How to turn off the robot vacuum cleaner Xiaomi Mi Vacuum Mop: all the ways and nuances

Xiaomi Vacuum Mop robots (including Mi Robot Vacuum-Mop P, 2 Pro, 2 Lite, SE, and others) have become an integral part of smart homes. But even such advanced devices have nuances in management — especially when it comes to the basic action: turning off. It would seem that it could be easier? But an incorrect shutdown can lead to malfunctions, battery drainage, or even damage to the navigation system.

In this article, we will discuss all the official and alternative ways to turn off the Xiaomi Vacuum Mop, including emergency situations (for example, when the robot is stuck or does not respond to commands). You'll also learn why you can't just pull the plug out of the socket, how to properly prepare the device for long-term storage, and what to do if the vacuum cleaner doesn't turn off at all. MIUI Robot 2023-2026.

1. Standard shutdown through a button on the body

The most obvious way is to use a physical power button, which is located on the top panel of the case (usually on the right or in the center) on all Xiaomi Vacuum Mop models.

• 🔘 Press the power button once and hold it for 3-5 seconds until you hear a beep (one short beep).
• 🔋 Wait until the bar lights go out (it takes up to 10 seconds!
• 📱 If the vacuum cleaner is connected to the Mi Home app, the device status will change to “Offline».

⚠️ Attention: If the robot does not turn off after holding the button, but starts to emit repeated beeps, this is a sign of the system freezing. №4 (emergency shutdown).

On some models (such as the Xiaomi Vacuum Mop 2 Pro), the power button is combined with a return to base button.

💡

If you press the button, the vacuum cleaner starts moving to the docking station, you press too short. Hold the button for longer (up to 5 seconds) to initiate the shutdown rather than returning to the base.

2.Switch off via Mi Home/Xiaomi Home app

Remote control is one of the key benefits of Xiaomi smart devices, and you can turn off the vacuum cleaner directly from your smartphone, even if you're not at home.

1. Open the Mi Home app (or Xiaomi Home for newer versions).
2. Select your robot vacuum cleaner from the list of devices.
3. On the main control screen, tap the icon "Food" (usually stylized as the on/off button).
4. Confirm the action if a request appears.

📌 Important: For this method, the vacuum cleaner must be connected to Wi-Fi and not in cleaning mode. If the robot is performing a task, first suspend it through the application, and then turn it off.

In new versions of the firmware (starting with the 3.5.8_004024) The app has a Deep Power Off option, which completely shuts down the device, which is useful for the user:

• 🔋 Resetting battery errors.
• 🛠️ Diagnostics of malfunctions.
• ✈️ Preparations for transport.

3. Voice control (Alice, Google Assistant, Siri)

If your Xiaomi Vacuum Mop is integrated into the smart home ecosystem, you can turn it off by voice.

1. Make sure the vacuum cleaner is connected to the same Mi Home account as the voice assistant.

2. Tell one of the teams:

• 🎤 «Alice, turn off the robot vacuum cleaner (for Yandex.Station).
• 🎤 «OK Google, turn off Xiaomi Vacuum Mop (for Google Home).

⚠️ Note: Voice commands may not work if:

• 🔌 Vacuum discharged (charge below 15%).
• 📶 No connection to Xiaomi servers (internet issues).
• 🔄 The device is in the process of updating the firmware.

If the voice assistant answers, “The device is not responding,” check:

1. Connecting the vacuum cleaner to Wi-Fi (the indicator of the network should burn blue).
2. Privacy settings in Mi Home (Smart Home → Voice assistants)

Emergency shutdown: When the robot does not respond

Situations where the Xiaomi Vacuum Mop “hangs” or does not shut down in standard ways are rare, but require the right actions. Never pull the plug of the dock during cleaning – this can damage the battery and navigation system!

Method 1: Forced resetting

1. Press and hold the power button for 10-15 seconds until you hear a double beep.
2. Release the button and wait until the vacuum cleaner is completely turned off (the indicators will go out).

Method 2: Removal of the battery (for experienced users)

If the robot is completely locked and doesn't respond to the buttons, you can carefully remove the battery.

• 🔧 Turn over the vacuum cleaner and remove the bottom cover (unscrewing 4 Torx screws) T8).
• 🔋 Disconnect the battery connector for 10-15 seconds, then plug back in.
• ⚠️ Do not touch the battery contacts with metal objects!

📊 Below is a table with typical causes of “hang” and solutions:

5. Disconnection before transport or storage

If you plan to take a vacuum cleaner on a trip or clean it for long-term storage (for example, in the summer cottage), it is not enough just to press the power button. Incorrect preparation can lead to:

• 🔋 Deep battery discharge (if the charge is below 30%).
• 💧 Corrosion of contacts due to moisture residue after wet cleaning.
• 🛠️ Damage to moving parts (brushes, wheels) when shaking.

📋 Checklist before transportation:

Clean the dust container and water tank | Charge the battery to 50-70% | Remove side brushes and fix them in slots | Pack the vacuum cleaner in the original box or hard case | Turn off the cleaning timers in the application-->

🔹 Important for the battery: The optimal charge level for storage is 50-70%. A fully discharged or 100% charged battery loses capacity faster. If the vacuum cleaner will lie for more than a month, turn it on every 30 days for 10-15 minutes to maintain the charge.

💡 Tip: If you're carrying a vacuum cleaner on an airplane, check the airline's rules. Most allow lithium batteries up to 100 Wh (Xiaomi Vacuum Mop has 5200 mAh, which is the same as the one used by the company). ~38 Wh), however, some airlines require the battery to be removed and carried in hand luggage.

6. Frequent mistakes and how to avoid them

Even experienced users sometimes make mistakes when turning off the Xiaomi Vacuum Mop, which eventually lead to breakdowns.

❌ Mistake 1: Pulling the docking station plug during cleaning

This is the equivalent of pulling the cord out of the PC system unit.

• 🔄 Firmware failure (robot may stop turning on).
• 📉 Accelerated battery wear.
• 🗺️ Loss of the room map (will have to retrain).

❌ Mistake 2: Storage with an empty water tank

If you leave the tank dry for a long time, sealing gums can dry and crack. Always leave some water in the tank (10-20 ml) or lubricate the seals with silicone lubrication.

❌ Error 3: Ignoring firmware updates

Newer versions of Xiaomi software often fix power management bugs, such as firmware. 3.5.8_004024 fixing an error that kept the vacuum cleaner from turning off after cleaning was completed:

1. Open Mi Home → select a vacuum cleaner → “Settings” → “Firmware Update”.
2. Make sure the battery is over 50%.
3. Don't interrupt the process. It takes 5-10 minutes.

💡

If your Xiaomi Vacuum Mop suddenly stopped turning off after the upgrade, reset to factory settings (in Mi Home: Settings → Reset) and this will solve the problem 90% of the time.

FAQ: Answers to popular questions