How to turn off the vacuum cleaner Xiaomi: instructions for all models

Smart home owners often face the need to completely shut down the device, whether for a long trip or fixing software glitches.The question of how to turn off the Xiaomi vacuum cleaner seems simple, but there are nuances in the smart home ecosystem that are important to consider to extend battery life.

Modern cleaning robots, such as the Roborock S5 Max or Mi Robot Vacuum-Mop 2 Pro, are designed to consume minimal power in standby mode. However, a complete power outage is sometimes necessary to restart the system or conserve machinery. In this article, we will discuss all available methods of stopping your device.

Before you start manipulating, it’s worth noting that most models automatically go to sleep after cleaning is complete.Forced shutdowns are rarely required, but knowing this process will help you better control the gadget.

Physical shutdown of the power button

The most obvious and reliable way to stop the device is to use a hardware button, which is located on the body of most Xiaomi and Roborock models, often near status indicators or under the protective cover of the charging compartment.

To perform the procedure, press and hold the power button for 3-5 seconds, you hear a characteristic beep, and the indicators go out, which action breaks the power chain of the main board, putting the device into a state of deep sleep.

• 🔘 Press and hold the power button until the beep.
• 🔋 Make sure that the battery lights are completely gone.
• 📱 Check the status in the app – it should change to “Offline” or “Sleeping mode»

⚠️ Note: Do not use sharp objects to press buttons so as not to damage the membrane or protective coating of the case.

It's important to understand the difference between short press and long press. Short press usually starts cleaning or puts the device on pause, whereas long hold initiates a complete shutdown. If the robot is at the charging station, it can ignore the shutdown command while continuing to charge.

Management through the Mi Home app

Digital control techniques provide more flexible capabilities, especially if the device is in another room.Mi Home or Xiaomi Home software allows you to control the state of the robot remotely using a Wi-Fi connection.

In the application interface, the status of the device is displayed in real time. To turn off the robot, go to the main page of the device and find the stop button. In some versions of the firmware, this feature can be hidden in the additional settings menu or indicated by the power icon.

Using the app also allows you to set your schedule so that the device doesn't turn on at unwanted times, an effective alternative to manual shutdown that keeps the statistics of cleaning and map settings.

Keep in mind that software shutdowns don't always mean total power outages; the robot can go into low power mode while continuing to monitor the status of the sensors; and a combination of methods is better for a complete system reboot.

Features of models with a charging station

The behavior of the robot vacuum cleaner depends on its location in the dock. When the Xiaomi Vacuum is on the base, the priority mode of operation is charging, and the commands to turn off can be blocked by the battery management system.

If you want to stop charging and turn off the device, you first need to take it off the base, and then you can use the standard power button procedure. Some models, like the Roborock S7, have algorithms that prevent you from turning off the base to avoid undercharging.

The logic of the manufacturers is simple: the device must be ready to clean at any time, so a complete shutdown is only possible outside the charging station or requires specific actions in the settings menu.

Conservation mode with long-term simple

If you plan to go on vacation or not use a vacuum cleaner for a few months, a conventional shutdown may not be enough. Lithium-ion batteries used in Xiaomi have the property of self-discharging, and a deep discharge can disable the battery.

It is recommended to charge the device to a level of 50-60% before long storage. After that, completely turn off the power button, it is better to store the robot in a dry place at room temperature, away from direct sunlight.

• 📦 Clean the dust container and wash the filter
• 🧹 Remove and clean the main brush from the hair
• 🔋 Charge the battery to 60% before switching off
• 🌡️ Provide storage temperature from +10. +25°C

⚠️ Warning: Do not store a fully discharged robot vacuum cleaner for a long time, which can lead to irreversible degradation of the battery cells.

Every 2-3 months, it is recommended to take out the device, charge until the full cycle and turn off again, and this prevention will help maintain the battery capacity for many years of operation.

Forced reset and discharge

Sometimes the robot vacuum cleaner stops responding to commands or freezes, and in such cases, a forced reset is required, which is not a normal shutdown, but an emergency method of restoring the system.

For most Xiaomi and Roborock models, the procedure looks the same: you need to simultaneously press the Home and Power buttons (or only Power for 10-15 seconds) until the device emits an audible signal to start a reboot.

This method is safe for electronics, but interrupts the current map of the room if cleaning was going on at this point, and once turned on, the robot may require re-positioning on the map.

💡

If the robot is getting stuck during cleaning and doesn’t respond to buttons, try turning it over and removing the battery (if the model allows), then inserting it back in.

Using resets helps cache temporary data that could have caused a bug in the navigation algorithms. If the problem is repeated often, it is worth checking firmware updates.

Frequent Questions and Answers (FAQ)

💡

Proper control of on and off cycles extends battery life and maintains the efficiency of navigation sensors.