How to turn on the mop Xiaomi: detailed instructions with photos and tips

Xiaomi’s mop robots have become an integral part of modern smart homes, combining the functionality of a vacuum cleaner with the ability to wet cleaning. However, even such a simple device can raise questions for new users — especially when it comes to first switching on. Incorrect activation often leads to connection errors, sensors malfunctioning or even battery damage.

In this article, we will discuss not only the basic steps to include the Xiaomi mop (including the popular Mi Robot Mop 2 Pro, Viomi models). V3 and DreameBot W10), But also the nuances that the manufacturer doesn't mention in the official instructions, such as why the device might not respond to the power button after a long storage period or how to avoid failures when synchronizing with the Mi Home app. Special attention will be paid to the diagnosis of typical problems - from flashing indicators to Wi-Fi connection errors.

Preparation of Xiaomi mop for the first inclusion

Before you press the power button, you need to follow several mandatory steps, neglecting them can cause the device to either not turn on or start to malfunction. For example, if you do not remove transport clamps from the brushes or install a water tank, the robot will give an error. E5 (blockage) or E10 (lack of water).

Here’s what to do before turning on:

• 📦 Unpack the device and check the completeness: the mop itself, the docking station (if any), the power supply, the water tank, wipes for cleaning, brushes and instructions.
• 🔋 Connect the dock to the outlet (if it comes with a set) and make sure the charging indicator lights up in blue.
• 💧 Wash the water tank with warm water (no detergents!) and dry it. This will remove possible industrial contamination.
• 🔄 Set your brushes and wipes according to the pattern in the instructions. Note that the side brushes should rotate in opposite directions.

If your model is equipped with a laser sensor (for example, Xiaomi Mi Robot Mop 2 Pro), avoid direct sunlight on it during the first turn on - this can cause a false alarm of the navigation system.

How to turn on the mop Xiaomi: step-by-step instructions

The process of turning on depends on the model, but the general scheme is the same for most devices. Below is a universal instruction suitable for robots with a power button on the body (for example, Mi Robot Mop 2 Pro) and touch control (like DreameBot). W10).

Step 1. Charge before first activation

Even if the battery is partially charged from the factory, the first power on is recommended only after 2-3 hours of charging at the docking station, which is due to the fact that the battery controller needs calibration. If you ignore this step, the robot can shut down after 5-10 minutes of operation.

Step 2: Enable the power button

• 🔘 Press and hold the power button (usually located on the top panel) for 3-5 seconds until you hear the beep.
• 🔊 Some models (e.g., Viomi) V3) Instead of sound, a white light light is lit.
• 📱 If the robot is equipped with a display (like DreameBot) W10), It will appear on the Xiaomi logo.

Step 3: Diagnostics of indicators

After turning on, pay attention to the color and behavior of the indicators:

Connecting Xiaomi mop to the Mi Home app

Without synchronization with the Mi Home app (or Dreame for some models), the robot will only work in basic mode - without the ability to adjust the schedule, cleaning zones or update the firmware. The connection process takes no more than 5 minutes, but there are nuances that many users are unaware of.

Step 1: Installation of the application

Download Mi Home from the official store:

• 📱 App Store (iOS)
• 🤖 Google Play (Android)

⚠️ Note: If you have a DreameBot model, use the Dreame app instead of the Mi Home app. Trying to connect it via the Mi Home will result in a Device not supported error.

Step 2: Creating an account

When you first launch the app, you will need to register a Xiaomi account. Use a real email, which you will need to restore access and sync data. If you have already used Xiaomi devices (for example, a smartphone), you can log in through your existing account.

Step 3: Adding a device

1. Click + → Add the device in the upper right corner.
2. Select the category Cleaning → Robot vacuum cleaner.
3. Make sure the robot is on and flashing blue.
4. Bring the smartphone to the robot – the application will automatically detect it via Bluetooth.
5. Connect the robot to a Wi-Fi network (only 2.4 GHz! 5 GHz is not supported).

