How to insert a cloth into a Xiaomi robot vacuum cleaner: the complete guide

Owners of modern cleaning devices often wonder how to insert a cloth into a Xiaomi robot vacuum cleaner to ensure high-quality wet floor treatment. This action seems simple, but has its own technical nuances, ignoring which can lead to improper operation of the gadget or even damage to the floors in the apartment. Proper installation of the element directly affects the efficiency of the wash and the life of the device itself.

In this article, we will take a closer look at the process of installing a wet wipe, the differences between electronically controlled water supply models and classic mechanical tanks, and you will learn why it is important to use only special materials and how to set up the device through an application to achieve the best result.

The current Xiaomi Vacuum and Roborock models offer different humidification systems, from simple gravity to intelligent vibration. Regardless of which version you get, the basic principle of cloth attachment remains similar, but the location of the mounts and the type of tank may differ. Let's dive into the technical details of the operation of your smart assistant.

Preparing a robot vacuum cleaner for wet cleaning

Before you know how to insert a cloth into a Xiaomi robot vacuum cleaner, you need to prepare the device itself. First of all, make sure that the main container for dry garbage is removed from the case. In most models, installing a water tank and installing a dust collector are mutually exclusive actions due to the design features of the compartment.

If a module is installed in the device HEPA-If you want to filter or take out the dust container, you need to take it out carefully. To do this, press the lock on top or pull the handle, depending on the modification of your Mijia Robot Vacuum.

It is also critical to check the condition of the main brush. Never leave a fluffy main brush inside the robot when installing a water tank, if the instruction for your model explicitly prohibits this, as some budget models do not have automatic carpet lifting and can soak the brush. Ideally, before starting wet cleaning, it is better to remove or replace the main brush with silicone if the design allows to avoid soaking the pile and the appearance of an unpleasant smell.

Check the bottom of the device for large rocks or debris that may have stuck in the wheels. Wet cleaning requires free wheelbase travel to keep the platform evenly adjoining the floor. Obstacles can cause the tank to skew and water to be unevenly distributed.

Types of humidification systems in Xiaomi models

Understanding the type of humidification system will help you insert the cloth and adjust the water flow. The company's devices are divided into several categories according to how they work. The first type is a gravity system where water is dripped by gravity through microholes in the bottom of the tank.

The second type is electronic pump control systems. In models like the Xiaomi Mi Robot Vacuum-Mop P, water is fed at a dosed pressure, which allows you to more accurately control the moisture of the surface. The third type is an ultrasonic or vibration sink, like in the flagship Roborock, where the rag makes thousands of vibrations per minute.

Each type uses a different method of attaching a napkin. Gravitational models often simply put the tissue on the tank as a case. More advanced versions use a magnetic platform or Velcro system. It is important to determine which class your device belongs to so that the attachments are not damaged.

Below is a table that helps identify the type of system by the appearance of the tank:

Type of system	The appearance of the tank	Principle of rag attachment	Examples of models
Gravitational	Plastic tank with rubber plug	Tightening like a case	Mi Robot 1S, Vacuum-Mop Essential
Electronic pump	Tank with electronic module and buttons	Velcro or clamps	Mi Robot Vacuum-Mop P, Pro 2
Vibrational	Square flat-bottomed module	Magnetic platform	Roborock S7, S8, Xiaomi X10+

Step-by-step instruction: installation of a tank and napkins

Now, let's get to the practical part and see how to put a cloth in a Xiaomi robot vacuum cleaner, as the most common design with a 2-in-1 tank or a separate module. First, remove the water tank from the robot body. If it's a combined tank, make sure that the dust compartment is empty or closed with a special partition.

Take a microfiber wipe. Notice its shape: it can be rectangular or have necklines under the wheels/mounts. Spread the fabric and slightly moisten it with clean water if the manufacturer recommends pre-soaking (although modern tanks impregnate the fabric automatically).

Put a napkin on the bottom of the tank. In Velcro models, combine the fluffy part of the Velcro on the tank with the soft part on the fabric. Smooth the fabric from center to edge so that there are no folds left. The folds on the rag can cause uneven washing and leave divorces on the floor.

☑️ Control of the installation of the wet module

Check for no folds on the fabricMake sure the valve is closed (if any)Tightly insert the tank before clickingCheck the free running of the wheels

Done: 0 / 4

Once the cloth is fixed, place the tank in the robot body, and the movement should be smooth, without excessive effort. You should hear the characteristic click of the locks. If the tank is tight, check if the cloth is wrapped inside the compartment.

