Modern living climates often require additional humidity control, especially in winter or dry regions. Xiaomi devices have proven to be reliable and technologically advanced assistants that can quickly normalize the microclimate in your apartment. However, the first inclusion of a smart gadget often raises questions among new users who are accustomed to simpler household appliances.
In this article, we will discuss how to properly prepare, start and configure your new humidifier. It is important to understand that the correct initial setup affects the durability of the device and the accuracy of its sensors. We will look at both basic physical connectivity and integration into the smart home ecosystem through the Mi Home app.
Following the instructions will help you avoid common mistakes, such as water leaks or sensors that are not working properly, and you will learn not just to turn on the device, but to control it remotely, creating a comfortable environment before you get home.
Preparation of the device for the first launch
Before connecting the device to the power grid, a number of preparatory actions must be performed with the housing and tank itself. Packaging materials such as protective films or locking tapes must be completely removed so as not to damage the mechanism during operation. Particular attention should be paid to the interior of the water tank, where the transport sponge may be located.
Often beginners forget to remove a special filter sponge from the tank, which leads to a blockage of water supply and overheating of the pump. This sponge is designed solely to fix internal components during delivery and is not needed during operation. If you ignore this step, the device may not work correctly or make extraneous sounds.
⚠️ Warning: Never turn on a humidifier without water in the tank, as this can cause the ultrasonic membrane or heating element to fail depending on the model.
After all foreign objects have been removed, thoroughly rinse the tank with clean room temperature water.The use of hot water or aggressive washing chemicals is strictly prohibited, as this can deform the plastic or leave a toxic trace.Let all components dry or simply shake off the excess moisture before assembly.
Assemble the device by placing the tank on the base according to the instructions. Make sure the water supply valve fits tightly and is not skewed. Only after complete assembly and checking for visible defects can you proceed to the next step - filling with water and connecting to the network.
Filling with water and choosing a liquid
The quality of the water used directly affects the life of the humidifier and the quality of the indoor air. Xiaomi and Smartmi recommend using purified or distilled water, especially for ultrasonic models. This is because hard water contains calcium and magnesium salts, which form a white coating on furniture and clog filters.
If you use tap water, be sure to filter it through a household filter jug or reverse osmosis system. Mineral deposits over time reduce the efficiency of evaporation and can become a medium for bacteria to multiply inside the tank. Regular water replacement is also a prerequisite for maintaining hygiene.
💡
Use distilled water to completely eliminate the appearance of white plaque on furniture and extend the life of the demineralization cartridge.
Fill the tank with water to the MAX mark, but do not overflow above the permissible level. Overflow can lead to water entering the electronic components of the base, which will cause a short circuit. Once filled, tightly twist the tank cover and turn it over to install on the base, making sure that the connection is tight.
- 💧 Use distilled or filtered water for maximum life.
- 🚫 Avoid adding essential oils directly to the water unless the model has a special compartment.
- 🔄 Change the water in the tank daily to prevent stagnation and odor.
- 🧼 Wash the outer surfaces with a soft dry cloth at each refill.
Physical connection and first inclusion
Install the humidifier on a flat, horizontal surface, preferably at least 30 cm from walls and furniture. This will ensure free air circulation and proper operation of humidity sensors. Electrical safety also plays an important role: use only the original power cable and serviceable sockets with grounding.
Connect the power cable to the device-based connector, then plug the plug into the socket. Immediately after the connection, many models will emit a short beep or light indication confirming the power supply. At this stage, the device usually goes into standby mode or starts automatically if the settings were saved earlier.
To force it, press the power button on the case or the touch panel. Depending on the model, a short-term press can turn on the device, and a long-term press can change the modes of operation or activate Wi-Fi. Study the symbols on the control panel to understand the current status of the device.
☑️ Pre-insertion check
If the indicators don't light up, check the contact density of the cable in the base connector. Sometimes the connector can enter tightly, and a stronger but more accurate press is required until a characteristic click. Lack of reaction can also indicate a faulty cable or power supply, which requires contacting the service center.
Registration in the Mi Home app
To fully manage the functionality, you need to link the device to your smartphone through the Mi Home app (or Xiaomi Home). Download the current version of the application from the App Store or Google Play and create an account if you have not already done so. The account region must correspond to the region for which the device is intended (often China or Europe), otherwise the gadget may not be determined on the network.
After authorization, click the add device button in the upper right corner of the screen. the application will prompt you to scan. QR-code on the package or find the device in the list automatically. Make sure that the smartphone is enabled Bluetooth and geolocation, as they are used for the initial setup and transfer of Wi-Fi data.
⚠️ Warning: Make sure your smartphone is connected to a 2.4GHz Wi-Fi network.Most Xiaomi smart home devices don't support 5GHz networks during the setup phase.
Follow the instructions on the screen: select your Wi-Fi network, enter your password, and wait until the pairing process is complete, while the Wi-Fi indicator on the humidifier can flash, signaling a connection attempt, and once you successfully connect, you can rename the device and assign it a room in the application interface.
If the automatic search didn’t work, try resetting the Wi-Fi settings on the device itself, usually by pressing two buttons on the case at the same time or holding the setting button for a long time for 5-7 seconds before the beep.
Set-up of work modes and scenarios
Once successfully connected, you can access advanced settings that are not available through buttons on the case. In the application, you can set a humidity target, for example, 50% or 60%, and the device will automatically support it, turning on and off spraying, which provides energy savings and a comfortable microclimate without your involvement.
Of particular interest is the Night mode, which turns off the display backlight and minimizes fan noise, activating this mode on schedule or through the light sensor allows you to use a humidifier in the bedroom without disturbing sleep with bright light indicators. Schedule setting is available in the app's timers section.
Secret functions in the annex
Integration with voice assistants like Yandex Alice, Google Assistant or Siri allows you to control your voice humidifier, and you need to link your Mi Home account to the appropriate skill in the assistant app, and you can then command, "Enable the humidifier" or "Enable the humidity of 45%."
Creating automation scenarios opens up new possibilities, like running a humidifier when you open a smart window or lowering humidity below a predetermined threshold, which make the system truly smart and eliminate the need for manual control.