How to properly start the vacuum cleaner Xiaomi 1S: from unpacking to first cleaning

First launch of Xiaomi Mi Robot Vacuum 1S: where to start?

Xiaomi Mi Robot Vacuum Vacuum 1S — One of the most popular cleaning robots in the budget segment, but even experienced users sometimes have questions when they first turn on, and the main mistake of beginners is trying to immediately press the power button without getting the device ready for operation. As a result, the vacuum cleaner either does not respond to commands, or begins to move randomly without communication with the application.

This guide will help you avoid the typical problems, from unpacking the box to setting up a cleaning schedule, and we'll take a step-by-step start-up algorithm, the Mi Home connection, and give you tips on how to optimize the vacuum cleaner depending on the type of coating, and if you've tried to turn on the device, but it gives you an error, there's a solution section at the end of this article.

Important: Xiaomi 1S It is different from newer models (for example, 1T or S7) So, you can use a firmware and a set of sensors, and the instructions for other versions might not work. 1S no laser rangefinder (LDS), So the maps of the rooms are built on the gyroscope and the sensors of the collision.

Unpacking and configuration check

Before first switching on, make sure the box has all the necessary items. standard Xiaomi Mi Robot Vacuum trim 1S include:

• 🤖 The robot vacuum cleaner itself with a battery installed
• 🔌 Charging station (dock station) with a power supply unit
• 📄 Instructions in Chinese/English (no Russian version)
• 🧹 Removable garbage container and HEPA-filter
• 🔧 A set of spare brushes (1 side brush) + 1 basic)
• 📏 Limter space (virtual wall, 1 pc.)
• 🧼 Cleaning brush for vacuum cleaner care

⚠️ Note: If the box does not have a docking station or power supply, this is not a complete set for the Russian market. 220V→100V) or firmware.

Check the integrity of the sealing gums on the garbage container, which often fit loosely after transportation, and also inspect the side brush, which should rotate freely with light touch.

Preparation of the vacuum cleaner for the first switching on

Before connecting the vacuum cleaner to the socket, follow several mandatory steps:

1. Install the vacuum cleaner in the docking station. The contacts on the robot body should match the metal plates at the station. If the vacuum cleaner does not "magnetize" - check if the contacts are contaminated with protective film (it should be removed!).
2. Connect the power supply to the dock. The connector must be inserted before the click. - Xiaomi 1S It has no built-in battery in the station – the power comes directly from the network.
3. Make sure the side brush is installed. It's attached to the latch on the right (when you look at the vacuum cleaner in the front), without it, cleaning along the walls will be inefficient.
4. Check the position of the main switch. It's located on the side panel under the lid and should be in position. ON (orange-mark).

⚠️ Warning: If the vacuum cleaner does not respond to the press of the power button, but the indicator at the station is on, the problem may be a discharged battery. In this case, leave the device on charge for 4-6 hours before the first turn on.

I put a vacuum cleaner in the dock.|I connected the power supply to the socket.|Checked the sidebrush.|Turned on the main tumbler on the body.|I took the security tapes off my contacts.-->

Start and basic configuration without an application

You can use the Xiaomi vacuum cleaner 1S without connection to Mi Home, but in this case will not be available:

• 🗺️ Cleaning and zoning maps
• 📅 Schedule
• 📊 Cleaning statistics
• 🔧 Adjustment of suction power

For baseline launch:

1. Press and hold the power button on the top panel for 3-5 seconds until the voice alert (in Chinese) sounds and the white indicator flashes.
2. Press the button again briefly – the vacuum cleaner will start cleaning in Standard mode (average power).
3. To stop, press the button once, to return to base - hold 2 seconds.

In a no-app mode, the vacuum cleaner will be randomly cleaned, without taking into account the map of the room, which can lead to skipping zones or getting stuck in narrow passages.

Connection to the Mi Home application: step-by-step instructions

For full operation of the vacuum cleaner, be sure to connect it to the Mi Home application (available for Android and iOS).

