How to run a robot vacuum cleaner Xiaomi on wet cleaning: a complete guide with nuances

Xiaomi vacuum cleaners are no longer just smart brooms — the modern Mi Robot Vacuum-Mop 2 Pro, DreameBot D10 Plus or Viomi V3 models combine dry and wet cleaning, turning into full-fledged home assistants. However, many users face problems when they first start wet cleaning: the rag remains dry, the robot ignores the washing areas, then after cleaning the floor, there are divorces. In this article, we will analyze all the stages of preparation and launch – from the choice of the mode in the Mi Home app to the subtleties for different types of coating.

What's special about Xiaomi robots is that they require the right sequence of actions: it's not enough just to pour water into the tank, you have to consider the type of flooring, the degree of contamination, and sometimes the version of the firmware of the device. LDS-Laser (like the Mi Robot Vacuum-Mop P) wet cleaning automatically turns off on carpets, whereas low-end versions without a laser can try to wash them, risking spoiling the coating. We will analyze the unique settings for each line of Xiaomi robots, so that you avoid typical errors and get perfectly clean floors.

1.Preparing robot vacuum cleaner for wet cleaning

Before the first wet cleaning operation, you need to check the equipment and condition of the accessories. Even if you bought a robot recently, the manufacturer may not have equipped it with all the necessary parts - especially for models from China, where they often save on trifles.

Here's what should be available:

• 🧺 Mope nozzle (usually included, but may require separate installation).
• 💧 Water tank (in some models, such as DreameBot) Z10 Pro, it's combined with a dust collector).
• 🧼 Cleaning agent (not necessarily branded, but should be specifically for robot vacuum cleaners).
• 🔧 Cloth fasteners (plastic clamps or Velcros that are often lost in the first washing).

Pay special attention to the wet cleaning cloth. In cheap kits it can be too thin or syntepon - such quickly become disrepaired and leave divorces. The best option is a microfibre with a density of at least 300 g / m2. It can be bought separately (for example, a rag from Roborock S7 will suit the Viomi V2).

💡

If your Xiaomi robot vacuum cleaner suddenly stopped spraying water, check the sprayer hole - often it gets clogged with scale. Clean it with a toothpick or rinse it in vinegar solution (1:1 with water).

2. Installation of accessories: step-by-step instructions

Now, let's get to the practice, first you need to install all the wet cleaning elements correctly, and the process may vary slightly depending on the model, but the overall pattern is the same.

Sequence of action:

1. Remove the dust collector (if it is removable) and make sure there is no debris inside.
2. Attach a mop platform to the bottom of the robot. In Mi Robot Vacuum-Mop 2, it is fixed with latches, in DreameBot, with screws (come with the kit).
3. Put a cloth on the platform. It should fit tightly, without creases.
4. Fill the water tank only to the MAX mark (usually 200-250 ml).
5. Add a detergent (no more than 10 ml per liter of water), if this is provided by the instructions.

A mop platform has been installed|The cloth is secured without folds|The tank is full to mark. MAX|Cleaning agent added (if necessary)|Battery charged at least 50 times%-->

Importantly, electronically controlled models such as the Viomi V3 cannot use tap water, only distilled or boiled water, otherwise the sensors will quickly fail due to scale.

Mi Robot Vacuum-Mop 2 Pro|DreameBot D10 Plus|Viomi V3|Roborock S7|Another model-->

3. Set up wet cleaning in the Mi Home app

Without the right settings in the app, the robot will either not wash the floors or will do it inefficiently. Consider the process using the Mi Home example (Dreame and Viomi use their proprietary applications, but the logic is similar).

How to turn on wet cleaning:

1. Open Mi Home and select your robot vacuum cleaner.
2. Go to the Cleaning section → Cleaning settings.
3. Activate the option Wet Cleaning (in some firmware it is called Mop Mode).
4. Choose the intensity of the washing: 🌊 Weak - for easy cleaning (dust, small garbage). 💦 Medium - for standard contamination (divorces, stains). 🌪️ Strong - for persistent contamination (footprints, sticky spots).

Save.

In mapping models (e.g. Mi Robot Vacuum-Mop P), wet cleaning areas can be defined:

1. In the application, open the room map.
2. Click Add the area and circle the area that needs to be washed.
3. Select the mode Only wet cleaning or Dry + wet.

4. Wet cleaning modes: which one to choose?

Xiaomi robots offer several wet cleaning modes, and the choice depends on the type of coating and the degree of contamination.

⚠️ Note: If you have a robot without a humidity sensor (such as Mi Robot Vacuum-Mop Essential), never use intensive mode on wooden floors.Excess water can cause the coating to bloat, especially if the joints between the boards are not sealed.

For the kitchen or bathroom with tiles, it is better to choose an intensive mode, but after cleaning, be sure to wipe the floors dry - the robot does not absorb all moisture, and drops remain on glossy surfaces.

5. Common Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when cleaning wet, and here are the most common problems and solutions:

• 🚫 Robot doesn't spray water: Check if the tank is installed correctly (must click). Clean the sprayer - it gets clogged with dust often. Update the firmware - in older versions there is a bug with a pump.
• 💦 After cleaning, there are stains left: Use distilled water or add 1 tsp of vinegar per liter for softening. Change the cloth to a long-pile microfiber. Reduce the spray intensity in the settings.
• 🔋 The robot discharges quickly: Wet cleaning consumes 20 to 30 percent more energy. Charge the battery to 100 percent before starting. Limit the cleaning area - don't wash the whole apartment at a time.

⚠️ Warning: If your Xiaomi robot vacuum cleaner starts beeping and flashing red during wet cleaning, it is a signal that the pump is overheated.Switch it off immediately and let it cool for 10-15 minutes.A frequent reason is using too hot water (optimal temperature: 20-30)°C).

💡

Before the first wet cleaning, always test the robot on a small area of the floor (for example, in the hallway), which will help to avoid damage to the coating if something goes wrong.

6.Care for robot after wet cleaning

To make the robot vacuum cleaner last longer, after every wet cleaning, you need to do maintenance, and many people neglect this, but it's the wrong care that causes the pump or the sensors to break down.

What to do after cleaning:

• 🧼 Rinse the water tank with warm water and dry it, and if you leave the water inside, you'll eventually get mold.
• 🧺 Remove and wash the rag by hand (not in the washing machine!) with a soft detergent.
• 🔧 Clean the sprayer - just blow it or wash it under a stream of water.
• 🔋 Put the robot on the base to recharge. Wet cleaning puts a lot of battery life on the battery.

Once a month, a deep cleaning is recommended:

1. Remove the moping platform and rinse it under running water.
2. Clean the contacts of the sensors with a cotton swab soaked in alcohol.
3. Check rollers and brushes - they can wind hair or thread, which worsens the quality of cleaning.

⚠️ Warning: Never use abrasives (such as soda solution or hard brushes) to clean the robot, which will damage the corrosion-resistant coating of metal parts and lead to rust.

7. Comparison of Xiaomi models on wet cleaning quality

Not all Xiaomi robot vacuum cleaners are equally good at wet cleaning, and we tested several popular models and ranked them on key parameters.

If you want maximum efficiency, look for the DreameBot D10 Plus, which is equipped with a double-rotation rag system that allows you to wash even persistent stains. For a budget option, Mi Robot Vacuum-Mop 2 Pro will suit, but be prepared for the fact that in highly contaminated areas you will have to twist manually.

FAQ: Frequent questions about wet cleaning by Xiaomi robot