How to turn off the robot vacuum cleaner Xiaomi: step-by-step instructions

Managing today’s smart appliances often raises questions for new users, especially when it comes to basic features such as completely shutting down the device. Owners of Xiaomi robot vacuum cleaners and the Roborock ecosystem often face a situation where the usual button on the case does not respond as expected, or the device continues to buzz in standby mode. Understanding the logic of battery operation and control system is necessary for proper operation and safety.

There are several scenarios where you'll need to stop the unit, from a simple pause during cleaning to a complete shutdown before a long drive. Unlike conventional appliances, there's often no physical break of the circuit with a single button, as the device is designed to be always on schedule. We'll take all the nuances out so you can confidently manage your appliances.

It is important to distinguish between stopping cleaning and turning off power, because these actions lead to different results in the electronics. If you just stop the cycle, the robot can continue scanning the room or waiting for a command, consuming energy.

Differences between a pause and a complete shutdown

The first thing that a smart gadget owner needs to learn is the difference between a software stop and a physical shutdown. When you press the power button short, you usually put the device in Standby mode or pause the current task, in which the microprocessor continues to work, waiting for signals from sensors or commands from the application.

Shutting down completely means that the main nodes are no longer powered, except perhaps the charging waiting system, which is critical if you plan to stay off the device for a long time, such as going on vacation. In normal operation, the device always remains connected to the base and ready to start.

⚠️ Warning: Long-term storage of a fully discharged lithium-ion battery can cause it to deteriorate and bloat, so don’t leave the device off for months without recharging.

Many users confuse these modes, believing that the silent robot is turned off, while it is just waiting for a command, the indication on the body or voice messages will help determine the current status of the system.

Standard procedure for switching off through the power button

On most models, such as the Roborock S5, Roborock S6 or Xiaomi Vacuum Mop, the algorithm of actions is the same. To completely turn off, you need to press and hold the power button for a certain time, usually this interval is from 3 to 5 seconds, which protects against accidental shutdown during active cleaning.

When you hold it, you hear an audible signal or voice confirmation, and then all the indicators go out, which means that the system unit has gone into deep sleep or completely shut down. It is not recommended to release the button ahead of time, as this can start Spot mode or just pause the task.

It's worth noting that on some modifications, such as the Mi Robot Vacuum Mop 2, the logic may vary slightly depending on the firmware version. If a short press pauses, a long one turns off. In rare cases, double pressing or a combination of buttons is required, as indicated in the manual of a particular modification.

💡

If the power button does not respond to a long press, check if the control panel is blocked through the application, as the child protection feature can block the physical interface.

Managing Power through the Mi Home App

Digital control provides more flexible settings than physical buttons. In Mi Home or Roborock, you can not only stop the current cleaning, but also control the modes of operation of the engine. However, the Hard Power Off feature in the standard interface is often not available, as developers assume that the device is always ready.

However, you can send a command to return to base, and then the device goes to sleep, which is the safest way to stop work if you are far from home, and the app allows you to see the actual charge level and status of the connection to the Wi-Fi network.

Using automation scenarios, you can set the device up so that it automatically returns to base at a certain time, and this is an indirect way of shutting down the active phase of operation, and remote control ensures that the device does not start to make noise in your absence.

Features of switching off different models Xiaomi and Roborock

Xiaomi’s product line is extensive and each series has its own design features. For example, in the Roborock S7 model, the power button is located on top and has a tactile response, while in the Mi Robot 1S it can be combined with other functions. In flagship models with a wash function, the switch-off algorithm may require the pre-lift of the carpet nozzle.

The Vacuum-Mop series often have a separate water tank switch, but this does not affect the overall power supply. In older models, such as the first generation, there was sometimes a physical switch on the bottom panel that completely broke the battery circuit.

⚠️ Attention: On models with laser rangefinder (LDS) It is not recommended to turn off the device during the construction of the map, as this can lead to loss of data on the layout of the room.

If you have a model with an autonomous self-cleaning station, the shutdown process may be related to the discard cycle, and wait until this process is complete before you turn off the appliance to avoid getting stuck in the turbine channels.

Emergency disconnection and battery retraction

There are times when the software doesn't work, the device is stuck, the button is not responding, or there's a malfunction in the electronics, and then the only safe way to do that is to mechanically shut down the power, and you have to flip the robot vacuum cleaner over and access the bottom panel.

At the bottom of the device, there are usually screws that hide the battery compartment. Using a cross screwdriver, carefully remove the lid. Inside, you will see a connector connecting the battery to the main board. Disconnecting this plume is guaranteed to de-energize the device. This action must be done carefully so as not to damage the contacts.

This method is recommended only in emergency cases or before long-term storage. Once the battery is removed, the device is guaranteed not to turn on, even if it hits water or there is a surge in voltage in the network (if it is not on the base), This is the only way to ensure 100% safety during transportation or repair.

Storage mode and preparation for long downtime

If you plan to not use a robot vacuum cleaner for a month or more, turning off the battery properly is critical to the health of the lithium-ion cell. The ideal charge level for storage is 60-70%. Fully charging or fully discharging the battery before hibernation is harmful to its chemical structure.

After turning off the device and, if necessary, turning off the battery, clean the dust container and wash the filters. Wet elements such as a floorwashing cloth or the water tank itself should be removed and dried to avoid mold and unpleasant odor inside the case.

Store the device in a dry place at room temperature. Direct sunlight or frost can damage the plastic and display. Periodically, every 2-3 months, it is recommended to connect the device to the network and give a small charge to keep the chemical processes normal.

💡

For long-term storage, it is optimal to turn off the battery physically and leave the charge at 60%, checking its condition once a quarter.

Frequently Asked Questions (FAQ)