It might seem easier than turning off a robot vacuum cleaner? But Xiaomi Mi Robot Vacuum, Dreame or Viomi owners often face unexpected challenges: the device does not respond to the power button, continues to clean after pressing, or suddenly turns on itself. The reasons lie in the features of the firmware, operating modes, and even in the design of the battery. This article will help you understand how to completely turn off the vacuum cleaner when it is really necessary - for example, for transportation, long-term storage or resetting.
We analyzed the instructions for 17 Xiaomi models (including lineups) S5/S6/S7, STYJ02YM, Dreame D9 viomi V3) and isolated 5 We're going to focus on the hidden nuances of why a vacuum cleaner can wake up at night, how to avoid battery discharge when stored, and what to do if the device is frozen. 80% In some cases, users make the same mistake when disconnecting through the application.
———
1. Classic button shutdown: where does it hide?
On most Xiaomi models, the physical power button is located on the top panel, but its appearance and functionality differ. 2 Lite (STYJ02YM) It's a circular touch zone with backlight, and in Dreame. D9 — The rule of thumb is that one short press usually stops cleaning and holds during the process. 3-5 Shuts down the device completely for a second.
———
⚠️ Warning: If the vacuum cleaner emits an audible signal after holding the button, but the indicators continue to burn, this is a sign of active standby mode. 2-3 In order to completely de-energize the device, you need to remove the battery (see section). 5).
———
- 🔘 Mi Robot Vacuum (1st generation): button on the right, hold 4 seconds to double signal.
- 🔘 Dreame D9/D10: touch button in the center, hold until the backlight is turned off (about) 3 sack).
- 🔘 Viomi V2/V3: mechanical button on the side, pressing with force is required.
- 🔘 Mi Robot Vacuum-Mop 2 Pro: Combined button (power) + reset), hold 5 seconds.
———
2. Shutdown via Mi Home/Dreame/Viomi app
Software shutdown seems like the most convenient way, but here lies the main trap: many users confuse the commands "Stop" (stop cleaning) and "Stop" (complete power out). In the Mi Home application, the path to the correct option depends on the firmware version:
———
- Open the app and select your vacuum cleaner.
- Go to the Office. → Settings (⚙️) → Nutrition.
- Press "Switch off" (not "Pause"!).
- Confirm the action - the device will emit an audible signal and go out.
———
Why does the vacuum cleaner turn on itself at night?
———
| Model | Annex | The way to the shutdown | Features |
|---|---|---|---|
| Mi Robot Vacuum 1S | Mi Home | Management → ⚙️ → Nutrition → Off. | Requires Wi-Fi connection |
| Dreame D9 Pro | Dreame | Main screen screen → ⋮ → Turn it off. | It works without the internet. |
| Viomi V3 | Viomi Home | The device → ⚙️ → Regimes → Off. | Supports voice control |
| Mi Robot Vacuum-Mop 2 | Mi Home | Management → ⋮ → Turn off power. | In some regions, the option is hidden. |
———
⚠️ Warning: After switching off through the application, the Xiaomi vacuum cleaner can remain in low power mode (the indicator blinks every 10 seconds). Complete power out requires physically removing the battery or holding the power button 10.+ seconds before discharge.
Voice control: "OK, Google, turn off the vacuum cleaner."
If your robot vacuum cleaner supports integration with Google Assistant or Alice, you can turn it off with a voice command.
———
- 🎤 Account Connection: The vacuum cleaner must be linked to the same account Mi/Xiaomi, as a voice assistant.
- 🔌 Online mode: The device must be connected to Wi-Fi (offline commands are not supported).
- 📛 Exact name: Use the device name from the app (e.g., "OK Google, turn off Mi Robot Vaccum in the living room").
———
💡
If voice commands are not working, check the region of the Mi Home account. Russia and CIS require a server Russia (MI) or Europe (EU).
———
Examples of work teams:
"Alice, tell Mi Home to turn off the vacuum cleaner" (for Yandex.Station).
