How to turn on the washing mode on the vacuum cleaner Xiaomi: instructions for all models

Xiaomi vacuum cleaners are no longer just garbage cleaners, modern models feature a wet cleaning function that allows not only collecting dust, but also cleaning floors with a special water tank. However, many users face difficulties when first turning on this mode: the button is not active, the water is not supplied, the application gives an error. In this article, we will analyze how to activate the washing mode on different models of Xiaomi, Dreame and Viomi, which settings should be checked and how to avoid typical problems.

It is important to understand that not all Xiaomi vacuum cleaners support wet cleaning, for example, the base models of the Mi Robot Vacuum series (without the “Mop” in the title) are designed only for dry cleaning. Here are devices with P, T, S, or Mop indices (e.g., Xiaomi Mi Robot Vacuum-Mop 2 Pro or Dreame). D9) If you're not sure about your model, check the specifications on the official website or in the instructions.

It's also worth noting that the cleaning mode can work differently depending on the firmware and regional settings, for example, in some countries wet cleaning is disabled by default due to local safety regulations, but don't worry: 90% of the time, it can be activated manually through the Mi Home or Dreamehome app, and we'll go through all the options in detail.

Which Xiaomi models support the cleaning mode?

Before you try to turn on wet cleaning, make sure your vacuum cleaner supports it at all. Here is a list of popular models Xiaomi, Dreame and Viomi with moping (floor washing):

• 🏠 Xiaomi Mi Robot Vacuum-Mop P – the first model with support for wet cleaning, 200 ml tank.
• 💧 Xiaomi Mi Robot Vacuum-Mop 2 Pro - improved version with adjusting the intensity of water supply.
• 🌟 Dreame D9 — flagship model with laser navigator and powerful suction (2700 Pa).
• 🔋 Viomi V3 — Budget option with automatic water refueling function.
• 🚀 Xiaomi Mi Robot Vacuum-Mop 2 Lite - Lightweight version without laser rangefinder, but with moping support.

If your model is not listed, check its name on the box or in the documentation. Note: some vacuum cleaners (for example, Xiaomi Mi Robot Vacuum). 1S) They have a connector for the mop module, but the module itself is sold separately, so you can buy the accessory first, and then follow the instructions for installing it.

It is also worth considering that even in supported models, the washing mode can be blocked due to:

• 🔄 Outdated firmware (requires an update via Mi Home).
• 🌍 Regional restrictions (e.g. in some EU countries, the function is disabled by default).
• 🔧 Incorrect assembly (poorly installed water tank or fabric nozzle).

Preparing the vacuum cleaner for wet cleaning: what to do before turning on the mode

Before you activate the cleaning mode, you need to properly prepare the device, and neglecting this step often leads to errors like "No water supply" or "Mop module not detected." Here is a checklist of mandatory actions:

Install a water tank (should click)

Attach the fabric nozzle to the bottom of the vacuum cleaner

Pour clean water (not above the maximum mark)

Check that the garbage container is empty and properly inserted

Update the firmware through the Mi Home app

-->

Pay special attention to the fabric nozzle. It should be tightly attached to the bottom panel of the vacuum cleaner, otherwise the water will not be evenly distributed across the floor. If the nozzle breaks or becomes severely contaminated, replace it with a new one (the article is usually indicated in the instructions), also make sure that there are no foreign objects (hair, thread) in the tank that can block the water supply.

Another important point is water quality, and Xiaomi recommends using distilled or boiled water to avoid lime plaque on the inside, and if you pour high-salt tap water, it can eventually lead to clogged pipes and broken pumps. In some models (e.g. Dreame) D9) There is a built-in filter, but it does not save from scale.

Distilled

Boiled.

Plumber water

Filtered (household filter)

I don't know/don't think so.-->

How to turn on the cleaning mode through the Mi Home app

The most reliable way to activate wet cleaning is to use the official Mi Home app (or Dreamehome for Dreame devices).

1. Open the Mi Home app and select your vacuum cleaner from the list of devices.
2. Go to Cleaning (or Cleaning in English).
3. Click on the Mop icon (usually stylized with water drops) or select Wet Cleaning mode.
4. Adjust the water supply intensity (if there is such a slider). For laminate or parquet, choose the minimum level, for tile - medium or high.
5. Start cleaning by pressing Start.

If the moping button is not active or is not on the menu, check:

• 📱 App version (upgrade to the latest in Google Play or App Store).
• 🌐 Account Region (some features are only available in the Chinese version of Mi Home).
• 🔄 Firmware vacuum cleaner (update through Settings) → Update of the PO).

In the Dreame models, for example, D9 or D10) The interface is a little different. Here, the cleaning mode is turned on through the Mopping section, where you can select the cleaning areas and the intensity, and these vacuum cleaners also have a deep cleaning function, which automatically increases the water supply in highly contaminated areas.

