The Xiaomi Vacuum Mop Pro has become an indispensable cleaning assistant, but even such a smart device has nuances of control. Many users are faced with the question: "How to turn off the vacuum cleaner correctly so as not to land the battery and not break the mechanisms?" The fact is that the manufacturer does not always obviously place this feature - neither in the instructions nor in the interface of the Mi Home application.
In this article, we'll look at all the possible ways to turn off the device, from a standard button-off to a forced reset in an emergency, and we'll also look at whether to turn off the robot vacuum cleaner at night, how it affects battery life, and what to do if the device doesn't respond to commands. Spoiler: a complete power outage is extremely rare, but knowing all the control methods is useful for every owner.
Let's start with the simplest thing, mechanical shutdown, but don't press the button: Vacuum Mop Pro has several modes of operation, and not all of them imply a complete shutdown. For example, standby consumes minimal charge, but allows the vacuum cleaner to quickly respond to the cleaning command through the app. Deep sleep uses almost no energy, but also wakes up longer.
1. Standard switch off button on the body
The most obvious way is to use a physical power button on the case. On the Xiaomi Vacuum Mop Pro, it's located on the top panel, next to the Home button, to turn off the vacuum cleaner:
🔹 Press and hold the power button. 3-5 So you hear a beep (one short beep) and the light goes off, which means that the device is completely powered off.
⚠️ Warning: If you just press the button once (short press), the vacuum cleaner won't turn off, it will only stop cleaning or go into standby mode!
Once completely shut down, the robot will not respond to voice commands, the Mi Home app, or pressing touch buttons. To turn it on again, you will need to hold the power button. 2-3 second-to-beep.
2. Shutdown via the Mi Home app
If the vacuum cleaner is connected to Wi-Fi and synced to the application, you can turn it off remotely.
1. Open Mi Home and select your Xiaomi Vacuum Mop Pro from the list of devices.
2.On the main control screen, press three dots (⋮) top-right.
3. From the menu, select "Switch off" (or Power Off in English).
🔹 Important nuance: This method does not always work if the vacuum cleaner is in the process of cleaning or stuck. In such cases, the application may show an error Device busy").
Also in Mi Home you can configure automatic shutdown on schedule:
- 📅 Cleaning schedule: Set a time to complete the work, after which the vacuum cleaner will return to the base and go to sleep mode.
- ⏳ Sleep timer: In the device settings, you can specify how many minutes of inactivity the robot should "sleep" (for example, 30 minutes after cleaning is finished).
Check that the vacuum cleaner is not in the cleaning process|
Make sure it is on a base or flat surface.|
Close the Mi Home app after shutting down so you don’t waste your phone’s charge|
If the vacuum cleaner doesn’t respond, try reconnecting it to Wi-Fi.-->
3. Standby and energy saving modes: when you do not need to turn off
Xiaomi Vacuum Mop Pro supports several resting states that save battery power, but allow you to quickly resume work.
🔋 Standby mode (Standby):
- 🔄 The vacuum cleaner consumes ~1-2% Charges per day, but ready to start cleaning on command.
- 📱 Responds to app, voice commands (if connected to Alice or Google Assistant).
- ⚡ It is activated automatically after cleaning or when setting to base.
💤 The Deep Sleep (Deep Sleep):
- 🔋 Energy consumption is reduced to ~0.5% per day.
- ⏳ "Awakening" takes 5-10 Seconds (to wake the vacuum cleaner with a button or command).
- 🔌 Activated if the vacuum cleaner is idle for more than 24 hours without recharging.
⚠️ Attention: If you are away for a long time (for a week or more), it is better to turn off the vacuum cleaner completely or at least put it on the base.
| Regime. | Consumption of charge | Time of reaction | When to use |
|---|---|---|---|
| Total shutdown | 0% | 3-5 sec (onsetting by button) | Long-term downtime, transportation, repair |
| Standby | 1-2% per day | Instantly. | Daily use |
| Deep Sleep | 0.5% per day | 5-10 seconds | Simple 1-3 days |
| On the base. | 0.1-0.3% day-to-day | Instantly. | The best option for storage |
Emergency shutdown: if the vacuum cleaner is getting stuck or unresponsive
Sometimes the Vacuum Mop Pro can freeze, like when you're in a navigational error, you're in a firmware failure, you're in a Wi-Fi problem, and in those cases, the standard methods don't work. Here's what you do:
🔧 Soft reset (soft reset):
- Press and hold the power button. 10-15 seconds until the vacuum cleaner emits two short signals.
