how to completely reset your device to factory settings. You’ll learn how to correctly identify your model and what steps to take if standard methods don’t work. Xiaomi Yi is a popular line of devices, and knowing the nuances of their protection will help you quickly regain control of your home’s security system.

⚠️ Warning: Attempting to select a password by brute-force can lead to temporary blocking IP-The address or device itself is protected by a security system.

Standard passwords and factory settings

When you first turn on the Xiaomi Yi Home camera or older Yi Outdoor models, the device often does not have a user-defined password, in which case the input field may remain empty, or the system will prompt you to come up with a new code immediately after connecting to the Wi-Fi network, a basic level of protection that is valid until the owner first logs in.

However, if the camera was reset to factory settings or you are trying to connect to it directly via a local area network, standard data may be required. A common option is a combination of 12345 or 123456. These values are sewn in the factory to facilitate the initial configuration.

In some firmware modifications, especially in the international versions (Global Version), the default password may be completely absent, in which case, when requesting authorization in the application or web interface, you just leave the field blank and press the login button. If the device requires mandatory input, try to enter MAC-camera address, indicated on the sticker at the bottom of the case, in the upper register.

The Wi-Fi password of the network the camera is connecting to is not to be confused with the device's administrator password, the local password is to access the camera settings, while the Wi-Fi key provides Internet access, and confusion is a common cause of setup errors.

Where to find unique data on the device body

Each Yi Technology device has a unique identifier and often a personalized password printed on a special label, which is usually placed on the bottom of the case or on the back, next to the microSD card jack, and ignoring this information leads to unnecessary resetting actions.

There are several fields that you should be interested in on the label, first of all, Device ID and Verification Code, and Verification Code is often the default password when you connect your camera to a router or when you try to access remotely, and the code is a set of 6-8 Latin letters and numbers.

• 🔍 Carefully inspect the bottom of the camera: the sticker may be protected by a layer of dust or be poorly readable due to wear and tear.
• 📱 Take a photo of the label immediately after purchase: this will save data in case the sticker is erased over time.
• 🆔 Don't mix it up. MAC-Address and Verification Code: They are close by, but have different formats and purposes.

If the sticker is missing, damaged or unreadable, it will be extremely difficult to restore access using standard methods, in which case the only solution is a full reset, which will return the factory settings, but require physical manipulation of the reset button.

💡

If the sticker is erased, try looking into the box from the device: sometimes a duplicate of the information with the serial number and codes is pasted on the end of the package.

Complete Reset (Hard Reset)

If standard passwords don’t fit and label data is lost, the only working option is forced resetting, which puts the Xiaomi Yi camera back out of the box, removing all user settings, including forgotten passwords and binding to your Mi Home account.

To do the reset, find a small hole on the camera body, signed as Reset. It is usually located next to a memory card slot or power connector. You will need a thin object, such as a paper clip or toothpick, to press the hidden button inside the hole.

The process is as follows: turn the camera on, wait until the boot is completed (usually about 1-2 minutes), press and hold the reset button. After 10-15 seconds, the camera will emit a characteristic audible signal or voice message in English or Chinese (for example, "Reset successful").

⚠️ Note: During the reset procedure, do not turn off the power to the camera. Interrupting the process during the recording of configuration files can lead to a software failure ("brick"), after which recovery will only be possible through the programr's flashing.

After a successful reset, the camera will again broadcast a Wi-Fi signal with a name containing YI and numbers, and you can now connect to it again using a standard password (if required) or through automatic settings in the application, as in the first run.

Setup via Mi Home and Yi Home

Modern Xiaomi Yi cameras are controlled primarily through mobile applications. There are two main applications: the official Yi Home (for the global market) and Mi Home (for the Xiaomi ecosystem), the choice of application depends on the region where your camera is sharpened.

When you add a device to an application, the authorization process is automatic. QR-If the camera requires a password to pair, the application often substitutes it automatically or asks for Verification Code input, which you can read from the sticker.

In the security settings inside the app, you can change the access password. This is recommended immediately after you install the camera. Go to Settings → Security → Device Password. Here you can set complex code that you will remember, or save it in the password manager.

💡

Changing the factory password immediately after setting up is a critical step, as the standard codes are known to all attackers and are in open databases.

Solving Common Access Issues

Even if you know the right password, you can have login errors, and often the problem is not the code itself, but the network settings or the firmware version, for example, the camera may not accept the password if the time on the device and phone is very out of sync, which prevents the encryption protocols from working properly.

Another common problem is character restriction: Some older Yi models only support passwords of a certain length (e.g., strictly 6 or 8 characters). If you type in too long or short a code, the system may produce an error called "Incorrect password," even though it is technically just not suitable for the format.

• 📡 Check Wi-Fi range: Many Xiaomi cameras only work on 2.4GHz networks and don’t see 5GHz networks, which can block the authorization process.
• 🔄 Update: Older Mi Home versions may not handle new camera password requests correctly.
• 🌐 Change region: in the app settings, try switching the region from China to Russia or Europe if the camera is global.

If the camera says "Device is busy" or "Password is incorrect" after several attempts, the retrieval protection may have worked, in which case you need to wait 15-30 minutes without trying to log in or reboot the camera through a power outage.

Questions and Answers (FAQ)