💡

If the robot is not detected, try restarting it by holding the power button for 10 seconds, and check if the antivirus is blocking the Bluetooth connection.

Common Including Errors and Their Solutions

Even when following the instructions, users often encounter problems, and below is a list of common errors and ways to fix them, based on an analysis of feedback and appeals in support of Xiaomi.

Error 1: The robot does not turn on after charging

If the indicators do not respond to the pressing of the power button:

• 🔌 Check if the dock is connected to the socket correctly (the indicator at the station should burn).
• 🔋 Try connecting the robot to another power supply (if it is included in the kit).
• 🔄 Hold the power button for 15-20 seconds to reset.
• 📦 If the robot is new, check if the transport film is removed from the contacts of the battery (sometimes it blocks charging).

Mistake 2: Blinking a red indicator

Red signals a critical error, and it's a blinking signal.

• 🔴 1 blinking - blocked brushes or wheels.
• 🔴 2 blinks -- collision sensor problem. Wipe the sensors with a dry cloth.
• 🔴 3 blinks: water tank error. Remove and re-install it.
• 🔴 4 blinks or more - battery failure.

Error 3: Not connected to Wi-Fi

Network connection problems are usually related to:

• 📶 Wrong Wi-Fi frequency choice (the robot only runs at 2.4 GHz).
• 🔒 Passwords too complex (use only Latin characters and numbers).
• 🛡️ Blocking. MAC-Addresses in the router (turn off filtering) MAC).

Setup the first start: what to do right away

After successfully connecting to the app, take your time to start cleaning. First, perform the basic settings to avoid problems in the future:

1. Firmware update

Check for updates in the Device Settings section → Update firmware. Outdated software can cause:

• ⚠️ Incorrect operation of sensors.
• ⚠️ Loss of connection to the annex.
• ⚠️ Mistakes in map construction.

Calibration of sensors

For models with laser navigation (e.g. Mi Robot Mop 2 Pro), calibrate:

1. Place the robot on a flat surface (not on a carpet!).
2. In the app, select Settings → Sensor calibration.
3. Wait until the process is complete (the robot will rotate slowly).

3. Set-up of cleaning areas

To prevent the robot from cleaning unnecessary areas (such as carpets or children’s toys), create virtual walls:

1. In the app, go to the Map → Edit.
2. Click Add Zone and circle the areas that need to be excluded.
3. Save the changes.

💡

The first start of cleaning is performed in the "Easy cleaning" mode (in the application) so that the robot has time to build a map without overloading.

How to Turn Off Xiaomi Mop Right

Many users simply put the robot on charge without turning it off, which is not critical, but can shorten battery life.

Method 1: Power button

Hold the power button for 5-7 seconds until the indicator goes out. W10) switch off:

1. Press and hold the Home button (with the image of the house).
2. Wait for the beep.

Method 2: Through the application

At Mi Home:

1. Open the device card.
2. Press. ⋮ → Turn it off.

Method 3: Automatic shutdown

In the robot settings, you can activate the Auto-Disable option after 24 hours of inactivity, which is useful if you rarely use the device.

⚠️ Warning: If the robot is not in use for a long time (more than 1 month), remove the battery or store it with a charge of 40-60% in a cool place. Full discharge or 100% charge during storage reduces the battery life.

Tips for caring for Xiaomi mop after turning on

To make the robot last longer, follow these guidelines:

• 💧 After each cleaning, wash the water tank and wipe the sensors with a dry cloth.
• 🧹 Clean your hair and thread at least 1 time per week.
• 🔋 Do not leave the robot on charging for more than 24 hours – this reduces the battery life.
• 📱 Regularly update the firmware through the application.

If the robot is getting worse at cleaning, check:

• 🔍 Wear wipes (they need to be changed every 2-3 months).
• 🛠️ The condition of the wheels (they should not be covered with dirt).
• 📡 Clean laser sensor (wipe it with a cotton swab).

💡

For better slipping, add 1-2 drops of glass washing to cleaning water, which will reduce the friction of the wipes on the floor.

FAQ: Frequent Questions About Including Xiaomi Mop