Setting up washing modes in the Mi Home app

Once the module is physically installed, you need to configure the software part. Open the Mi Home app on your smartphone and go to control your device. The interface may differ depending on the firmware version, but the logic remains the same.

Find the cleaning section. Here you need to activate wet cleaning mode. In some models, it's a separate "Mop" button; in others, you can choose the type of cleaning on the menu. Set the desired water supply level: low, medium or high.

What do water supply levels mean?

Low level is for slightly wet wipes and sensitive coatings. Medium is for daily cleaning of dusty floors. High level is used for severe contamination on the tile or linoleum, but not recommended for laminate.> Also in the settings, you can activate the function "Only vacuum" for carpet areas, if your model has a map of the room. This will cause the robot to bypass the carpets or, in advanced models, automatically increase the power of suction and stop the water supply. Remember to save the settings. After starting the task, the robot will diagnose the system. If the sensors detect an error or send a notification to the device. The quality of cleaning depends not only on how you were able to insert a cloth into the robot vacuum Xiaomi, but also on the material of the napkin. Standard complete fabrics are made of microfiber of a certain density. Using cheap analogues can lead to poor absorption of dirt. It is strongly recommended to use conventional cotton rags or towels. They are too thick, can get stuck in the mechanisms and create excessive resistance to the movement of the robot. In addition, cotton can leave a pile that will clog aggressive filters, as it can cause a robotic suction of dirt, as a plastic suction components, it can cause to use shoes to damage to the metallices. If you use reusable wipes, you need to rinse them thoroughly after each cleaning and dry them in a straightened form, and the buildup of bacteria in the fabric will cause a musty smell during operation. Typical bugs and troubleshooting Even knowing how to insert a cloth into a Xiaomi robot vacuum cleaner, users often face problems. One of the most common is that the robot reports that there is no water tank even though it is installed. This can mean that the contacts are not tightly connected or the sensor is contaminated. ⚠️ Warning: If the robot makes a high-load sound and stops, immediately check if the rag is wrapped on the wheels or side brush. Another common mistake is to install a dry cloth on a tank already filled with water without first opening the valve (in models with mechanical plug). Water can spill into the housing when installed, which will lead to a short circuit. Always monitor the position of the silicone valve. If after cleaning you see wet spots or puddles, check the water supply level in the application. It may be exposed to the maximum for hard coatings, and you clean on the carpet or wooden floor. Also check the integrity of the microfiber itself: holes in the fabric lead to local moisture. In the event of an error "Replace consumables" in the application, reset the rag resource meter in the rag, it is possible that it is set up for a new wetage, if you simply install the water from the current cleaning system, and you simply remove the water from the damping. Stagnant water is the perfect medium for mold to breed. Once a month, do a deep cleaning of the tank. Rinse it with warm water with a little citric acid if you notice a white coating (scale). Carefully rinse and dry before your next use. 🧼 Regularly wash microfiber wipes at a temperature not higher than 40 degrees without using air conditioning for laundry. 💧 Use only room temperature water to avoid deformation of the plastic elements of the tank. 🔋 If you don't plan to use a wet cleaning for a long time, keep the tank dry and separate from the robot. Following these simple rules will allow your Xiaomi Robot to maintain the efficiency of the wash for many years. Proper operation is the key to cleanliness in the house. Can I wash my clothes in the washing machine? Yes, complete microfiber wipes can be washed in the washing machine. However, you should choose a delicate mode, the temperature is not higher than 40-60 degrees and turn off the pressing at high speeds. It is strictly forbidden to use air conditioners for laundry, because they clog the pores of the microfiber, and it stops absorbing water and dirt. What if the robot is carrying dirt on the floor? If the robot is smearing the dirt, most likely, the cloth is too dirty and has lost absorbency. Replace it with clean water, and it will help with the cleaning from the intensive use of the water. On average, manufacturers recommend changing consumables every 3-6 months with regular use. If the fabric becomes thinner, holes appear or it stops washing from contamination, replacement is necessary immediately. Why does the robot write "Install the water tank" even though it is standing? This error occurs if the magnetic sensor or contact pads do not see the tank. Check if the installation site is clean in the robot body and on the tank itself. Make sure that the cloth does not interfere with the tight fit of the contacts. If the persists problem, the sensor itself may be defective or the contacts have oxidized.