How to turn on the humidifier Xiaomi Smartmi Derma: instructions with photos and videos

The Xiaomi Smartmi Air Humidifier Derma (JSQ01ZM and JSQ02ZM models) has become one of the most popular smart home devices thanks to its combination of compactness, quiet operation and integration with the Mi Home ecosystem. However, even with such a simple at first glance gadget, the first launch can raise questions: how to properly connect the tank, configure modes through the application or avoid errors when connecting to Wi-Fi.

In this article, we will analyze the step-by-step algorithm for including the Xiaomi Derma humidifier - from unpacking to calibrating the sensors, and also reveal the nuances that the manufacturer often misses in the official instructions. For example, why can the device not turn on after pouring water or how to reset the settings if the connection to the network is frozen? E1, E2, E3) and ways to eliminate them without contacting the service center.

1. Preparation of the humidifier for the first inclusion

Before connecting Xiaomi Derma to the socket, you need to follow several mandatory steps, neglecting them can lead to malfunctions or even breakage of the device.

Start by unpacking and inspecting the kit.

• 📦 Main humidifier block with cover
• 💧 Removable water tank (usually transparent or semi-transparent)
• ⚡ Power cable with adapter (if the model supports wired connection)
• 📄 Short instructions in several languages (including Russian)
• 🔧 Water filter (in some configurations, for example, Derma) JSQ02ZM)

Important: if the kit is not a filter, it must be purchased separately - without it, the life of the device is reduced by 2-3 times due to scale and bacteria. The original filters for Xiaomi Derma have the article DM-FILTER01.

Next, wash the tank with warm water with a mild detergent (no abrasives!) and dry it. This will remove the production dust and possible chemical residues. Do not use aggressive cleaning products - they can damage the plastic or leave the smell.

💡

If there are stains left in the tank after washing, wipe it with a solution of vinegar (1:1 with water), then rinse thoroughly. This will also help disinfect the container before first use.

2. Water pouring and filter installation

One of the most common mistakes when first turned on is to pour water incorrectly.The Xiaomi Derma humidifier is sensitive to liquid quality, so use only:

• 💧 Distilled water (optimum option)
• 💦 Filtered water (if hardness does not exceed 3 mg-eq/l)
• ❌ Prohibited: tap water, mineral water, liquids with flavors

Instructions for pouring:

1. Remove the top lid of the moisturiser by pulling it up.
2. Remove the tank and turn it over. At the bottom, you'll see a water hole.
3. Install the filter (if it is included) in a special slot inside the tank.
4. Fill the container with water to the MAX mark (usually 4-4.5 liters).
5. Carefully insert the tank back into the base, combining the guide grooves.

Critical error: If you pour water into the main unit (rather than the removable tank), immediately turn the device over and drain the liquid. Water hitting the electronic components can cause a short circuit.

3. Network connection and first activation

After installing the tank, connect the humidifier to the socket using an adapter (if the model is wired) or install batteries (for portable versions).

To activate the device:

1. Press and hold the power button (usually marked with a symbol) ⊙) within 2-3 seconds.
2. Wait for the beep (one short beep) and the indicator blink.
3. If the device does not respond, check: 🔌 Correct connection to the socket 💧 Water level in the tank (must be not lower) MIN) 🔄 Density of the tank adjacent to the base

After successful activation, the humidifier will automatically switch to automatic operation mode (unless otherwise configured), the display will display the current humidity level in the room (if the model supports the built-in hygrometer).

4. Connect to the Mi Home app

To fully manage the Xiaomi Derma humidifier through the smartphone, you need to connect it to the Mi Home application (or Xiaomi Home for new versions).

• 📱 Remotely turn on/off the device
• 📊 Monitoring the humidity level in real time
• ⏱ Set up a work schedule
• 🔄 Update firmware

Step-by-step:

1. Download and install the Mi Home app from Google Play or the App Store.
2. Sign up or sign in to your Xiaomi account.
3. Press + → Add the device → Air humidifier.
4. Select the Smartmi Air Humidifier Derma (or JSQ01ZM/JSQ02ZM).
5. Follow the instructions on the screen: turn on the humidifier, hold the Wi-Fi (or Reset) button for 5 seconds until the indicator starts flashing orange.
6. Connect to the device’s temporary Wi-Fi network (the name will be type) Xiaomi_XXXX) and go back to the app.
7. Select your home Wi-Fi network (2.4GHz only!) and enter your password.

⚠️ Note: Xiaomi Derma Humidifier does not support 5GHz connectivity. If your router is running in two bands, temporarily disable 5GHz or create a separate network for 2.4GHz.

Adjustment of operating modes

Xiaomi Derma humidifier offers several modes of operation, which can be configured both from the control panel and through the application:

To select the regime:

• 📱 Through the application: go to the device card → Regimes → pick out.
• 🎛 From the panel: briefly press the mode button (usually indicated by the drop or sun icon).

⚠️ Warning: If the humidifier suddenly stops working in Auto mode, check the humidity sensor. Sometimes it gets polluted with dust - gently wipe it with a cotton swab dipped in alcohol.

6. Common errors and their elimination

Even when switched on correctly, the Xiaomi Derma humidifier can give out errors.

If the humidifier does not turn on at all:

1. Check the power outlet and cable (try another device).
2. Make sure the power button is not locked (some models have a safety lock).
3. Reset: Hold the Reset (or Wi-Fi) button for 10-15 seconds until the double signal is triggered.

💡

If the humidifier doesn’t connect to the Mi Home after reset, remove it from the app and add it again. Sometimes rebooting the router helps (especially if you’ve had problems connecting other Xiaomi devices before).

7. Operation and care advice

To make the Xiaomi Derma humidifier last longer, follow these recommendations:

• 🕒 Change the water daily (even if the tank is not empty) and stagnant water becomes a breeding ground for bacteria.
• 🧼 Clean the tank once a week with a weak solution of citric acid (1 tsp. per 1 liter of water).
• 🔋 Use original filters – analogues often miss small particles that clog the membrane.
• 🌡 Place the device on a flat surface, 30-50 cm from walls and furniture for even vapor distribution.

For deep cleaning (once a month):

1. Disconnect the device from the network.
2. Pour the water and flush the tank.
3. Pour the vinegar solution (1:1) and leave for 30 minutes.
4. Rinse and dry thoroughly.

💡

If the humidifier starts to make gurgling sounds, it's a sign of air accumulation in the tank. Turn it off, shake the water tank and set it back.

FAQ: Frequent questions about Xiaomi Derma