• 📱 Set up a cleaning schedule
• 🗺️ Keeping maps of premises
• 🔧 Select suction modes (Quiet, Standard, Turbo)
• 🚫 Install virtual walls and cleaning areas

Connection algorithm:

1. Download Mi Home from the official store (App Store or Google Play). APK — They may contain viruses.
2. Sign up or sign in to an existing Xiaomi account.Accessing a vacuum cleaner to your account is a must!
3. Press. + → Addition of a device → Quick addition.
4. Choose the category of vacuum cleaners and the model Mi Robot Vacuum 1S.
5. Make sure the vacuum cleaner is on (the white light flashes) and is near the phone.
6. Connect your phone to a 2.4GHz Wi-Fi network (5GHz is not supported!) Enter the network password in the app.
7. Wait for the sound signal from the vacuum cleaner - this is a confirmation of a successful connection.

⚠️ Warning: If the vacuum cleaner doesn't connect to Wi-Fi, try it:

• 🔄 Reboot your router (especially if you have a dual-band network).
• 📵 Shut down. VPN or a proxy on the phone.
• 🔌 Move the vacuum cleaner closer to the router (maximum distance - 5 meters).

💡

If you have a router with a separate network of 2.4 and 5 GHz, temporarily turn off 5 GHz in the router settings while you connect the vacuum cleaner. After adding to Mi Home, you can return the settings back.

Setup of the first cleaning: modes and parameters

After connecting to the application, calibrate the sensors:

1. Place the vacuum cleaner on a flat surface (not on the carpet!).
2. In the app, go to Settings → Calibration of the gyroscope.
3. Wait for the process to be completed (the vacuum cleaner will rotate in place).

Without calibration, the room map can be built with distortions.

You can now set the cleaning parameters:

• 🌪️ Suction mode: Quiet - quiet (for night cleaning, weak power) Standard - standard (optimal for laminate / tile) Turbo - maximum (for long-pile carpets)
• 🗺️ Type of cleaning: On the area - consecutive cleaning with zigzag Along the walls - priority cleaning of the boards Local - cleaning within a radius of 1.5 m from the vacuum cleaner

For test cleaning:

1. In the app, click Cleanup. → Start.
2. Select Standard mode and Type By Area.
3. Close the doors to other rooms so the vacuum cleaner doesn't go far from the base.

The first cleaning can take up to 40-60 minutes – this is normal, since the vacuum cleaner builds a map of the room.

Deciphering errors and solving problems

If Xiaomi vacuum cleaner 1S emits an error, the indicator on the case flashes red, and a notification appears in the application - use this table for diagnosis:

⚠️ Warning: If the vacuum cleaner gives error 9 (fan problem), do not try to disassemble it yourself - this may lead to loss of warranty.

Another common problem is that the vacuum cleaner doesn't return to base.

• 🔋 The docking station is not connected to the outlet (check the power indicator).
• 🚪 Obstacle in the way (e.g., a closed door or a high threshold).
• 📡 Weak Wi-Fi signal (vacuum cleaner loses communication with the application).

Solution: Move the docking station to a more accessible location or use the Base Search feature in the app.

Operational tips: how to extend the life of a vacuum cleaner

To Xiaomi 1S You have served longer, follow these recommendations:

• 🧹 Clean the garbage container after each cleaning.The dust residue reduces the suction power.
• 🔄 Change. HEPA-filter every 3-6 months, clogged filter increases engine load.
• 🔋 Do not leave the vacuum cleaner on charging for more than 24 hours.Constant connection to the network reduces battery life.
• 🚫 Avoid cleaning on wet surfaces. - Xiaomi 1S It has no water protection!
• 📱 Update your firmware through Mi Home.New versions improve navigation and add features (like Alice's voice support).

For cleaning carpets with long pile:

1. Set Turbo mode.
2. Reduce the speed of the vacuum cleaner in the settings (Settings) → Speed. → Low).
3. Use the space limiter to limit the cleaning area (otherwise, the vacuum cleaner may get stuck).

💡

Regular cleaning of sensors (front and bottom) is the key to accurate navigation, and the dust on the sensors leads to chaotic movement and skipping zones.

FAQ: Frequent questions about Xiaomi Mi Robot Vacuum 1S