Owners of modern cleaning devices often wonder how to properly organize wet cleaning using the capabilities of their equipment. Xiaomi Mi Robot Vacuum models and their modifications, such as Roborock or Mijia, are equipped with a smart navigation system, but installing floor washing accessories requires understanding the design of the module. Many users make the mistake of simply throwing fabric on the floor, which leads to uneven moisturization and potential damage to electronics.
Proper fixing of a wet wipe not only ensures cleanliness, but also prolongs the life of the suction engine, preventing excess moisture from entering the housing. In this article, we will discuss in detail the process of mounting the platform, the selection of suitable materials and the settings necessary for the effective operation of the device in wet cleaning mode.
It is important to note that the procedure may vary slightly depending on the specific model of your vacuum cleaner, whether it is a classic Xiaomi Vacuum Mop or the more advanced Roborock S5. However, the general principle of attachment remains the same for the entire ecosystem of Xiaomi smart home, requiring only accuracy and adherence to the sequence of actions.
Preparation of necessary materials and tools
Before you start installing, you need to make sure that all the components are included in the delivery of your device. Standard platform for wet cleaning usually includes a metal or plastic base with mounts and a water tank. If you use third-party accessories, make sure that their dimensions correspond to the geometry of the bottom of the robot.
For good cleaning, you will need special reusable or disposable microfiber wipes. Using ordinary rags can lead to pile on carpets and clogging of filters. It is also worth preparing clean water, preferably filtered, to avoid scaling on the internal elements of the sprayer.
- 🧼 Special wipe made of microfiber of the appropriate size
- 💧 Distilled or filtered water for the tank
- 🔧 Platform holder (included in the set)
- 🧹 Water tank with electronic valve
Make sure that the work surface on which you will be assembling is dry and clean, so that you avoid foreign particles entering the attachment mechanisms, and the accuracy of preparation directly affects the efficiency of subsequent cleaning.
💡
Use only soft water to extend the life of the ultrasonic membrane humidifier in the tank.
Analysis of the design of the washing platform
The wet cleaning platform in Xiaomi devices is designed to minimize leakage risks. The main element is a water tank that has special openings to connect to a pump or valve (gravitational). Some models, such as the Mijia 1C, use an electronic water control system, which requires a more careful connection of contacts.
The platform itself is often equipped with Velcros or magnetic holders to fix the fabric. It is important to understand the difference between models with passive water supply (where the fabric is simply wet) and active systems with vibration. In the first case, the fabric is put on a frame, in the second – it must fit tightly to the bottom of the reservoir to transmit vibrations.
⚠️ Warning: Never use a wet cleaning platform on high-pile carpets unless the app prohibits entry into certain areas.
Check the bottom of the robot vacuum before installation, and there are contact areas where the device detects the presence of the washing module installed, and if the contacts are contaminated, the robot may not go into wet cleaning mode automatically.
Step-by-step: installation of the tank and fabric
The installation process begins with the preparation of the napkin itself. If you use reusable fabric, make sure it is clean and slightly moist. For disposable wipes, it is important to fold the edges correctly so that they do not hang or get stuck in wheels when moving.
Insert the water tank into the platform holder before the characteristic click. Make sure the sealing gums fall into place and ensure tightness. Then spread the cloth on the bottom of the platform, securing it with Velcro or clamps as provided by the design.
☑️ Algorithm of module installation
Now gently flip the robot vacuum cleaner or tilt it to access the bottom. Match the platform with mounting holes or guides to the bottom of the device. In most Xiaomi models, the platform is simply inserted into the slots and fixed with spring latches.
Make sure the module is fixed smoothly and doesn't hang around. If you hear a backlash, check if the locks are fully inserted. Incorrect installation can cause the module to fall off while driving around the apartment.
Configure the cleaning parameters in the application
After physical installation, you need to configure the software part through the Mi Home or Xiaomi Home app. Connect to the robot and go to the control menu. The system should automatically determine the installed wet cleaning module and suggest you choose the mode of operation.
You can adjust the water intensity in the settings, and there are usually three levels available: low, medium and high, medium intensity is recommended for tile or linoleum, and minimal for sensitive coatings, and you can also set the restricted areas so that the robot can go around the mats.
| Parameter | Description | Recommendation |
|---|---|---|
| Water level | Regulates the volume of fluid supplied | Medium for kitchen, low for living room |
| Cleaning mode | Algorithm of motion (zigzag, spiral) | Y-Trajectory for Best Results |
| No-go zones | Virtual walls in the app | It is necessary to zones around carpets |
| Suction power | Engine traction | Silence or Standard (for battery saving) |
Remember to update the map of the room if you change the arrangement of furniture. A smart mapping algorithm will help the robot plan the route more effectively with the new module.
Common errors in installation and operation
One of the most common mistakes is to use too much water when wetting a napkin, which causes puddles and can cause a short circuit at the bottom of the robot, and the fabric should be wet, but it should not leak water when you press it with your hands.
Another mistake is ignoring filter cleaning after wet cleaning, and fine dust, when mixed with water, turns into dirt, which clogs the pores. HEPA-This reduces the suction efficiency and can overheat the engine.
⚠️ Warning: Do not leave a platform with water inside the robot for long periods unless you plan to clean it up soon.
And users often forget to remove the module before they go on a carpet with a high pile, and even with virtual walls installed, sometimes a robot can go on a carpet, wet it, and stain the pile with dirt from a napkin.
What if the robot stopped seeing the module?
Care of the wet cleaning system
For the longevity of the device, it is important to regularly wash the tank and the platform itself. In the water, bacteria can multiply, which will cause an unpleasant odor during the next cleaning, it is recommended to wash the tank at least once a week with warm water with a mild detergent.
Pay attention to the condition of the humidifier membrane (if you have one in your model), it can overgrow with mineral deposits over time. Use citric acid dissolved in water to clean it, leave it for 15-20 minutes, then rinse thoroughly.
- 🚿 Wash the tank after each 2-3 cleaning
- 🌬️ Dry the platform in disassembled form
- 🔄 Change your clothes as you wear them (about once in a while). 3-6 months)
- 🧽 Clean the sensors on the bottom of the robot with a dry brush
Regular maintenance ensures that your Xiaomi Robot Vacuum will delight you with a clean floor and no divorces over the years.
💡
Timely replacement and washing of microfiber wipes is a key factor in the quality of wet cleaning and the absence of divorces on the floor.