Modern robot vacuum cleaners have long since ceased to be just devices for collecting dust from the floor, becoming full assistants able to maintain cleanliness in the house without human intervention. Xiaomi Vacuum Mop Pro model stands out among competitors with the presence of a wet cleaning feature that allows not only to collect dry debris, but also to wipe flooring with a wet cloth. However, many users face difficulties when first starting this mode, because activation requires the correct installation of modules and configuration in the application.
In this detailed guide, we will take every step you need to get your robot to start washing the floor, learn how to properly install a water tank, set up a zoning room map, and avoid the typical mistakes that can lead to carpet wetness or lack of water supply. Proper preparation of the device is the key to quality cleaning and durability of the gadget.
Before you start setting up, make sure your device is fully charged and connected to a Wi-Fi network.It is also worth preparing clean water in advance and, if necessary, purchasing original or compatible wipes for wet cleaning, as using inappropriate materials can damage the fluid supply system.
Preparation of the device and installation of a water tank
The first and most important step is to physically prepare the robot for wet cleaning. Unlike dry cleaning, it requires a special combined container that combines a dust collector and a water tank, and you need to remove the standard dry dust container, if it is installed, and replace it with a 2-in-1 module that comes with the Pro model.
It is important to understand that the water supply system works on the principle of gravitational or pump pressure (depending on the specific revision), so the tank must be installed tightly and before clicking. If the module gets curved, the water level sensor may not work, and the robot will not start the wash mode, continuing to work only as a regular vacuum cleaner.
- 💧 Remove the top cover of the vacuum cleaner and remove the container for dry garbage.
- 💧 Wash the water tank with clean water before first use to remove the manufacturing dust.
- 💧 Set the combined tank before the characteristic click and make sure it is fixed.
Once the module is installed, you need to check the status of the water supply valve, and there's an electronic valve at the bottom of the tank that opens only at the command of the processor, and make sure that the contact areas on the tank and inside the robot housing are clean and dry, as oxidation of the contacts can lead to system error.
⚠️ Warning: Never add aggressive cleaning products, chlorine or foaming liquids to the water tank.This can destroy the internal seals and disable the pump system, which is not a guarantee case.
Installation of a platform and wipes for floor washing
The next critical step is to properly install the wet cleaning platform. Complete with the Xiaomi Vacuum Mop Pro comes a special removable platform that attaches a reusable or disposable wipe. This platform has a design that ensures that the fabric fits evenly to the floor throughout the area.
To fix the platform, you have to flip the robot over, combine the platform mounts with the bottom of the body, and snap them. The design is designed to keep the platform from hanging around, but it's easy to remove for washing. Incorrect fixation can cause the robot to tow or unevenly wipe the floor.
☑️ Pre-launch checklist
Special attention should be paid to selecting and installing the napkin itself. The fabric should fit tightly around the platform without forming folds that can make it difficult for the wheels to move. If you use a reusable microfiber, make sure it is clean and wet, but not wet - squeeze it out before installing.
- 🧹 Spread the napkin on the platform, making sure there are no folds.
- 🧹 Attach the platform to the bottom of the robot before the snap of the locks.
- 🧹 Check that the wipe does not cover the fall sensors and side brushes.
Using the right fabric is critical to cleaning quality. Microfibre is best at trapping fine dust and avoiding smudges, while cotton fabrics can simply smear dirt. There are special impregnated wipes, but their use requires prior consultation with the instructions so as not to damage the floor covering.
Setting up the map and zoning in the Mi Home app
After you've been physically trained, you've got to go to software setup through the Mi Home app, and that's where the control magic happens: you can tell the robot where to wash the floor and which areas to bypass. All advanced features require you to build an accurate laser map of the room.
If the map of your room is already stored in the robot's memory, make sure it is up-to-date and error-free. In wet cleaning mode, it is especially important to correctly mark the areas with carpets, since the robot must automatically bypass them or increase the suction power if the carpet is not removed.
To create a wet-cleaning no-go zone (such as for a carpet or electronics area), follow these steps:
- Open the Mi Home app and select your vacuum cleaner.
- Go to the card settings (usually the card icon or “Settings”).
- Select the Virtual Wall or the Prohibited Zone tool.
- Draw a rectangle on top of the area that you need to exclude from the sink.