💡

If there is no mapping button in Mi Home, try changing your account region to China. To do this, go to profile, click on country and select (China). After changing region, you may need to reconnect the vacuum cleaner.

Activation of the washing mode from the remote or buttons on the body

Not everyone knows, but many Xiaomi vacuum cleaners allow you to enable wet cleaning without a smartphone - right from the physical remote or buttons on the case.

Mi Robot Vacuum-Mop 2 Pro and Dreame D9:

1. Press and hold the Clean (or Clean) button on the vacuum cleaner body for 3 seconds.
2. Wait for the sound signal (one long horn).
3. Briefly press the button again - the vacuum cleaner will switch to the moping mode (blue indicator will light up).
4. Press Start to start cleaning.

For Viomi. V3 Xiaomi Mi Robot Vacuum-Mop P:

1. On the remote, press the Mode button.
2. Choose an icon with a drop of water (usually the second or third in a row).
3. Confirm the choice with a button OK and start cleaning.

If the buttons don’t respond, check:

• 🔋 Battery charge (at a level below 20%, the washing mode can be blocked).
• 📶 Wi-Fi connection (in some models without a network, some functions are disabled).
• 🛠️ Cleanliness of contacts at the docking station (if the vacuum cleaner is not charged, it will not allow moping to be turned on).

Setting the intensity of water supply and cleaning areas

Activating the cleaning mode alone is not enough, you need to adjust the settings correctly, otherwise you risk either leaving the floors dirty or pouring water into them. The Mi Home app offers the following options:

You can also set up cleaning areas with different parameters in Mi Home, for example, for the kitchen, set high water intensity, and for the bedroom with parquet - low.

1. In the app, select the Map. → Cleaning areas.
2. Draw on the map the desired areas and Assign (assign) them modes.
3. Save the settings and start cleaning.

Important: if your vacuum cleaner supports the Automatic Water Refueling function (e.g. Viomi) V3), Do not fill the tank to the maximum mark - leave 10-15% If you refuel, water can spill into the body.

💡

For laminate and parquet, always use a minimum water supply. Excess moisture can cause the coating to bloat, especially if the joints between the panels are not sealed.

Common Mistakes and How to Avoid Them

Even after setting up properly, users often face problems with wet cleaning, and here are the most common mistakes and solutions:

⚠️ Warning: If the vacuum cleaner has started to leave wet marks or smear dirt, it is likely that the fabric nozzle is worn out or not properly fixed. Check its condition and replace it if necessary (the original nozzles serve as a replacement). 3-6 months with regular use).

• 🚫 No water: Check that the water tank is installed before clicking. Make sure it has water (sometimes the level sensor is not working correctly). Clean the pump filter (located under the tank).
• 💦 Floors remain dirty: Increase the water intensity in the settings. Check if the water holes on the fabric nozzle are clogged. Use special cleaning agents for robot vacuum cleaners (normal ones can foam and damage the device).
• ⚡ Vacuum shuts down during moping: Check battery power (at least 30% is required for wet cleaning); Update firmware - older versions had power-consumption bugs. Make sure water temperature is below 40°C (hot water can damage the pump).

Another common problem is that the vacuum cleaner gets lost on the map when you turn on the mapping, and this is because the damp fabric increases the resistance of the wheels, and the device starts to stall.

• Reduce the intensity of the water.
• Check if the coating is slippery (on glossy tiles, the robot can slip).
• Clean the wheels of dirt and hair.

⚠️ Warning: Never use aggressive cleaning products (such as chlorine or abrasive particles) to mop. They can damage the rubber tank seals and lead to leaks. Xiaomi recommends only special liquids for robot vacuum cleaners or diluted vinegar (1 tbsp). spoonful).

Additional features: schedule, voice control and integration with a smart home

The cleaning mode can be automated with a schedule or voice commands, for example, in Mi Home you can set up daily wet cleaning according to the schedule:

1. Go to the Schedule (Schedule).
2. Choose the days of the week and the time.
3. Specify the Moping mode and the intensity of the water.
4. Save the settings.

If you have a Xiaomi Smart Speaker or Google Assistant speaker, you can control the voice vacuum.

• Okay, Google, turn on the vacuum cleaner.
• Alice, start a wet cleaning in the kitchen.
• Hey, Mi AI, Determine the average intensity of water

To integrate with Apple HomeKit or Yandex Smart Home, you will need to install the appropriate plugins in the Mi Home.Please note that voice control of the detergent mode is not supported on all models – check compatibility in the characteristics of your vacuum cleaner.

💡

If you use Yandex Station, connect it to your Mi Home account through the “Xiaomi Smart Home” skill, and then you can say, “Start cleaning with moping at 15:00” and the vacuum cleaner will execute the command automatically.

FAQ: Frequently Asked Questions About the Cleaning Regime