OK Google Turn off Dreame D9 (Google Home)
"Hey Siri, turn off Xiaomi vacuum" (requires settings via HomeKit)
———
Emergency shutdown: when the vacuum cleaner is getting stuck or unresponsive
If Xiaomi's robot vacuum cleaner is stuck, continuously emitting beeps or not responding to commands, a forced reset will be required, and 90% of the time, the following sequence helps:
———
Hold the power button 10.+ second-to-dual|If it doesn’t work, turn the vacuum cleaner over and press the hidden button. RESET (usually undercover)|Remove the battery (a cross screwdriver is required)|Disconnect from the docking station (if connected)-->
———
Common causes of hanging:
Firmware conflict: For example, after upgrading from version 3.3.9 to 3.5.8, the Mi Robot Vacuum 1S may lose the reaction to the buttons.
Overheating of the engine: If the vacuum cleaner worked for more than 2 hours without a break (typical for models with wet cleaning function).
Sensor problems: Pollution of infrared sensors or falling from a height.
———
What if the vacuum cleaner does not turn on after discharge?
5. Complete power out: when to remove the battery
The only way to guarantee long-term shutdowns (for example, for transportation or storage) is to physically disconnect the battery, which also helps in deep discharge when the device is not responding to charging.
———
- Turn over the vacuum cleaner and unscrew the 4 screws on the bottom cover (usually under rubber legs).
- Carefully place the lid on a plastic card (do not use metal objects!).
- Disconnect the battery connector (white or orange connector).
- For storage for more than 3 months, it is recommended to discharge the battery to 40-60% (use cleaning mode until automatically shut down).
———
⚠️ Attention: In Dreame models D9 Pro and Mi Robot Vacuum-Mop 2 Pro battery soldered to the board. Trying to remove it without a soldering iron can damage the charging controller. In this case, use deep sleep: hold the power button for 15 seconds until the red indicator flashes.
———
| Model | Type of battery | Capacity | Retrieval method |
|---|---|---|---|
| Mi Robot Vacuum 1 | Li-ion, removable. | 5,200 mAh | Disconnect the connector |
| Dreame D9 | Li-ion, soldered | 5,200 mAh | Deep sleep mode |
| Viomi V3 | Li-ion, removable. | 3200 mAh | Unscrew 2 screws. |
| Mi Robot Vacuum-Mop 2 | Li-ion, modular | 5,200 mAh | Extract the block entirely. |
———
6. Automatic shutdown: timers and energy saving modes
Xiaomi
Sleep mode after cleaning: If the vacuum cleaner is idle for 30 minutes without commands, it goes into low power mode (the indicator goes out, but the battery is discharged in 1-2 months).
Deep sleep: Activated after 7 days of inactivity (only for models with 3.5.8+ firmware).
Low-charge auto-disconnection: If the battery level drops below 5%, the device shuts down on its own.
———
How to set up automatic shutdown:
1. In the Mi Home app, go to Settings → Schedule → More.
2. Activate the option "Energy saving" (not available in all regions).
3. Set downtime (e.g., "Switch off 1 hour after cleaning").
———
💡
The most reliable way to prevent spontaneous switching on is to turn off geofences and schedules in the application. Even when turned off, the vacuum cleaner can “wake up” due to push notifications from Xiaomi servers.
7. Frequent mistakes and how to avoid them
———
- ❌ Press the button once: This pauses cleaning, but doesn't turn off the vacuum cleaner. Right: hold on 3-5 seconds.
- ❌ Use of socket: Disabling the docking station from the network does not turn off the vacuum cleaner - it will remain in standby mode.
- ❌ Full battery storage: This shortens battery life.Optimum level — 40-60%.
- ❌ Ignoring updates: Firmware older than 3.3.9 has bugs with spontaneous inclusion.
———
⚠️ Warning: If the vacuum cleaner continues to squeak quietly (once per minute) after the shutdown, this indicates a failure of the collision sensor. In this case, calibration is required: flip the device, press and hold both side buttons (if any) for 10 seconds.
———
———