You can also choose the type of cleaning you want to do, you can use the wet wash mode, you can use the water only mode or the vacuum cleaner + water mode, and the first option is useful if you just need to wipe the floor without lifting the pile of the mats, the second one is for complex cleaning, and the intelligent system will determine the type of coating and adapt the behavior if the settings include the option of carpet recognition.
Adjustment of water supply level and intensity
One of the key features of the Xiaomi Vacuum Mop Pro is the electronic water level control. Unlike mechanical models, where the flow is controlled by a valve on the tank, here you can choose from three levels directly in the application: low, medium and high, which allows you to adapt the cleaning to the type of flooring.
For laminate and parquet, it is recommended to use a minimum water supply level so that moisture does not have time to penetrate the joints between the slats. For tile and porcelain, you can set a medium or high level, which will ensure better removal of dried stains.
| Water level | Expenditure (ml/min) | Recommended coverage | Time to work. |
|---|---|---|---|
| Low. | ~10-15 | Laminate, parquet, wood | 120 minutes. |
| Medium. | ~20-25 | Linoleum, vinyl, tiles | 90 minutes. |
| High-pitched | ~30-35 | Severe pollution, tiles. | 60 minutes. |
If you set a high suction intensity, the robot can move more slowly, which will lead to more moisture in one area, and experimentally select the optimal combination of parameters for your home.
⚠️ Warning: After cleaning, be sure to remove the water tank. Leaving the water in the tank for a long time (more than 24 hours) can lead to unpleasant odor, bacteria multiplication and acidification of the supply valve.
Starting cleaning and managing regimes
Once you've set up, you can start the cleanup directly, and you can start the cleanup in a number of ways: through a button on the device body, through voice assistants (if you're configured), or, most conveniently, through the Mi Home app, and running it through your smartphone gives you full real-time control of the process.
In the application interface, select Wet Cleaning or Cleaning + Cleaning. Before starting, the system will perform a short diagnostic: check for a water tank, battery level and sensor status. If all is well, the robot will be removed from the base and start moving along a given route.
Sequence of actions for launch:
1. Open the Mi Home app.
2. Click on the vacuum cleaner icon.
3. Select the "Water" or "Vacuum & Mop" mode.
4. Press the "Start" button (Start).)When you're working, you can pause the device at any time, send it to the base to recharge or change the cleaning mode. The app will display the current status: "Move," "Perimeter Cleanup," "Return to base." If the robot detects the carpet in "Water Only" mode, it will automatically circle it.
What to do if the robot is stuck?
Maintenance and care after wet cleaning
The end of the cleaning cycle is not the end of the process, but the beginning of the maintenance phase. The proper care of the wet cleaning components will prolong the life of the device and ensure the hygienic process. The residue of water in the tank is the ideal environment for mold development, so they must be removed immediately after work.
Remove the platform with a napkin and rinse the fabric under running water. If a disposable napkin was used, dispose of it. It is also advisable to wipe the platform with a wet cloth to remove the sticky dirt that may have fallen on it from the floor.
- 🛁 Drink the water from the tank and dry it open.
- 🛁 Wash and dry a reusable wipe or replace a disposable one.
- 🛁 Wipe the contact groups and the bottom of the robot with dry cloth.
Once a month, a deeper cleaning is recommended, and a special cleaning agent for robotic vacuum cleaners (not foaming!) can be used to fill the tank instead of water, which will help remove mineral deposits from the internal tubes and valves.
💡
To make the wipe dry faster and not acquire a musty smell, use a magnetic holder (if any) or just remove the platform and hang the fabric to dry vertically.
Solving water supply problems
Even with the right setup, users may find themselves in a situation where wet cleaning is not done properly, the floor remains dry, or, conversely, puddles form, most often the problem lies in a clogged exit or air traffic jam in the feed system.
If you notice that the wipe remains dry, check whether the outlet is clogged with mineral deposits. Carefully clean it with a soft brush or toothpick. Also make sure that the tank lid is sealed - a vacuum disturbance can block the water supply.
⚠️ Warning: Do not attempt to clean the internal water supply channels with metal objects or wire.This can damage the soft silicone tubes inside the tank, causing water to leak directly onto the robot's electronic circuit board.
In case the robot leaves too much water, check the feed level settings in the app and make sure you use recommended wipes. too thin a fabric can let excess moisture through, creating puddles, while a dense microfibre distributes the water evenly.
💡
Regular check of the condition of the exit valve and use of filtered water significantly reduce the risk of blockages and prolong the service life of the humidification system.