- Release the button – the device will restart (this can take up to 1 minute).
⚡ Hard reset (hard reset):
- 🔌 Turn off the vacuum cleaner from the power: Remove it from the base and remove the battery (if you know how to disassemble the case).
- ⏱️ Wait. 5-10 minutes, then insert the battery back in.
- ⚠️ This method resets all settings (room maps, schedules), use only as a last resort!
🛠️ If the vacuum cleaner is stuck and does not turn off:
- 🏠 Move it manually to a flat surface (not on a carpet!).
- 🔄 Try a soft reset.
- 📱 Reconnect to Mi Home (forget the device) → add).
What to do if the vacuum cleaner does not turn on after discharge?
5. Do I need to turn off the vacuum cleaner at night?
This is a controversial issue, and the manufacturer doesn't recommend turning off the robot vacuum cleaner every day, but it's also not ideal to keep it on standby for months.
✅ Leave it on if:
- 📅 You have a daily cleaning schedule (for example, in the morning).
- 🏡 The vacuum cleaner is on the charging base (in this case, the energy consumption is minimal).
- 🔄 You use voice control or remote launch via the application.
❌ Turn it off completely if:
- ✈️ You’re away for more than 3 days (even in deep sleep, the battery goes down).
- 🔧 Planning to clean or repair (such as filter washing).
- ⚡ The house turned off electricity for a long time (the base will not be able to recharge the vacuum cleaner).
Lithium-ion batteries Xiaomi Vacuum Mop Pro designed for 500-800 Charging cycles. Constantly in mode. 100% charge 0% It reduces that time, and it's the best storage level — 40-60%. If you do not use the vacuum cleaner for more than a week, it is better to turn it off and recharge it before 50% before storage.
💡
To check the current charge level without the vacuum cleaner, look at the indicators on the case: one blink – 25%, two – 50%, three – 75%, four – 100%.
6.How to turn off the vacuum cleaner during cleaning
If the Vacuum Mop Pro has already started cleaning but you urgently need to stop it, there are a few options:
🛑 Suspend cleaning:
- 🔘 Press one power button (short) – the vacuum cleaner will stop but remain on standby.
- 📱 In the Mi Home app, click "Pause" (button with two vertical sticks).
⏹️ Interrupt cleaning and turn off:
- 🔕 Hold the power button for 5 seconds (as in a standard shutdown).
- 🏠 The vacuum cleaner will not return to the base - it will have to be carried manually!
⚠️ Attention: If you interrupt cleaning in the middle of the cycle, the map of the room may not be saved correctly. Next time the vacuum cleaner may "forget" part of the room or start cleaning from scratch. To avoid this, let it complete the current session or manually return to the base.
🔄 Back to base and off:
- In the Mi Home app, click "Return to Dock".
- Wait until the vacuum cleaner completes the movement and stands on charging.
- Now it can be turned off by a button or left in standby mode.
💡
The only last resort is to interrupt the cleaning with the power button, and the best option is to use an app pause or a return command.
7. Frequent mistakes and how to avoid them
Many users make the same mistakes when turning off the Xiaomi Vacuum Mop Pro.-5 problems and how to solve them:
🚫 Mistake 1: Turn off the vacuum cleaner immediately after cleaning, preventing it from returning to base.
✅ Solution: Always use the Return to Dock command in the app or wait for automatic return. This will save the map of the room and prolong the life of the battery.
🚫 Error 2: Leave the vacuum cleaner on the carpet off.
✅ Solution: Keep the robot only on a hard surface (tile, laminate) or on a base.
🚫 Error 3: Remove the battery without first shutting down.
✅ Solution: Always hold the power button for 5 seconds before removing the battery, otherwise you risk damaging the controller.
🚫 Mistake 4: Ignore error signals (e.g. flashing red) and force the vacuum cleaner to turn off.
✅ Solution: Check the error code in the instruction or application. Often the problem is solved by cleaning the sensors or restarting the device.
🚫 Error 5: Turn off the vacuum cleaner during firmware update.
✅ Solution: Never interrupt the update! Wait until it's finished (the indicator flashes blue) and then turn off the device.